Find a trusted local electrician in Central London

I’m looking for a qualified electrician for several small electrical jobs in my flat. Ideally I’d like to have these completed together, depending on the quote. 1. Convert 3 existing single sockets to flush-mounted double sockets I have the new double socket faceplates already. The existing openings will need to be enlarged/chased out and suitable double back boxes fitted into the wall, so the finished sockets sit flush with the wall like standard sockets. I do not want surface-mounted boxes. 2. Remove 2 hardwired electric radiators and replace the connection points with flush-mounted double sockets There are two electric radiators currently hardwired into fused connection points. I’d like both radiators electrically disconnected and removed, then, where suitable, the existing connection points converted to double sockets. The replacement sockets should also be flush-mounted into the wall, not surface-mounted, including any chasing or enlargement required. I have the double socket faceplates already. I’ve attached a photo showing the existing radiator connection. Please check that the existing circuits are suitable before converting the radiator points to sockets. I will supply all visible socket faceplates. Please include any back boxes, cable and other installation materials required. Please include labour, testing and any required electrical certification in your quote. If possible, please give me: • a total price for completing everything together • a rough breakdown for each part, as I might do some of the work separately depending on the total Free underground parking is available on site.

I need a registered electrician (in the future for certificates - not now) 1 ) I need to change a switch outside the room into the room on the other side of the door. 2) I need to remove the plug from the scarting box into the wall 3) Remove an alarm box and make all the cables safe.

Old job to be removed and new job to be installed

Installation of oven, extraction fan, under cabinet lighting, socket repair

I need an electrician to change the entire light fitting in my bathroom. It’s currently a horrible bright LED feature but I need something warm to replace it.

Supply and Replace 4 downlighters in bedroom - currently one is working, three not working and bulbs have been replaced. And supply and replace 1 downlighter in kitchen to match existing one - bulb has been replaced and still not working.

Smoke alarm battery replaced and need a ladder Please

need to have my new electric cooker installed, locally only please as this would be a quick job. there is no recycling old cookers. just a simple installation of this electric cooker. your travel costs is not covered so its ideal for somebody who is local - this is what i have: https://www.currys.co.uk/products/beko-pro-aeroperfect-airfry-fdca6732cm-60-cm-electric-ceramic-cooker-silver-10287516.html?srcid=198&cmpid=ppc~gg~0102+(Shopping+Ads)+MDA+-+Cooking+Free+Standing+-+Generic+All+-+PMAX~~Exact~21823835212~&mctag=gg_goog_7904&kwid=GOOGLE&device=c&ds_kids=&tgtid=0102+(Shopping+Ads)+MDA+-+Cooking+Free+Standing+-+Generic+All+-+PMAX&gclsrc=aw.ds&&gad_source=1&gad_campaignid=21813533499&gbraid=0AAAAAD7JKSKR6mSc8is2OMRSsV8LoIcwc&gclid=EAIaIQobChMIrrm7ra3ulgMVKotQBh0u3ADEEAQYBSABEgIHJ_D_BwE

Install electrical oven , I believe it needs to be wired in.

to attend a property and inspect/fix a bedroom light switch. Issue: The bedroom light switch is not turning the light off. The light remains on, so the switch and wiring need to be checked and repaired.

We need an electrician to reinstall a Zanussi induction hob.

We need someone to disconnect an electric and gas cooker to connect another electric and gas cooker

To change over 5 existing light sockets to new 5 light sockets.

The bathroom fan comes on with the light but switches off again after about 2 seconds. I have removed fluff from it but it did not fix the problem. It is a ceiling mounted Vent-Axia fan.

Fuse box switch caused a minor power cut in my flat. I flipped the switch back on and everything works fine, except my electric oven. The stove works and the oven comes on but its not heating up at all. I tried to reset the timer like what I read online but no changes Brand: Montpellier Model: MDOC60FS

Aircon isn’t working and I assume the filter just needs cleaning. I have a ladder but feel free to provide your own tools

I need my new cooker hood installed in the kitchen

Need a fan put up light heavy motor part assembled in bedroom

Please keep all communication through the app messenger, thanks. I need an electrician to repair the cooker and to fix a Single Bed with Headboard & Storage Drawers. Electric cooker-https://www.very.co.uk/swan-sx16710b-50cm-electric-solid-plate-cooker-black/1601210766.prd?variantId=WQG1P&cm_mmc=google-_-BAU+-+Generic-_-All-_-PRODUCT_GROUP_2358978390467_[*AdID*]&utm_campaign=Generic_Electricals+-+Shopping+-+Appliances+-+MDA&utm_medium=cpc&utm_source=google&utm_term=PRODUCT_GROUP&campaigntype=generic&category=Electricals&gclsrc=aw.ds&gad_source=1&gad_campaignid=21519324959&gbraid=0AAAAAD2k1i2neBBQSq5iKYn4X6im_zhXU

You must be a plumber or a heating engineer. Boiler diagnosis completed as follows below and need someone to replace both parts. Parts to be ordered separately and not included in price here. - system pressure was low. I topped up the pressure and reset the boiler; however, the boiler still failed to fire. The appliance was displaying the fault code shown in the photographs provided. I referred to the manufacturer's instructions, which identify this fault as relating to the gas valve. I then contacted the manufacturer directly to confirm, and they advised that the fault is associated with the gas valve and ignition electrodes, with replacement of these components being the recommended course of action. The active fault codes displayed on the front of the boiler provide a clear indication of the fault condition being detected by the appliance, and the manufacturer has confirmed that these codes relate to the gas valve and ignition electrodes.