Find an experienced local plumber in London

Looking for someone with plumbing experience to replace the existing taps in my bathroom. I have already bought the new GoodHome taps, so this is installation only. Work required: Remove the 2 existing separate basin taps Install the 2 new GoodHome Calp basin taps Remove the existing bath/shower mixer tap Install the new GoodHome Annagh bath/shower mixer, including shower hose/head Connect everything to the existing plumbing Check both installations for leaks and make sure hot/cold water is working correctly Leave the area tidy afterwards All replacement taps are already here and ready to install. Please bring the necessary plumbing tools and any small fittings/seals that may be required

Install a new double shower bath mixer tape. Also check out waste drainage from hand basin and from bath tub and possibly change the waste pipes to both as there is a blockage.

Replace existing Bristan 1901 bath shower mixer taps with B&Q copy. Should be same dimensions etc… straight swap

I have a mixer tap that is heavily dripping (driven by the hot tap I think) - it has not turned off for a while unless you partially turned it back on a small way ( if you turn it off fully there is a steady flow of water), now it is dripping even when you turn it back on a small way. The tap is also a bit loose/wobbly on the sink but I think that is a separate issue - ideally this would be fixed too!

Replacing a 100cm stainless steel kitchen sink with a composite one. Might need to enlarge the worktop, but unlikely. If it necessary then I can pay more on the job.

Kitchen mixer tap is leaking from the base of the spout when either the hot or cold tap is turned on. The more the tap is opened, the more water spurts out. I would like someone to diagnose and repair it.

I’ve got two mixer taps with a slow drip that I’d like sorted properly. Both are single-spout mixers but they’re different types. The kitchen tap is a dual-handle mixer with separate hot and cold handles feeding one spout, likely needing worn washers or ceramic valves replaced. The bathroom tap is a single-lever mixer, likely a worn cartridge. Nothing major, but I’ll leave the diagnosis to you. Looking for someone experienced with tap repairs who can bring the usual tools and common replacement parts. Please let me know your availability and quote. Happy to send photos of both taps if that helps you assess before the visit.

Shower mixer tap is broken and needs repairing or replacing

Bathroom basin and full pedestal and Single mixer tap installation.

I want to buy a shower mixer tap for my bathroom. It’s an old house so it only has individual taps in the bathroom

To replace the shower head with a new one.

Kitchen mixer tap needs replacing. I have already purchased the new tap to be installed (like for like swap). Under sink access is clear, and working isolation valves are present. Please note- If you cannot make Sat 29th Aug, I am flexible.

diverter knob on the bath/shower mixer tap is missing

I need a qualified plumber to replace a kitchen mixer tap.

Job Overview: Remove two separate bath taps, install a new deck-mounted bath shower mixer tap (GoodHome Cavally), and mount the shower head bracket. Scope of Work: Remove and later reinstall the bath panel to access plumbing underneath. Turn off / isolate the hot and cold water supply to the bathtub. Disconnect and remove the two existing taps. Fit the new bath shower mixer tap onto the existing 180mm tap holes. Drill and screw-mount the shower head wall bracket into the tiled wall above the bath. Reconnect pipes, restore water flow, test for leaks, and reinstall the bath panel securely. Materials & Requirements: All tap hardware, hose, handset, and wall bracket are provided. Please bring standard plumbing tools, basin wrench, and consumables (PTFE tape, silicone if needed).

Change mixer taps on the bath and add a shower curtail rail into tiles

I have started it but cannot disconnect the existing flexi hoses from the mains with the two spanners I have. Likely take you 5 mins with right tools and strength!

