Find an experienced handyman in Darlington

I need the following tasks completed by someone with carpentry/picture hanging skills: 1. Install hanger in wardrobe. I have the hanger but you need to supply the 4 screws needed. 2. Install hooks in the terrace brick walls to hang 5 paintings. You need to supply the hooks/inner brick plugs. 3. Fix the wire hanging on the back of one artwork so it can be hung. You need to supply the wire or other means to hang the artwork. I don’t have the tools to complete the job so you’ll need to bring your own drill etc. To be done Saturday 25 November in Darlington 2008, ideally in the morning. Quick job for someone in the area who has this equipment at the ready & knowledge of hanging in old brick. - Due date: Needs to be done on Saturday, 25 November 2023

2 locks asjusted, one lock replaced, handle added to a door, perpex glued to a door, one table assembled, garage door adjusted total 5 hours work - Due date: Needs to be done on Saturday, 11 November 2023

Erect an ikea floating shelf in to a brick wall. - Due date: Needs to be done on Friday, 3 November 2023

Repair door and door jam and lock after locked door broken in. - Due date: Flexible

I have 4 western red cedar outdoor chairs, 3 need the support 'beams' replaced, and probably one dozen new slats. I would prefer to get them repaired rather than throw away, but don't want to spend a fortune. I have attached a photo. I will repaint them once they are fixed. - Due date: Flexible - Ideally I would have them by Sat 4 November

I broke the wall by mistake on the moving day, now I need to repair it. Someone able to come with tools and a piece of plasterboard to do it would be amazing. We can discuss the price, no worries. - Due date: Flexible

I’m getting some screen doors installed on our upstairs balcony, but the phone line currently runs through the bottom of the door sill and will block the screen door from opening and closing properly so I need it relocated out of the way. I think it could be sunk lower into the sill so it is out of the way. Need someone to think through and implement this. Thanks. - Due date: Flexible

Please check the installation guide online before bidding! https://level.co/support/level-lock-plus Install level lock+ onto door frame; replacing existing night latch preferred. Must be a neat job. - Due date: Flexible

Take up two stairs and then hang a heavy full length mirror - Due date: Needs to be done on Sunday, 27 August 2023

Gyprock 1 wall, 1 bulkhead and 1 nib wall in line with the below scope DIMENSIONS (approximate) Wall 1 - 4m x 3.6m Nib Wall - 0.2m x 2m Bulkhead - 4.7m x 1m MATERIALS All lining materials shall be Gyprock Gyprock plasterboard shall be manufactured to meet the dimensional requirements of AS/NZS2588 ‘Gypsum Plasterboard’. LEVELS OF FINISH. All plasterboard lining, jointing and finishing shall be carried out to Level 4 Level of Finish, in accordance with AS/NZS2589.1 ‘Gypsum Linings in Residential and Light Commercial Construction – Application and Finishing’. FURRING CHANNEL Furring channel to be installed for Wall 1 and bulk head. Dot dab is acceptable for nib wall. JOINTING AND FINISHING Jointing and finishing of the outer layer of plasterboard shall be in accordance with CSR Gyprock Plasterboard Residential Installation Manual, NºGYP547.

Gyprock 1 wall, 1 bulkhead and 1 nib wall in line with the below scope DIMENSIONS (approximate) Wall 1 - 4m x 3.6m Nib Wall - 0.2m x 2m Bulkhead - 4.7m x 1m MATERIALS All lining materials shall be Gyprock Gyprock plasterboard shall be manufactured to meet the dimensional requirements of AS/NZS2588 ‘Gypsum Plasterboard’. LEVELS OF FINISH. All plasterboard lining, jointing and finishing shall be carried out to Level 4 Level of Finish, in accordance with AS/NZS2589.1 ‘Gypsum Linings in Residential and Light Commercial Construction – Application and Finishing’. FURRING CHANNEL Furring channel to be installed for Wall 1 and bulk head. Dot dab is acceptable for nib wall. JOINTING AND FINISHING Jointing and finishing of the outer layer of plasterboard shall be in accordance with CSR Gyprock Plasterboard Residential Installation Manual, NºGYP547. - Due date: Before Sunday, 13 August 2023

1. Assemble 2x Ikea PAX wardrobes (including fixing to wall) - Requires fixing to wall + skirting board removal - Adequate space in room for assembly 2. Installing of pet flap - requires cutting door [optional] 3. Measure, cut, and install a plank of wood above outdoor door. Including colour matching to paint bucket (see picture). - Due date: Needs to be done on Wednesday, 5 July 2023

Help me install panel above school gate Work on scissor lift Need safety shoes and a white card 3 hours tops - Due date: Needs to be done on Wednesday, 21 June 2023

I have a painting that needs hanging. Easy job. No longer than an hour’s work. - Due date: Before Friday, 30 June 2023

Hang mirror, picture and pool cue rack. - Due date: Needs to be done on Friday, 2 June 2023

Core drill 3 holes Need hard hat, hi vis & white card 1 x hole 50x50mm 2 x holes 100x50mm - Due date: Needs to be done on Tuesday, 18 April 2023

Replace zipper for bag please - Due date: Flexible

Comprises two BESTA wall units W 600 X H 380 X D 250. That is, a total of W 1200 for the entire two units. The units are mounted on a rail and fixed to the wall. The position is 100 mm below the TV and 200mm above the floor. The wall id gyprock and stud and there is a stud exactly at the centre.

I have a large unframed mirror I'd like to be mounted on a blank wall. The wall type is concrete block. The mirror is probably between 20-30kg. Measurements: 114cm width x 242cm tall. The back of the mirror is completely blank. No hooks or fixtures. - Due date: Flexible

Internal wooden supports holding the metal tracks of the drawers, were originally pre-screwed too low by the manufacturer (Troll baby furniture). Over time and weight of items inside the drawers, this has led to friction when the drawers opened and closed. The drawers now do not open without friction, and the metal tracks are loosely supported internally. We are seeking repair or replacement of the internal MDF support beams, so the tracks and drawers are firmly supported. Re-alignment of the holes for tracks may be required to prevent future friction. Someone handy - Due date: Flexible