Get free fixed-price quotes from affordable local handymen in Darling Island (in minutes)

I need
In

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Recent Handyman tasks in Darling Island

avatar-url

I need headphone repair

Pyrmont NSW 2009, Australia
11 Mar 2019
$50

My Bose headphone bluetooth on off switch has just broken.

avatar-url

Need one brick replaced

Sydney, NSW
11 Feb 2019
$120

Need a brick replaced on an apartment bottom level there is a hole there already and I have the replacement brick and mortar also just need a professional to replace it

Pedro did a fantastic job very professional very nice guy

I bought a system to mount Treds recover boards to the wheel carrier on my Land Rover Defender, but the mounting plate doesn't fit the Land Rover stud pattern and the unit isn't big enough to be fitted over a 35 inch spare tyre. Need someone with welding / metal fab skills to come and measure up then build the parts that don't fit. The actual carrier is fine, so I just need a mounting plate cut to fit Land Rover stud pattern, and some tubing welded to it that is long enough to clear the spare tyre and strong enough to carry the carrier and 4 Treds recovery boards.

avatar-url

Handyperson needed

Pyrmont NSW 2009, Australia
29 Nov 2018
$50

Hey there, my name is Nayanee. I need to hire a handyperson to help me in Pyrmont NSW 2009, Australia. What do you need done? Painting What is the type of property? Apartment Which areas of the property need work? Spilled wine on the ceiling, need a small area repainted What would you like the handyperson to work on? painting the wall where the stains are in

Good work, nice & friendly. Would hire him again anytime.
avatar-url

Help organise storage shed, some minor cutting

Pyrmont NSW, Australia
18 Nov 2018
$69

Hi I'll be doing this task alongside you. We need to get 6 long pieces of shadecloth out of storage, cut off 6 plastic pipes with hacksaws. We also need to cut a few pieces of slim 25x25mm aluminium right angle using hacksaws (which I have). Then generally tidying the storage unit. Two hours work all up, no heavy lifting. $69 to include the $9 airtasker fee (15% on $60). Due Monday any time from 9am until 4pm. Must have helpful can-do attitude, thank you. We will be working in a storage area just near the Ian Thorpe Aquatic Centre, and Light Rail stop. There is free parking here if you need it

Julian was cheerful, punctual, helpful and enthusiastic. He asked questions to clarify the task and took care when needed with some of the more delicate tasks. Would happily employ again, thanks
avatar-url

Cut aluminium profiles, tidy storage shed with me

Pyrmont NSW, Australia
16 Nov 2018
$60

Hi I'll be doing this task alongside you, I have two hacksaws. We need to cut a few pieces of slim 25x25mm aluminium right angle using a hacksaw, and also cut 12 pvc pipes using a hacksaw. Then generally tidying the storage unit. Two hours work all up, no heavy lifting. $60 cash. Due tomorrow Saturday any time from 11am until 5pm. Must have helpful can-do attitude, thank you. We will be working in a storage area just near the Ian Thorpe Aquatic Centre, and Light Rail stop. There is free parking here if you need it.

avatar-url

Cut slim aluminium profiles, tidy storage unit

Pyrmont NSW, Australia
12 Nov 2018
$60

Hi I need to cut some slim 25x25mm aluminium right angle using a hacksaw, and also cut 12 pvc pipes using a hacksaw. Then generally tidying the storage unit. I have two hacksaws (I'll be using one). Two hours work all up, $60 cash. Must have helpful can-do attitude, thank you. We will be working in a storage area just near the Ian Thorpe Aquatic Centre off Harris Street, near the Light Rail stop.

avatar-url

Hanging of large mirror

Pyrmont NSW, Australia
4 Nov 2018
$50

Large mirror bout 2m long needs to be hung in loungeroom cement wall

avatar-url

Upholster 6 folding chairs

Pyrmont NSW, Australia
11 Oct 2018
$300

I have 6 metal frame folding chairs with lacquered wooden sears and backs. See attached image. I want them upholstered in red fabric which I can source if necessary.

avatar-url

Hang Wall Mirror

Pyrmont NSW 2009, Australia
8 Oct 2018
$50

I need a 7kg big mirror hanged on the wall professionally. Also another painting to be hanged.

