Find an experienced flooring expert in Melbourne

I would like to buy vinyl in anyone sells and I would like it installed and removal for the current flooring

1. removal of carpet and underlay 2. removal of skirting boards 3. laying of engineered timber and acoustic underlay (approx 55sqm) 4. installation of new skirting board

Install floor boards for one bed room and walk in closet. The carpet has been removed and the floorboards materials are purchased and ready to install. Floorboards details could be found here: https://www.bunnings.com.au/smart-home-products-9-5mm-2-887m2-soundguard-acoustic-laminate-planks-camomile_p0371727 The bedroom is 3.4m by 3.4m and the closet is 1.3m by 1.4m.

Description: Need a professional installer to lay non-slip commercial vinyl flooring with coving (100 mm up-wall) for a small café kitchen (~14 m²) in Fitzroy. • Material: I can supply commercial-grade sheet/plank vinyl • Must meet food-safety standards (waterproof, seamless, slip-resistant) • Include labour + supply if you carry material • Timeline: within next 2 weeks preferred Key Requirements: • Experience installing vinyl in café/restaurant/kitchen • Provide portfolio or references for commercial installs • Able to prepare subfloor (level, clean) and finish edges • Flexible quote options: labour-only or materials-included Please quote estimated total cost and earliest availability.

Need someone to lay either engineered timber or laminate floors for approx 20 square meters. Happy for you to come look at job to give more fixed pricing

Need installation of commercial-grade non-slip vinyl flooring with coving for a small café kitchen (3.5m x 4m). • Area: 14 m² • Requirements: Waterproof, food-safe, coved 100mm up the wall, R10 slip rating or higher • Located in Fitzroy • Floor currently: ، timber or Please quote including materials + labour or labour only.

Require quotes for installation of new flooring in an apartment (located on St Kilda Road Melbourne). The area requiring flooring is approximately 45sqm (Bed 1, Bed 2, Dining, Living and kitchen). All existing carpet, underlay and grip boards have been removed and been disposed of. Concrete slab is clean and been filled where previous grip boards were removed. Depending on cost and timeframe to instal, I’d be happy to go with either: Option 1 – Install some variety of hybrid or vinyl sheet flooring. The bodycorp has been quite specific about the underlay needed (pre-approved underlay is the 5mm thickness CalmMat Acoustic Rubber Underlay). Option 2 – Install new grip boards, underlay and carpet throughout. The apartment is going to be a rental property so looking for cost-effectiveness, durability and timely installation. I am happy to source the products from a supplier if that helps save time. There is basement carparking on site (van size). I have some filler and caulk on hand (but will likely need some adhesives etc). Let me know if you need any further information to quote.

2 rooms: Remove existing carpet Clean and dry underneath Supply carpet (spec TBC) Install new carpet Both room sizes are approx 3.5m x 3.5m both with cabinet areas approx 3m x 0.6m

Install approx. 19m2 (max) flooring in St Kilda Road apartment before Monday. Price is negotiable, had to put something in, please put in your offers. We believe total apartment size is 23m2 however kitchenette and bathroom are tiled so it is only the bedroom, small hallway and lounge area that need doing. Beading can wait. Ideally install with a 5mm gap around the edges. Apparently this flooring has built in underlay. Added image with floor sizes. Looking to get the bedroom (6m2) and living (8.64m2)areas along with the hallway (approx. 4m2) up to the kitchen area.

I need budget carpet supplied and installed in a small bedroom (2.9m x 2.9m) in St Kilda. The old carpet has already been removed. Looking for: • A darker coloured carpet • Prefer solution-dyed nylon or polypropylene (must be moth-resistant – had issues with wool in the past) • Includes underlay and installation • Happy to use end-of-roll or leftover stock to keep the cost down Would like it done in the next week or so if possible. Please include your total cost in your offer.

I’m looking to get a quote for recarpeting my apartment. It’s one bedroom and a hallway. It’s not urgent so I’m happy to be flexible. The carpet is currently a light brown but I’m looking to install something similar to what’s in the communal hallway which is a dark charcoal.

