Find experienced local carpenters in Epping NSW

My wardrobe long wooden base is damaged at one end and needs to be fixed. The single wooden base runs throughout the inside of the wardrobe from one end to the other. The bottom of the base has fixed cloth hangers. Please refer to attached photos of the broken edge inside the wardrobe. I need help to fix or replace with an exact same one. Looking for cost effective options only. Appreciate your help and let me know if you want to come and have a look as well, as I am not sure what you will need to fix it completely.

Description: I am looking for a professional installer to mount a TV and a heavy floating cabinet in a new (22-storey) apartment in Epping. Precision and structural safety are essential. Scope of Work: - TV Mounting: Wall-mount an LG G5 65" OLED (includes its own slim bracket). - Cabinet Installation: Wall-mount a 2.4m Majeston White Floating TV Cabinet (approx. 70kg) directly below the TV. - Cable Management: Hide all Power/HDMI cables behind the wall between the TV and cabinet. Power/data points are already located low on the wall where the cabinet will sit. Wall Specifications: - 13mm plasterboard on metal studs/furring channels (per building manual). - Structural Requirement: Because the cabinet is 70kg, I need your professional advice/quote on whether heavy-duty anchors are sufficient or if a timber backing board is required to distribute the load. - Aesthetic Note: If a backing board is used, it must be discreet or finished to match the high-gloss white polyurethane cabinet. Requirements: - Please confirm you have Public Liability Insurance. - Provide details on your workmanship warranty (duration and coverage). - Experience with heavy joinery and metal stud walls is a must. Reference Links: - TV: https://www.lg.com/au/tv-soundbars/oled-evo-tv/oled65g5psa/ - Cabinet: https://www.retrodesigns.com.au/floating-tv-cabinets/majeston-white-floating-tv-cabinet I have the TV and slim wall mount, cabinet and included brackets. Please provide a total quote. Thank you.

A Deck with 2 steps and 2 planter boxes

2 bathroom cabinets installation in 2 bathrooms. Remove mirror (no need to save the mirror while removing) then fix these cabinets. Cabinet size 80x95.

For the existing blank cabinet, I need thin 3 shelves/panels ( 4 inches breadth, 34 inches length), to be done, to hold small photo frames. One wood panel is available, it needs to be cut into 3 inches width and installed in the cabinet. Photo 1 shows ai image of what is needed. Currently it is blank. Image 4 shows the available wooden panel which is 12 inches width in total, which needs to be cut into 3 panels, 4 inches width each, smoothened and installed.

There is significant timber rot to a wall stud (possibly lintel as well) caused by long-term water ingress. Plaster has already been opened up and framing is exposed. Scope likely includes: - Remove and replace damaged timber - Check structural integrity - Reinstall plasterboard and trims - Make good ready for painting

Outdoor timer deck replacement. Currently with 35 pieces of Merbau, around 1.9m length and 90-100mm width for each. We can prepare the timber and structural pine

Hoping to cut the top section of a piece of wood around 2.9m long into a wavy line

Wooden baby gate, custom for a wide opening at the bottom of the stairs and top of stairs. Bottom of stairs is 154cm, top of stairs is 108cm opening. Can share photos to anyone who provides offers.

Need someone with wood work experience to help me build a study nook. The width of my area is 2.2m wide and it can fit a piece of benchtop that is 2.2m x 60cm wide. I can see bunnings sell several types of this size and i found two that is about $129 each or $359 which is the other photo. Im still deciding which piece of wood but you can quote me on the cheaper one of $129 x 2 for the materials. I would like 2 x floating shelves ( around 2.2m x 25cm to 30cm in width) no brackets to be exposed 1 x desk (2.2m by 60cm) 1 x 6cm hole drilled for my cables on top left corner of the desk I wanted the pieces of wood to match so you will need to cut one of the benchtops to make it 25cm to 30cm width. Can you please quote including the benchtop as it will be easier if you bought the materials. Thanks

I have bought a new shoe cabinet that needs to be installed. The product details are listed below: -Number of Shelves: 8 -With 2 Drawers -Material: Particle Board, Melamine, MDF/Chipboard - Dimensions: Item Length 120 cm Item Height 100 cm Item Width 35 cm

Hi, I am after Joinery Cappings / Mouldings to 4 x existing built in wardrobes. I'm also after a drawer front to match an existing desk

Existing dishwasher pictures and measurement attached. Replacing current drawer type dishwasher (Width 895mm) with free-standing Miele dishwasher (Width 600mm). Model G7604 Built Under SC Front AutoDos. Pictures attached - both the unit name and installation dimensions requirement. 1. Take out the existing dishwasher. 2. Prep the area for ‘Built-under’ Dishwasher 600mm width - picture attached the new DW model, dimensions requirements. This requires building an internal wall/panel so the new DW can be bolted on. 3. Trim/Cut from existing dishwasher door panel to fill the gap from (existing dishwasher width is 895mm minus new one width 600mm = 295mm width trim) **No need to install the new DW** Just need to prep the area so it’s ready to install by Miele technician.

There are some stains of paint on balcony tiles that need to be cleaned.

Current fully integrated dishwasher needs to be replaced with new. ( New machine spec attached) New Dishwasher will be installed by Miele Need work by carpenter or handyman 1. Take the front panel from existing machine and tailor/put onto the new. 2. This will leave 29.5cm gap (existing machine 895mm width vs new 600mm depth). Need to build new cabinet storage. Panel needs to match the existing. OR.. We could get built-in dishwasher 600mm (not integrated) and just build a cabinet

3 tier shoe shortage rack cabinet with additional compartments, Will review any quotes.

Small spot of engine oil needs to be removed as much possible from parking

Joiner to make custom designed laminated workbench /benchtop from 32 mm thick MDF for home office. 330 cm long, 85 cm depth, supported with 40 cm wide, 50 cm deep chest of drawers on either sides and shallow drawers (under the benchtop) in the middle, supply and install

We have an old kitchen we plan to replace in the next few years but want to install a dishwasher into an existing cabinet space near the sink. We need someone who can remove the cabinet cleanly but this does not have to be a beautiful perfect job, as the kitchen is old and soon to be replaced. Pictures try to explain, dishwasher to be places adjacent left of the sink, and the corner space to be opened up for access to the sink. Thanks!

Water stain from pot plant has been there for a while. Will need to paint match aswell.