Very good service, would hire them again.

Want someone to fit new hinges (supplied by me) to my Land Rover Defender 90 (three doors and bonnet - total of 8 hinges). Hinges supplied with fittings, instructions and grease - just need someone with time, tools, patience and care to do the job for me. Not sure how long it will take, but I am guessing a few hours (happy to pay an hourly rate of $60 or as agreed).

I need someone to fabricate part of a metal mounting system to enable me to carry recovery boards on the spare wheel carrier of my 4wd. I have already purchased the carrier, but the existing mounting plate does not fit my wheel stud pattern (see photo) and isn't long enough to mount the carrier over 35 inch tyres (see second photo). Needs to be bullet proof as it will be used to carry 4 mud soaked recovery treads over rough tracks.

avatar-url

Fix bed frame brackets, BYO drill

Pyrmont NSW, Australia
28 Dec 2018
$40

Hi I just need someone to fix the 4 brackets on this QS Bed as the screws have come out. You will need to supply the drill I can possibly supply some good quality screws or bolts I will be there to help. Estimate 30 mins. Parking available on site thanks Sue

avatar-url

Hole covered in wall

Sydney, NSW
28 Nov 2018
$150

I have had aircon Installed need some one to cover hole and pipes

avatar-url

Help organise storage shed, some minor cutting

Pyrmont NSW, Australia
17 Nov 2018
$60

Hi I'll be doing this task alongside you. We need to get 6 long pieces of shadecloth out of storage, cut off pvc pipe with hacksaws. We also need to cut a few pieces of slim 25x25mm aluminium right angle using hacksaws (which I have). Then generally tidying the storage unit. Two hours work all up, no heavy lifting. $60 cash. Due today or tomorrow, Saturday or Sunday any time from 9am until 5pm. Must have helpful can-do attitude, thank you. We will be working in a storage area just near the Ian Thorpe Aquatic Centre, and Light Rail stop. There is free parking here if you need it.

avatar-url

Cut aluminiuim profiles, tidy storage shed

Pyrmont NSW, Australia
12 Nov 2018
$60

Hi I'll be doing this task alongside you, I have two hacksaws. We need to cut a few pieces of slim 25x25mm aluminium right angle using a hacksaw, and also cut 12 pvc pipes using a hacksaw. Then generally tidying the storage unit. Two hours work all up, $60 cash. Must start today before 3pm. Must have helpful can-do attitude, thank you. We will be working in a storage area just near the Ian Thorpe Aquatic Centre, and Light Rail stop. There is free parking here if you need it.

avatar-url

Help using hacksaw to cut aluminium, tidy storage

Pyrmont NSW, Australia
12 Nov 2018
$60

Hi I need to cut some slim 25x25mm aluminium right angle using a hacksaw, and also cut 12 pvc pipes using a hacksaw. Then generally tidying the storage unit. Two hours work all up. Must have helpful can-do attitude, thank you. We will be working in a storage area just near the Ian Thorpe Aquatic Centre off Harris Street, near the Light Rail stop.

avatar-url

Rotate display light

Pyrmont NSW 2009, Australia
11 Oct 2018
$100

I would like to rotate this light so it is horizontal. As displayed in the photo's the electrical cords as short and can't be pulled out enough to rotate. The cords could possibly be relocated on the light or extended. All tools and materials must be included in the acceptance fee. We are currently painting the walls so the light will need to be ready with all the appropriate fixtures so after the painting is finished I can screw it back to the wall. Painting getting done so the light will need to be extended, and new holes drilled for installation after painting.

avatar-url

Hang Pull up bar from celling of balcony

Pyrmont NSW 2009, Australia
11 Oct 2018
$80

I would like to hang a pull-up bar from the ceiling of my balcony, the installer will need to provide the necessary bolts/ nuts/tools if I do not have the appropriate ones.

avatar-url

Dismantle pick up and install shower screen

Pyrmont NSW 2009, Australia
27 Sep 2018
$350

1. Pick up shower screen from North Parramatta 2. Dismantle existing shower screen 3. Install semi oval shower screen.

avatar-url

I need headphone repair

Pyrmont NSW 2009, Australia
11 Mar 2019
$50

My Bose headphone bluetooth on off switch has just broken.

