Find a sockets and switches installation professional in Central London

I need replacement of three sockets which have either become or are becoming stuck

Electrician needed – relocate sockets/switches and reroute hanging cables Looking for an electrician for my flat in Hackney. A wall has been removed, leaving the cables for its switches and sockets hanging from the ceiling. I need these safely rerouted and secured, with the switches and sockets fitted in new locations and the completed work tested.

3x Shelly 1pm for towel rails 1x Doorbell Transformer 1x Smart Doorbell Tapo D235 1x Power socket 9.15-11.45am, 12.45-3.30pm or 5.30pm onwards Old Jamaica Road SE16 https://shellystore.co.uk/product/shelly-1pm-mini-gen4/ https://www.tp-link.com/uk/support/download/tapo-d235/ https://www.amazon.co.uk/dp/B0GQGH8SLK

Qualified electrician required for lighting alterations in a three-storey house. All existing lights/switches are live and working. Hallway/stairwell switches Replace/reconfigure 4 switch plates using Click MiniGrid + Quinetic for a consistent look, retaining wired switching where practical and adding RF only where needed. Final controls: • GF front door: outside light + GF hallway • GF bottom of stairs: GF hallway + 1F landing • 1F landing: GF hallway + 1F landing + 2F landing • 2F landing: 1F landing + 2F landing GF hallway already has 3-point 2-way/intermediate switching. 2F landing light already has 2-way switching. For the 1F landing light, retain the existing wired 1F switch and add 2 Quinetic RF controls at GF bottom of stairs and 2F landing via a QURWM3 hybrid receiver. Proposed switch kit is NOT YET ORDERED. Please confirm compatibility/quantities before I buy. Work includes: • Confirm existing hallway switching so correct 2-way/intermediate modules are fitted • Install 4 matching faceplates/modules • Install/connect QURWM3 receiver and existing wired 1F switch • Pair/test the 2 RF switches and all lighting No new chased switch wiring between floors. Stairwell wall light Replace existing working fitting with supplied Alabaster Stone Diffuser Wall Light. Allow for drilling/new fixings if needed. Ground-floor hallway light Remove existing working track lighting and install supplied Interiors 1900 Fargo 3-Light Large Inverted Pendant. Requires cable routing approx. 3m across ceiling using cable/wire fishing, with a few strategic access holes if needed. Please minimise ceiling damage. Making good/plastering/painting not required. I supply both light fittings and, once confirmed, switch kit. Please supply normal sundries/cable/fixings. Ladder available onsite. Please confirm experience with 2-way/intermediate circuits, Quinetic/Click MiniGrid, and cable fishing.

Two wooden lamps with very old wires/switches and plugs, both need replacing.

I’m looking for a qualified/registered electrician who can also carry out the associated installation work. The jobs are: • Install a new electrical socket/connection on the wall above the hob to accommodate an extractor fan, and then install and connect the extractor fan. • Install a new electrical socket/connection high up on the living-room wall to accommodate a wall-mounted TV. • Install the TV bracket securely onto the living-room wall and mount the TV onto the bracket. The wall is mortar/brick, so the appropriate heavy-duty drill, masonry bits and fixings will be required. Please only apply if you have the suitable equipment and experience for securely mounting a TV onto this type of wall. • Install a 350cm IKEA VIDGA curtain track inside a high-up curtain pelmet. The pelmet is approx. 340cm wide and 312cm high. I have purchased 3 x IKEA VIDGA single track sets. The tracks will need to be measured, cut to the required length, joined together and securely installed inside the pelmet. Once installed, the curtain also needs to be put onto the track. The high-up work will require a suitable tall ladder/platform and appropriate equipment. Please only apply if you are suitably qualified and experienced to carry out the electrical work, including testing/certification as required. Please bring the appropriate tools, equipment, drill/masonry bits and fixings required for the work. Please quote for labour and let me know separately if any additional materials are required. I can provide photos of the walls/locations and the extractor fan and TV details if required.

I’m looking for a qualified electrician for several small electrical jobs in my flat. Ideally I’d like to have these completed together, depending on the quote. 1. Convert 3 existing single sockets to flush-mounted double sockets I have the new double socket faceplates already. The existing openings will need to be enlarged/chased out and suitable double back boxes fitted into the wall, so the finished sockets sit flush with the wall like standard sockets. I do not want surface-mounted boxes. 2. Remove 2 hardwired electric radiators and replace the connection points with flush-mounted double sockets There are two electric radiators currently hardwired into fused connection points. I’d like both radiators electrically disconnected and removed, then, where suitable, the existing connection points converted to double sockets. The replacement sockets should also be flush-mounted into the wall, not surface-mounted, including any chasing or enlargement required. I have the double socket faceplates already. I’ve attached a photo showing the existing radiator connection. Please check that the existing circuits are suitable before converting the radiator points to sockets. I will supply all visible socket faceplates. Please include any back boxes, cable and other installation materials required. Please include labour, testing and any required electrical certification in your quote. If possible, please give me: • a total price for completing everything together • a rough breakdown for each part, as I might do some of the work separately depending on the total Free underground parking is available on site.

I need 2 surface-mounted double sockets installed inside a storage/utility cupboard. The consumer unit is already located in the cupboard, so I’m looking for the sockets to be connected from there, with the cabling run neatly in surface trunking. The sockets will mainly be used for charging a cordless vacuum etc I’ve attached photos showing the cupboard, consumer unit and available wall space. Please include labour, materials, testing and any required certification in your offer. I will provide the socket plates so this is not a cost you have to factor in. Free underground parking is available on site.

I have an old flat with some areas missing plug sockets and some sockets badly installed (crooked)

I have two plug sockets near the ceiling and I would like these removed and either moved down to a lower level or to extend the existing single plug sockets on the ground to double sockets I’d also like 3 ceiling lights replaced

It is to go to the flat, the tenants will let you in and One of the light switches in the bedroom is not working. Electric problem with the entrance lights : 2 lights out of 3 are not working we tried to change the bulbs with no results...

I have two four way switches, that I would like replaced with dimmers. I have bought front plates that match the size of the current switches.

To change over 5 existing light sockets to new 5 light sockets.

Hi, I am replacing the kitchen and I need to 1. Add two more sockets 2. Put the sockets higher above worktop. 3. Hang a wall light 4. Hang two small ceiling lights from Ikea

I need two new sockets installed one in a small cupboard and one underneath a book shelf

Replace 2x motion sensors that are no longer working and fixing a switch that has stopped working

Install 4x wall lights in the same position as existing lights so additional wires do not need to be run behind the walls. Install 2x double plug sockets, 1 in lounge next to existing power source and 1 in storage room also next to existing power source

I need an electrician to fix two light switches in the loft bedroom.

Replace four double wall sockets (3x kitchen, 1x bedroom). Labour only, new sockets provided.

Replacing 7 double sockets with new switches Replacing two single sockets with new switches Replacing 6 light switches with new ones Changing a single socket to a double in one bedroom Adding two new power outlets to two bedrooms Changing one boiler switch and an oven switch We are happy to purchase the new switches Thanks