Bath decked thermostatic mixer tap and shower only bring out very hot water so not mixing to desired temperature

Bathroom Refresh: I am looking for an experienced plumber to replace bathroom brassware fittings in a first-floor, 2-bedroom 1970’s flat. (Thermostatic shower, bath taps, & basin mixer tap). Scope of work: 1. Remove existing faulty thermostatic shower and install a new Mira thermostatic shower kit. 2. Replace existing bath taps and shower hose with new Nuie fittings. 3. Replace basin mixer tap and basin waste with a new Nuie mixer tap and matching waste. Property details: • Combi-boiler, Vaillant. • The mains water supply can be isolated externally via the flat’s dedicated street stopcock. • All the new fittings described above have been purchased and are ready to be installed. Please provide: • A fixed-price quotation. • Confirmation that you are experienced with thermostatic shower installations. • Details of any guarantee provided on your workmanship. I look forward to receiving your quotation. Thanks

Replace my broken bath shower mixer tap with showerhead rail with a new bath shower mixer tap and a new showerhead rail.

We have evidence of a possible water leak from the bathroom. After longer showers, water is leaking into the adjacent kitchen, and there is a brown water stain on the bathroom wall. There is also mould in the bathroom, kitchen and bedroom. We need the source of the water ingress investigated urgently, as we’re concerned that moisture may be getting into the building fabric.

Looking for an experienced Gas Safe registered heating engineer/plumber to come to my flat in Kennington/Oval on Wednesday 30 September to look at two issues: 1. Baxi boiler / central heating system * Baxi Megaflo 24 System ErP, installed around 2016/17 when the flat was built. * The boiler/system is currently working, but the pressure gradually drops and needs topping up roughly once a week. * I’d like someone to diagnose why it is losing pressure and check for obvious issues such as the expansion vessel, pressure relief valve, filling loop or a leak elsewhere in the system. * The boiler is approaching 10 years old and hasn’t been serviced since I moved in during 2023, so I’d also like a proper boiler service/check while you’re here. * I’m particularly keen to make sure the system is reliable before winter and before I rent the flat out while travelling. 2. Leaking shower temperature control The thermostatic temperature dial on one of the showers is leaking around the control/faceplate area (photos attached). I’d like this investigated and, if it’s a straightforward cartridge/seal/washer issue, repaired at the same visit. Please only offer if you are Gas Safe registered and comfortable diagnosing both boiler/heating-system pressure issues and shower plumbing. I’m looking to spend around £150 for the visit/service and straightforward repairs. I have an Airtasker voucher worth £200, but this needs to cover the total including Airtasker fees, so please bear that in mind when making an offer. If replacement parts or more substantial work are required, I’m happy for you to diagnose the issue and quote me before doing anything additional. Timing is important: the voucher expires at the end of September, so I specifically need someone who can attend Wednesday 30 September. I can provide additional photos/details beforehand if helpful.

The shower keeps dripping need someone to suggest a solution and fix the shower. Already tried to solve replacing the shower head; the leak didn't get solved. Task has 2 parts, 1. Suggest a solution or new parts in case they are needed, you can inspect the shower in person if required 2. Replace the parts and solve the leak issue Please share if you need any replacement parts that I should order or if you will have them with you. Shower looks like the one in the attached picture (brand: Aqualisa), it is thermostatic. You can suggest or bring the new parts; they don't need to be from Aqualisa, but still be good quality and have a warranty. The person must come with their own set of tools. Free Parking is possible in the driveway. Feel free to send a quote with additional parts or labor only+parts as needed. Screwfix and B&Q are 10 to 15mins drive from the house. Thanks.

Shower leaking faucet. Simple task and straightforward.

Shower repair needed The overhead shower head does not receive water, and water leaks at the valve area. Likely needs diverter valve or mixer replacement. I need a plumber to diagnose and fix the leak and ensure the overhead shower is working properly

Shower mixer bar is leaking - washer may need replacing. Let me know going rates please!

Shower leaking, replacement cartridge arriving today, it needs to be replaced. Seems like some water hammer.

Bathroom tap is dripping - might need new washer or cartridge. Also shower door is leaking so needs a new seal, and if possible out some sealant around skirting underneath once fixed to avoid any more damage. Picture shows the tap that is dripping (right tap)

Shower tray is leaking by corner of shower screen. Need to remove old silicon and replace with new around the whole shower tray. Also need to replace old cracked grouting in a few small areas.

The tap of my shower is leaking and has a constant drip underneath.