Want someone to fit new hinges (supplied by me) to my Land Rover Defender 90 (three doors and bonnet - total of 8 hinges). Hinges supplied with fittings, instructions and grease - just need someone with time, tools, patience and care to do the job for me. Not sure how long it will take, but I am guessing a few hours (happy to pay an hourly rate of $60 or as agreed).

avatar-url

Need one brick replaced

Sydney, NSW
11 Feb 2019
$120

Need a brick replaced on an apartment bottom level there is a hole there already and I have the replacement brick and mortar also just need a professional to replace it

Pedro did a fantastic job very professional very nice guy

I need someone to fabricate part of a metal mounting system to enable me to carry recovery boards on the spare wheel carrier of my 4wd. I have already purchased the carrier, but the existing mounting plate does not fit my wheel stud pattern (see photo) and isn't long enough to mount the carrier over 35 inch tyres (see second photo). Needs to be bullet proof as it will be used to carry 4 mud soaked recovery treads over rough tracks.

I bought a system to mount Treds recover boards to the wheel carrier on my Land Rover Defender, but the mounting plate doesn't fit the Land Rover stud pattern and the unit isn't big enough to be fitted over a 35 inch spare tyre. Need someone with welding / metal fab skills to come and measure up then build the parts that don't fit. The actual carrier is fine, so I just need a mounting plate cut to fit Land Rover stud pattern, and some tubing welded to it that is long enough to clear the spare tyre and strong enough to carry the carrier and 4 Treds recovery boards.

avatar-url

Fix bed frame brackets, BYO drill

Pyrmont NSW, Australia
28 Dec 2018
$40

Hi I just need someone to fix the 4 brackets on this QS Bed as the screws have come out. You will need to supply the drill I can possibly supply some good quality screws or bolts I will be there to help. Estimate 30 mins. Parking available on site thanks Sue

avatar-url

Handyperson needed

Pyrmont NSW 2009, Australia
29 Nov 2018
$50

Hey there, my name is Nayanee. I need to hire a handyperson to help me in Pyrmont NSW 2009, Australia. What do you need done? Painting What is the type of property? Apartment Which areas of the property need work? Spilled wine on the ceiling, need a small area repainted What would you like the handyperson to work on? painting the wall where the stains are in

Good work, nice & friendly. Would hire him again anytime.
avatar-url

Hole covered in wall

Sydney, NSW
28 Nov 2018
$150

I have had aircon Installed need some one to cover hole and pipes

avatar-url

Help organise storage shed, some minor cutting

Pyrmont NSW, Australia
18 Nov 2018
$69

Hi I'll be doing this task alongside you. We need to get 6 long pieces of shadecloth out of storage, cut off 6 plastic pipes with hacksaws. We also need to cut a few pieces of slim 25x25mm aluminium right angle using hacksaws (which I have). Then generally tidying the storage unit. Two hours work all up, no heavy lifting. $69 to include the $9 airtasker fee (15% on $60). Due Monday any time from 9am until 4pm. Must have helpful can-do attitude, thank you. We will be working in a storage area just near the Ian Thorpe Aquatic Centre, and Light Rail stop. There is free parking here if you need it

Julian was cheerful, punctual, helpful and enthusiastic. He asked questions to clarify the task and took care when needed with some of the more delicate tasks. Would happily employ again, thanks
avatar-url

