Find local smoke alarm installers in Central London

Reattach cupboard door to built in freezer and replace kitchen smoke alarm. You will need to buy a new smoke detector and may need to buy some other stuff to achieve this. I will reimburse for these items

Hi I am looking for a trader who can install one heat alarm detector in the kitchen by taking surface-mounted trunking from the existing hallway main powered smoke alarm, so that it provides permanent live then fit heat detector which connects by the existed main powered Aico smoke alarm then activate if heat went off and send a signal to existing Aico smoke alarms in the property I would be grateful if you could install and supplying to the Aico heat alarm detector that compatible existing smoke alarms. Many thanks

Need to change battery on smoke alarm.

BS 5839-6 Smoke alarm inspection/test & certificate – HMO I manage a standard two-storey terraced HMO in Haringey and require inspection/testing and certification of the existing smoke alarm system. The system was recently installed by a qualified electrician and consists of 4 mains-powered interlinked alarms: • 1 × heat alarm – kitchen • 1 × smoke alarm – lounge • 1 × smoke alarm – ground-floor hallway • 1 × smoke alarm – first-floor hallway/landing We do NOT require a Fire Risk Assessment, EICR, emergency-lighting inspection or general fire-safety inspection. Please confirm with your offer: 1. That you can issue the appropriate BS 5839-6 certificate. 2. Your relevant qualifications/accreditation. 3. Your total price including the certificate and any fees/VAT. The system is newly installed and functioning, so no installation work is currently required.

Smoke alarm battery replaced and need a ladder Please

Mains wired smoke alarm requires replacement. Looking for a qualified electrician. New smoke alarm will be on site. Not an exact match for exisiting so new holes might be required. The ne product is the Aico Ei3016.

Simple task The 3 old smoke alarms wired in are going off intermittently I suspect low battery I just need a ladder ( for the second floor no lift )and someone to do this as I cannot reach them the ceiling is too high. They do not have to be removed. just stopped.

1. Install 2 replacement smoke alarms and 1 replacement carbon monoxide alarm. Both are at the flat ready to be installed. 2. Remove a broken mirror from the back of a wardrobe door and install a replacement. 3. Tenant says windows aren't closing properly. I want someone to have a look and see if there is an easy fix / assess the issue and report back to me with photos so I can see what the issue is.

Smoke alarm battery needs replacing Alarm is about 3-4M high on a staircase landing - suitable ladder needed

Supply and fit a smoke alarm in the hallway on the 2nd floor - battery operated. Re-seal around a bath where there are little gaps in the sealant.

These 3 smoke alarms have been detached from their position. I want that re-fitted and want to make sure that they are working. Also, there is a small leak in the kitchen sink tap. Needs to be investigated and fixed.

Don't have the nec ladder to reach the beeping smoke alarm. You'd need a ladder, not a step ladder. Not sure what battery it needs but can research that.

Replace existing ac mains smoke alarm

i can’t get the alarm to stop beeping, i’ve tried to fix it but i can’t and i need to stop, i’ve tried with the screwdriver but i just broke the alarm

Change smoke alarm battery

Smoke alarm on high ceiling needs battery replaced. Needs tall ladder

I need 4 mains-wired, interlinked optical smoke alarms replaced on a like-for-like basis. All 4 were installed on the same day, approximately 10years ago. 2 of the 4 are now beeping (3 beeps every 4 hours), which I understand indicates end-of-life on these units. The other 2 haven’t started beeping yet but are the same age, so I’d like all 4 replaced together in one visit. What’s needed: • Safely isolate power, remove the 4 existing units, and dispose of them properly • Supply and install 4 new mains-powered, interlinked optical smoke alarms in the same locations • Test all units individually and confirm the interlink function works across all 4 • Must be a qualified/registered electrician (e.g. NICEIC or equivalent) as this is mains electrical work

Emptying the bath last night tripped the electrics. The mains-powered smoke alarm would not switch off. There is not a separate fuse for the smoke alarm. We need to isolate the smoke alarm to prevent electric fire. Will also need a plumber to check for leaks.

1. To replace 3 mains driven smoke alarms (which I've already purchased) 2. To re-fix an indoor door handle (that came loose during some recent works 3. To open a motion sensored outdoor light fitting to check exactly which sort of bulb would be required to replace it (or ideally pop around the corner to the Weir Rd industrial estate, get the right light bulb and replace it)

Hi, I need a registered electrician to inspect, test, and sign off on two recent installations for Building Control compliance. ​The items to be certified are: ​A newly installed bathroom extractor fan ​Interlinked, mains-powered smoke/heat alarms. ​The work is already physically done, but I need a qualified professional who can test the installations, issue the Minor Electrical Installation Works Certificates. Thank you!