Find experienced local tradies in Glebe Point

Hello, I’m after a quote for a full install job. Ideally from one person/team who can handle electrical, plumbing and tiling, rather than juggling multiple trades. The job: Installing a Japanese electric bidet toilet seat (TOTO washlet, or similar) onto a wall-hung toilet with a concealed in-wall cistern Nearest power point is currently up near the top shelf (see photo). Needs relocating closer to the toilet so the bidet can be plugged in safely and within bathroom electrical "zone" rules (AS/NZS3000) Will likely need a few tiles removed to run new wiring down to the toilet, then re-tiled/made good afterwards Also need the water supply connected to the bidet unit (usually taps off the existing toilet supply line) 2 toilets/bathrooms need this done, same setup in both Bidet unit: Haven't purchased yet. I've done my own research but open to your recommendations if you've installed these before and have a preferred model/supplier Happy for you to supply it as part of the quote, or I can purchase separately, whichever works out better Location: Forest Lodge, NSW Looking for someone licensed (electrical + plumbing, or a team that covers both) with experience on concealed cistern / washlet installs. Please comment or DM with: Whether you can do electrical, plumbing AND tiling as one job Rough quote (or hourly rate) for both bathrooms Any bidet model recommendations Availability Thanks! 🙏

I need someone to supply and install aquachek to my internal brick wall. Rough size is 70 sqm. There are 4 rooms + hallway The job will have to include removing cornice and skirting Putting l-bead around door /window frames Apply aquachek Reapply cornice (either supplied by you or I can purchase from bunnings but you will have to pick up)

Looking for an experienced handyman or plasterer to repair a hole in an internal plasterboard (drywall) wall. The job includes: * Removing all damaged plasterboard. * Installing new plasterboard with proper backing/support if required. * Taping and setting the joints. * Sanding the repaired area smooth. * Priming and painting to match the existing wall. * Blending the repair so there are no visible patches, uneven texture, or colour differences. The finished result should be restored to its original condition, with no visible evidence that the wall was previously damaged. Please bring all necessary tools and materials. Photos of the damage are attached.

- 3 pack White colour resurfacing required for walls and floor - Bathroom size is roughly 4m2 - Everything else (Stripping back of old resurfacing enamel, removal of silicone, removal of shower glass panel and application of new silicone and putting back the glass panel will be taken care of.

Need to have my verandah balcony professionally repaired: cleaning off flaking rust, treating the remaining corrosion and applying protective primer and paint. You are to supply all materials, including black paint. Only the top & bottom sections need to be done.

Need a timber frame built for a office partition with gyprocking. New frame required as per "red". And gyprock the new frame and also the existing frame (3.57m), excluding door way

I’m hoping to get a new power point installed in a storage room. There’s not a point directly on the other side of the wall, but somewhat close. I’ve marked some ideas for placement in red. The other room in the photos in the cupboard to the immediate left of the storage room.

Standard 2 door built in wardrobe need to put back uo in new house. A Male here to help. Only need one person

standard 2 sliding door wardrobe. Moved house. Got it all taken down and now need someone to put it up at new house. Glebe location. Asap $100. Each Have 3 to be done. Everything is ready to go just need someone to put it back up

Existing holes around the light point need patching and reinforcing before two new screw fixings can go in. Bracket needs to be solid and level. No electrical work – physical fixing only.

Drill two holes into rendered concrete for a dartboard

New double doors leading into courtyard and new timber awning needs painting

Small render job. Old render removed.

Looking to have a damaged section of gyprock cut out and new gyprock installed inside my bedroom storage cupboard (sorry for my terrible photo! But it is the bottom corner). All materials and tools to be supplied by the AirTasker

Meed a gyprock wall floor to ceiling

Scope of Works Level 3 Structural Installation and Roofing Extension Project Installation of pre-fabricated steel structure Location Level 3 Commercial Terms Fixed price contract capped at fifty thousand dollars No variations or cost overruns will be accepted Required Qualification Builder must hold a valid Class 2 Builders Licence and provide certification at completion Project Overview The steel structure has already been fabricated and is currently stored in the garage. The builder is not responsible for fabrication. The builder is responsible for transport within the building, installation, fixing, roofing extension, drainage, finishing, compliance and handover.

Have an existing Dincel wall that has been coated with Acrylic render. Need to repair the coating on a patch 2m by 2m . Banboo got in behind te rende ran levered off the patch. The rest of the wall is OK.

I need a powerpoint put into a wall for a TV

Hi i have an old Victorian terrace Outdoor area needs a balustrade/fence or some sort of safety barrier as there are approx 1m drop from patio to car space below. Please see photos. After a simple solution, open to options, want it cost effective rather than fancy. Measures approx 2m x 0.7m (measurements in photos) Thank you!

Awning installation Side of house 5 metres x3 meters Alongside with outer door rubber water shield ( to be installed)