Two rooms at 2700x 3500 mm. I will supply the boards and underlay. I will pull up the carpet and underlay so both rooms are clean, flat and ready to go. You will supply your own tools.

12sqm bedroom need floor installation, I have the laminate ready to go inside the apartment. Also one-side skirting board is needed. Thanks.

Need to remove existing carpet and lay floating floor board. Approx 25 sq m

Looking for someone experienced to lay new floorboards over existing floorboards in a small home office space in Prahran. Room Size: Approx. 2m x 3m (6m²) Materials Supplied: We already have the new floorboards ready on site Existing Floor: The new boards will be laid on top of existing floorboards – no removal required Room Status: Room is cleared and ready for the job Location: Prahran, VIC Photos: Attached for reference Deadline: Must be completed by 10am, Wednesday 9th April What You’ll Need to Bring: All tools and equipment needed to cut and install the boards Experience with floorboard installation over existing flooring Care for clean, professional work and tidy finish To Apply: Let me know about your experience with similar flooring installs Confirm you’re available to complete the job before the deadline Only apply if you're confident you can meet the timeline and deliver a quality finish.

Hi All, I’m in need of a small business to supply / installer / dispose carpets to bedrooms. We get approx. 6 or so of these rooms to do a month. I have all the specs and floor plans for quoting I need someone reliable and efficient to complete on going jobs.

Floor plan in last photo! I have purchased decorative moulding so be installed in the following rooms: - 2 x bedrooms - 1 x hallway - entryway - lounge room - small part of kitchen Second floor apartment. Walls are rendered brick. Old skirting has been removed. I have 24 lengths of 5.4m of skirting on-site in my garage. I have power available with a long extension lead for tools. I can help with some of the labour (such as taking cut pieces upstairs). Desperate for this to be done Friday as we are moving in Sunday and need time to paint it. The guy I had hired to do the job flaked on me :(

I have a lounge room that is currently carpeted and want to install solid wood Baltic pine floorboards. I have already acquired the floorboards and taken up the carpet. The floor underneath is MDF or particle board. I need a 2mm acoustic underlay put down and the flooring installed. I will supply the boards and underlay. Total area is 33sqm.

I have purchased some hybrid flooring which will be delivered to the apartment this week. I need someone to lay them, you will need to provide the materials they are laid on and with. I have removed all skirting. You will be laying in a lounge kitchen and a small hallway totalling approximately 24 square meters. The floor is concrete and requires not much prep, there are a few nails I was unable to remove. The flooring is Stonehaven Copper Oak 520 I think it’s Godfrey’s

vinyl on floor and half of the wall. i have the welding and the gvinyl already on site

Sand and polish timber floor in kitchen

A 2 Bedroom apartment with timber floorboards in the main living area requires maintenance, polishing and varnishing. Floors are scuffed by furnishing over time as per attached photos .

Requiring assistance in polishing living room area Flooring is made of engineered timber, can provide specifications for you to ensure it can be polished. Happy for you to come to inspect prior to works to make sure. Find attached floor plan, only living area to be polished.

Need to sand and polish approx 10sqm of Tasmanian oak flooring to match as close to new engineered flooring

Existing garage floor is smooth and intact. No repairs necessary. The epoxy coating is peeling and needs to be removed through grinding. Exposed concrete/ screws should be polished to shine. Work site is covered and enclosed. Water and power available.

Sand, stain and polish wooden kitchen floor to match living room floor. Currently it is a bit darker, and has some light areas due to kitchen remodel. No nails and fairly good condition floor. Quote should include all labour, materials and equipment.

I need the floors of my apartment sanded, polished and coated. Dimensions of each room are: 3620mm X 3600mm 3280mm X 3350mm

Need some work done to the concrete floor: -cut and polish 2 strips approximately 3 metres. -buff and seal the whole floor approximately 50square meters No hurry - to be complete sometime next week from 12th of May onwards

I need to sand & polish a dining table made of al old Chinese door

Quote Request – Sanding & Refinishing Tasmanian Oak Floors (48 m², Elwood) I’m looking to get a quote for sanding and refinishing approximately 48 square metres of Tasmanian oak flooring in a first-floor apartment in Elwood. Details: • Existing timber is Tasmanian oak • Floor is in reasonable condition, no major damage • Finish preference: [water-based / oil-based / open to advice] • No stairs involved • Ideally looking to book in the next week • No furniture to move Could you please provide: • A rough estimate (including GST) • Availability • What’s included (e.g., sanding, coating, number of coats, finish type) Looking forward to hearing from you.

