Find an experienced handyman in Ngunnawal

Need repair/replacement for this downpipe

I just need my mesh to be replcadd due to one hole in it .....i jusy want the mesh replaced

I need 4 small holes in three walls to be patched up and repaired, along with a possible repair to an architrave on the front door which has snapped in half. Approximately 1200 in length 3x holes from door knobs both approximately 7cm x 7cm 1x slightly larger hole about 10cm X 10cm Painting is not required in this case :)

Mixture of curtains furniture light fixtures removed during remodel

Need to mend a 50cent sized hole in a wall with plaster and painting over. Need to mend a cracked cornice with plaster the size of 2 metres

I have two floating shelves that need to be put up onto a wall. Holes will also need to be drilled into the shelf so it can be atached via the metal rods which is provided.

I have a client that needs 8 pannels of laserlight to be replaced. Length of pannels is approx 1750 and width of each panel is 800. Open to both offers of either you supplying the laserlight or me organising it. Just need someone experienced in this as being up on the roof isn't something I've done. Please explain what your offer entails. Thanks.

Sliding door of wardrobe has come off the rail and the bracket needs reattaching. One of the internal shelves is also loose and needs fixing. - Due date: Flexible

Install timber gate in front side external wall, to span about 130cm from wall to planter. Put in a MDF panel in gap above oven. - Due date: Before Sunday, 4 February 2024

External sliding glass door is difficult to open and close. Does not slide easily. - Due date: Flexible

1 Put a bball ring together. 2 Fix a piano stool bottom (might need staple gun or other) 3 Fix brackets to wall and put together an IKEA laundry frame on my wall - have all shelves and bracket pieces but no fasteners/screws for it. To go on gyprock walk. 4 replace net poles in trampoline and set up tent walls on trampoline 4 small jobs at my home - Due date: Flexible

We have a new ceiling fan that needs to be fitted into position where an exisiting light was installed. All wires are in place. The mount has already been fitted to a beam within the ceiling so it is structurally secure. We need an electrician to complete the install. The fan is operated remotely so no additional wiring is required. - Due date: Before Thursday, 25 January 2024

We want to replace the fence with a rolling door, so we need to make a metal frame for the rolling door. - Due date: Flexible

Plaster hole 43cm x 2m where an old gas heater was removed. The gyprock is 10mm thick. Sand back ready for painting (I will paint) - Due date: Before Friday, 26 January 2024

Toilet cistern flows into toiled when full (ie does not shut off when full) - have tried adjusting the arm of the ballcock. Roof leak from a few years ago (have fixed the cracked roof tile) has caused gyprock to swell, will need the skirt removed to patch. Plus an internal door planed down/rehung so it will close - Due date: Flexible

My trampoline got flipped in the storm the other night and metal has snapped. Ive ordered new parts but it will require being taken down and rebuilt to install the new parts. - Due date: Flexible

The cord to a vacuum has been cut, it was one of those return conditions to get a new one. Hoping it's easy enough to fix this? - Due date: Flexible

Anyone Northside with press for bottom bracket cups and help get brake cables sorted as I forgot how it goes back together after I had painted haha - Due date: Flexible

Replace inlet valve (have already purchased it) - Due date: Before Friday, 17 November 2023

G'day I'm looking for someone that can help construct a pre-fab kit garden shed. It measures 2.45 x 2.8m. The concrete slab is in place and kit has been delivered. Thank you - Due date: Flexible