Find experienced local roofers in Doncaster East

Looking for a professional roof tiler to do rebedding on one section of my roof. The previous owner has used silicone as a temporary measure which isn't good and it looks as though the surroundings areas are also loose. Only looking at doing this section for now unless there are other areas just as bad as this. Double storey home with terracotta tiles.

Need to fix roof of garage (box gutter and metal roof)

1800 x 1800 bathroom that needs the following- 1. 800x800 screed base 2. Waterproofing requires areas 3. Floor and wall Tiling

single-storey residential house "Tile", scope of works request 1) replacement of broken roof tiles/sheets where required, 2) Roof Cleaning and removal of moss, debris, and dirt buildup, 3) repointing and rebedding of ridge caps if necessary, 4) checking flashing and sealing around roof penetrations, 5) clean and paint protective coating. 6)

Replacement down pipe elbow and or shoe required on second storey downpipe end. Noisy when raining from sound of dripping water very loud. Just to reduce sound

Noticed a damp smell in bedroom; nothing visible. Looking at the roof there are some cracks along that corner along tiles/ ridge. An inspection for potential leaks or moisture issues and assessing cracked ridge capping is needed. The whole roof is about 120 m, its a single storey unit with concrete tiles.

Cleaning gutter for a double story townhouse

Cleaning roof gutters single storey house

Need someone to clean roof, repair any tile damage, clean gutter

There appears to be a leak from the garage metal roof, as the garage ceiling has one spot of mould on it. The mould has been here for few months and only grows a little bit bigger after several heavy rain recently. But don’t want it to become a bigger problem. We suspect it is leaking from a spot directly above, where on the garage roof sometimes rain water could be accumulated. Looking for an expertise to inspect, diagnose, fix the leak, patch and paint the ceiling once completed. But happy to further discuss the scope and cost if anything needs to be varied reasonably.

1. Tile Replacement Locations • Replace 1 tile located at/near the ridge area (possibly at an internal corner/valley junction). • Replace 1–2 tiles located nearby but not on the ridge. 2. Tile Type - see photo • Existing tiles are Boral concrete roof tiles. • I will supply: 2 full tiles 2 corner-cut tiles • Contractor may need to supply 1–2 additional tiles if required to complete the job properly. 3. Access Requirements • Property is a two-storey house. • Contractor must bring their own suitable tall ladder and safety equipment. • Preferred roof access from the front yard to minimise walking/traffic over roof tiles. 4. Workmanship Warranty • Provide a 2-month workmanship warranty for: • Tiles replaced • Tiles in all areas stepped on or accessed during the works • Warranty should cover displacement, cracking caused by work activity, or leaks resulting from the repair. Expectations • Work to be completed safely and without causing additional tile damage. • Ensure replaced tiles are properly seated and weatherproof. • Clean up any debris after completion

Water comes from chimney when raining, need to identify the leak and fix it.

Clean gutters and 2 valleys for a 4 bedroom single story house

We're hear animal scratching and moving sounds during the day, but mostly at night and believe it's a Possum situation we have, so need help to trap and remove the possum on our roof.

I need an experienced carpenter to remove two internal doors and hang two manufactured acoustic doors. The doors do not have any cuts in them so cuts for the handle and hinges will need to be made. All hardware (except heavy duty hinges) has been provided (door and seals). Intended outcome: Installation of 2 acoustic doors for maximum soundproofing to insulate 2 living rooms from central corridor. Door 1 Dimensions: 2340 x 820 x 38 Door 2 Dimensions: 2340 x 720 x 38 Purchased equipment: 2 x RP35SI (https://www.accesshardware.com.au/raven-rp35si-automatic-door-bottom-seal-clear-anodised-aluminium) 2 x RP78SI Long (https://www.accesshardware.com.au/raven-rp78si-perimeter-seal-clear-anodised-aluminium) 2 x Custom 38mm Acoustic Insulated MDF Door (1 x 820w, 1 x 720w) (https://www.archskirt.com.au/doors-&-hardware/timber-doors/acoustic-doors.php?gad_source=1&gad_campaignid=20956936303&gbraid=0AAAAAD3nY1yU9VESYeX5ngrxX1ilnmlsj&gclid=EAIaIQobChMI55mUiZCZkgMV76NmAh0bXwwfEAAYAiAAEgKCcfD_BwE) I require a carpenter to install only, not purchase any hardware (except appropriate hinges). The $600 payment advertised is for labour only.

Quotation : Roof leak is caused by poor/defective installation of transition flashings. The flashing has insufficient fall (should be minimum 3 degrees away from the property but slopes toward the wall), causing ponding water and water ingress. Lap joints are poorly sealed and previous patch repairs have failed. Rectification required: remove and reinstall flashings, correct falls, and reseal to make watertight. Budget is $5000 , this task for quotation only

Looking for Peugeot 307 Service – Tyre Swap, Electrical Check & Full Clean Hi all, I’m looking for someone to help with my Peugeot 307. I need: • Tyre swapped to the spare • Mini service (fluids, general maintenance) • Electrical check, specifically for a back tail light that’s out • Detailed clean, inside and out • stapling my roof lining back up ( I have staple gun) If you offer this kind of service or know someone reliable, please get in touch with pricing and availability. Thanks!

Hi there, I'm looking for a roofer to replace a section of rusted and leaking concealed gutter that is around 6m. And the gutter on the other side of the roof also has some rust — it is not leaking at the moment, but it may need treatment to prevent future problems. And there is also a downpipe with a hole in it needed to be replaced or patched. pleased contact me if you are experienced with roofing work and can providr a quote, thanks.

Need a gutter cleaning in double storey house

Internal sunroof cover came out from one side