Shower leak from shower connection, pipes going through wall needs to be sealed

My shower tub is leaking to the flat ceiling directly beneath my bathroom

Need to change the shower bath tap as water is leaking from rubber of taps

Leaking shower base, toilet lid not closing slowly and broken toilet paper holder

The shower flour is leaking into the floor below and needs repairing

Leaking shower base, toilet lid not closing slowly and broken toilet paper holder

My shower base has corroded and is leaking water. I need this fixed or a new base installed.

Leaking shower. Need shower sealed and tiles

Our shower mixer cartridge is leaking - we need it removed and replaced by a plumber. Pls see photo of the shower mixer and feel free to ask any questions

Shower continually dripping even when in off mode

Plumber needed for built in / concealed cistern. The flush button can be pressed down but the toilet does not flush. I can hear water running inside/behind the toilet and there is a small continuous trickle of water into the toilet bowl, although the water level in the bowl is not rising. The toilet and cistern are built into a tiled wall, but the flush button/plate appears to be removable. 10:30am tomorrow please.

Toilet is blocked. I need a plumber to unblock please.

I need to install 2 water tap inside my warehouse and need to sort a toilet that is leaking under the tile

1.Upstairs toilet not flushing 2. Downstairs kitchen sink plumbing to be fixed

Two bathrooms, back to back, and alongside an outside wall on the second floor of a purpose-built building. The toilets share a waste pipe, waste is flowing from one toilet to another and back again. It seems that there may be a blockage to the outside waste pipe. This job may require going into the cabinet behind the cistern in the main bathroom. (Easy access)

Concealed Geberit toilet cistern leaking slowly into the bowl. After flushing, it refills normally, then starts topping up/hissing again about 5 minutes later. Likely flush valve seal/gasket issue. Access is available through the flush plate, so no tiles need removing. Looking for a plumber experienced with concealed Geberit cisterns to diagnose, repair/replace the faulty seal or valve if needed, and test afterwards. Please quote labour and indicate whether parts are included.

The flush button mechanism for my toilet has come loose behind the wooden panel. The grey flush actuator/mechanism is currently being held in place with cable ties; without them it hangs loose, and when the flush button is pressed the whole mechanism moves instead of staying securely mounted. I’m looking for someone to inspect it and properly secure/remount the mechanism, ideally with a suitable bracket/fixing rather than cable ties, and make sure the flush operates correctly. Access is available behind the toilet and I can provide photos. Ideally looking for someone with experience repairing concealed cistern/toilet flush mechanisms. Please bring any appropriate brackets/fixings that may be required.

Two tasks 1. Remove sealant and reseal around the bath tub 2. Fix toilet seat.

Update - flush has broken on toilet in cistern - it looks like a part has broken off (unclear) and water is filling into the cistern but very slowly; and the flush is moving very slowly.

Toilet cistern overflowed and it looks like flush valve needs replacing

I need a leaking toilet fixed. Images attached. From the images let me know if are able to determine the issue and if you need a new specific part? You can see where I have attach some black tape to temporarily stop the leak. This has not held. If you need to facetime before, let me know.

Toilet blocked. I tried plunge and unblocking products. Drains slowly but still blocked. No waste just toilet water.

Hi, Please I need my toilet seat hinge/fixing repaired. Please see the photos attached. Can you supply the correct hinge/fixing kit and fit it for me? I want supply and labour included, ideally as soon as you’re available.

My toilet is clogged and can’t be unclogged using diy methods. Looking for someone more skilled to fix the issue. Please note i will need you to clean up any mess left after you unclog.

Toilet has been blocked for 3 days. Not aware of any object dropped in toilet. Have tried plunging and unblocker solutions - still blocked.

My toilet bowl is continually adding water as if you’ve just flushed. It’s not over flowing but you can just hear the sound constantly.

Have a blocked toilet and need some help with this please, water is not draining, please don’t ask for pictures is not a pretty situation, need someone asap today or first thing tomorrow morning preferably plumbing background thanks

Flush button has fallen off * need to replace

An object fell into the toilet and it was flushed down mistakenly and has blocked the toilet

The plastic valve cracked on my toilet photo attached