Hi, I need someone who can clean the floorboards by sanding the timber floor and polishing it. Should take up to 2 hours? Open to negotiating price. Must be done tomorrow. And must have your own sanding machine, floorboard polish provided. Thanks:))

Cut and polish asap to remove paint overspray on my Alfa Julia in Pascoe Vale South

Sand and polish boards in a bedroom. Measurements are 3.6 m x 3.7 m

Kitchen was just renovated in our townhouse and I need the old areas that aren’t covered by the new kitchen sanded and polished but also would like to see how much the whole area would cost to be done

Polish has come off baltic pine boards and is exposed, need it repaired, and another small board to be replaced. Don't need all floor done.

We have a unit with staircase which needs to be sanded and polished at an estimated total of 55 m². Floorboards are in fantastic condition and do not need nail removal etc

I need concrete floors of an 800sqm property to be polished.

Sand and polish kitchen floor and hallway. Measurement for hallway 1.4 m (140 cm, 4′ 7″) Measurement 5.28 m (528 cm, 17′ 4″) Measurement for kitchen 5.72 m (572 cm, 18′ 9″) Measurement 9.31 m (931 cm, 30′ 6″) There is an island in the middle, the above dimensions are max width x length

I want to polish one room

Hello, My little coffee bar has polished concrete everywhere but this little hideous back corner. Looking for some help tearing up these old tiles and polishing the concrete underneath.

Open plan Living Kitchen Hallway -- wood flooring - needs sanding back and then varnished again

We’re moving into a new office space that has 110m2 of existing engineered timber flooring. The current finish is too dark so we would like the floor sanded back to oak and then re-stained in a light lime wash finish. All existing furniture items in the space will be removed prior to works commencing.

Require sand refinish with satin varnish 80sqm of timber flooring

Urgent time sensitive. Need asap start. Just bought house, have 10 days before need to move in. Floors need work. Description of task: EXISTING FLOOR: - have 46 square meters of chevron timber floor in apartment. Don’t like the colour - need floor sanded and refinished to match lighter Color of timber flooring in bedroom Install New Timber Floors in Bedrooms - have all materials purchased - would like to remove carpet in each bedroom (each room is 10 square meters) and install new timber flooring (materials provided) - the living room refinishing of floor should match the new floors for the bedroom as close as possible - plank installation concrete stick - linear pattern (not chevron) Whoever can start first is who I will book Cost being offered based on what I have been quoted by a company but they can’t start until later New floor installation: 50 per square meter - 20 square meters = approx 1000 AUD Existing floor sand and refinish 34 per square meter - 46 square meters = approx 1,500 Happy to negotiate Need someone who can start asap

25sqm living room area timber floor. There are stains soaked in so it needs sanding + staining + coating. Maybe just half of the area as the rest are covered by sofa and carpet.

Recently entered into contract for 2 bed apartment and preparing for the impending renovations/touch ups required before I can move in. Currently tenant in place for next 45 days so trying to secure everything in advance. Would like to have the carpet in the bedrooms removed and replaced with chevron engineered timber flooring (to match the living room). Also need to have the entire floor refinished. Its currently a dark brown/wood colour and I would like to change it to be like a grey frost. - Due date: Before Thursday, 2 May 2024

We require ~65sqm of vic-ash floorboards to sanded in a 2-bedroom house (with vic-ash stairs also needing refinishing). The wood has discoloured orange so we'd like to use a water-based finish eg. Bona traffic HD I have calculated floor areas (excluding bathroom & balcony and kitchen joinery) as follows; Ground Floor: 31m2 Upper Floor: 30m2 Stairs: 4.5m2 Total: 65.5m2 Start date: 01 February 2023