Find experienced local carpenters in Marrickville

I need someone with a laser measure tool to measure my existing kitchen so that I can take this to IKEA kitchen planner. I've done this already with a tape measure but essentially I want a check-measure to ensure I haven't missed anything.

I have an old deck that’s damaged so I’d like it removed and a new one installed. About 10m long, 3m width . Open to ideas but just want a nice outside area

Cut part of a shelf inside a kitchen cabinet in a flushed manner. I have included a photo with drawn lines on how the shelf should be cut off from the cabinet.

Wooden floor in livingroom has some scratches from my dogs, only few spots look worse, the rest is pretty good but might have to do the whole room. Sand and re-apply stain i guess or polish it

6m long Cornice was removed during kitchen renovation, now needs to be reinstalled. Cornice comes in two pieces and must join roof cornice at each end as shown in photos

Dismantle a kitchen in marrickville, then install in little bay. There will need to be some work done to fit Need to know how to install kitchens.

Our French boutique bed frame has had the wood joinery that holds up the bed slats, come away from the frame and needs repair.

We need to dismantle a built in wardrobe size: 250cm high, 60cm deep, 340cm wide. It is attached to the wall and possibly floor so may involve removing some plaster/gyprock - Due date: Before Monday, 12 February 2024

Hi! We are moving into a new place and would like a free standing cabinet built to house and hide our fridge. Rough dimensions of the fridge are: H:1137mm W:474mm Depth: 498mm It will some allowance for airflow. Please note this is a rental property and it must be free standing. Does not need to bear any weight. We just to make the fridge look like part of a single wall kitchen (please refer to the photo where the cabinet will be placed) Essentially the back, sides and top of the fridge needs to be covered. You'll have to provide all materials. - Due date: Flexible

Easyshed Bike Shed 2.25m x 0.78m with concrete fixings build onto existing slab in the backyard. Image of shed model included. - Due date: Needs to be done on Tuesday, 16 January 2024

I'm looking for someone to build a shed I've had delivered in my underground carpark, so no weather issues. This is the brand and model: Giantz Garden Shed Outdoor Storage Sheds Tool Workshop 1.94x1.21M with Base × 1 - Due date: Before Sunday, 7 January 2024

Our fridge does not fit into the fridge slot, due to the skirting board stealing a few cm of width. I need the skirting board (the length of the fridge)neatly removed and kept in tact, so landlord can reinstall in the future. Since it's a specific length, the skirting board may need to be cut so just that portion can be removed. A carpenter or handyman is probably what I am after for this. - Due date: Before Friday, 1 December 2023

We are taking on a new lease for our business and we want to replace the cabinets in the kitchen space. Old cabinets need ripping out and disposing of. We will only be adding new ones (pre-purchased) to the bottom row - cabinets will need handles attaching too. If you can change sink etc as well even better - Due date: Before Thursday, 14 December 2023

Make 40 small timber menu holders as per photos attached from plywood and pine DAR and delivery to Marrickville location completed. Dimensions & photos in drawings attached 9mm ply for the back standup section 3mm ply for the front stand up section 42 x 19 DAR pine timber for the base no painting required, I will do that part. - Due date: Before Friday, 24 November 2023

Replace timber decking with new composite timber or equivalent. Approx 3x1.5 deck with additional finishing around raised garden bed. Steps will remain as is. - Due date: Flexible

We someone who can weld Stainless Steel in a TIG weld, the job would be a frame that will go in to a food factory, the weld need to be high quality. We do have weld machines all gears, we need a trade, we have 1 frame to start but will have a few more later. Give me your fee, I will suggest the one hourly - Due date: Flexible

Newly bought, small shed, to be installed in back garden on concrete slab. - Due date: Needs to be done on Friday, 3 November 2023

Installation of small 1.5m x .8m Easy Shed - Due date: Flexible

Install a basic built in wardrobe White or cream 2.4 x 2.4 - Due date: Flexible

I need a handyman/carpenter to repair a burn stain cuased by a hot pan on a wooden kitchen bench top. See images. Happy to work around your schedule. - Due date: Flexible