Help organise storage shed, some minor cutting

Pyrmont NSW, Australia
17 Nov 2018
$60

Hi I'll be doing this task alongside you. We need to get 6 long pieces of shadecloth out of storage, cut off pvc pipe with hacksaws. We also need to cut a few pieces of slim 25x25mm aluminium right angle using hacksaws (which I have). Then generally tidying the storage unit. Two hours work all up, no heavy lifting. $60 cash. Due today or tomorrow, Saturday or Sunday any time from 9am until 5pm. Must have helpful can-do attitude, thank you. We will be working in a storage area just near the Ian Thorpe Aquatic Centre, and Light Rail stop. There is free parking here if you need it.

avatar-url

Cut aluminium profiles, tidy storage shed with me

Pyrmont NSW, Australia
16 Nov 2018
$60

Hi I'll be doing this task alongside you, I have two hacksaws. We need to cut a few pieces of slim 25x25mm aluminium right angle using a hacksaw, and also cut 12 pvc pipes using a hacksaw. Then generally tidying the storage unit. Two hours work all up, no heavy lifting. $60 cash. Due tomorrow Saturday any time from 11am until 5pm. Must have helpful can-do attitude, thank you. We will be working in a storage area just near the Ian Thorpe Aquatic Centre, and Light Rail stop. There is free parking here if you need it.

avatar-url

Cut aluminiuim profiles, tidy storage shed

Pyrmont NSW, Australia
12 Nov 2018
$60

Hi I'll be doing this task alongside you, I have two hacksaws. We need to cut a few pieces of slim 25x25mm aluminium right angle using a hacksaw, and also cut 12 pvc pipes using a hacksaw. Then generally tidying the storage unit. Two hours work all up, $60 cash. Must start today before 3pm. Must have helpful can-do attitude, thank you. We will be working in a storage area just near the Ian Thorpe Aquatic Centre, and Light Rail stop. There is free parking here if you need it.

avatar-url

Cut slim aluminium profiles, tidy storage unit

Pyrmont NSW, Australia
12 Nov 2018
$60

Hi I need to cut some slim 25x25mm aluminium right angle using a hacksaw, and also cut 12 pvc pipes using a hacksaw. Then generally tidying the storage unit. I have two hacksaws (I'll be using one). Two hours work all up, $60 cash. Must have helpful can-do attitude, thank you. We will be working in a storage area just near the Ian Thorpe Aquatic Centre off Harris Street, near the Light Rail stop.

avatar-url

Help using hacksaw to cut aluminium, tidy storage

Pyrmont NSW, Australia
12 Nov 2018
$60

Hi I need to cut some slim 25x25mm aluminium right angle using a hacksaw, and also cut 12 pvc pipes using a hacksaw. Then generally tidying the storage unit. Two hours work all up. Must have helpful can-do attitude, thank you. We will be working in a storage area just near the Ian Thorpe Aquatic Centre off Harris Street, near the Light Rail stop.

avatar-url

Hanging of large mirror

Pyrmont NSW, Australia
4 Nov 2018
$50

Large mirror bout 2m long needs to be hung in loungeroom cement wall

avatar-url

Rotate display light

Pyrmont NSW 2009, Australia
11 Oct 2018
$100

I would like to rotate this light so it is horizontal. As displayed in the photo's the electrical cords as short and can't be pulled out enough to rotate. The cords could possibly be relocated on the light or extended. All tools and materials must be included in the acceptance fee. We are currently painting the walls so the light will need to be ready with all the appropriate fixtures so after the painting is finished I can screw it back to the wall. Painting getting done so the light will need to be extended, and new holes drilled for installation after painting.

avatar-url

Upholster 6 folding chairs

Pyrmont NSW, Australia
11 Oct 2018
$300

I have 6 metal frame folding chairs with lacquered wooden sears and backs. See attached image. I want them upholstered in red fabric which I can source if necessary.

avatar-url

Hang Pull up bar from celling of balcony

Pyrmont NSW 2009, Australia
11 Oct 2018
$80

I would like to hang a pull-up bar from the ceiling of my balcony, the installer will need to provide the necessary bolts/ nuts/tools if I do not have the appropriate ones.

avatar-url

Hang Wall Mirror

Pyrmont NSW 2009, Australia
8 Oct 2018
$50

I need a 7kg big mirror hanged on the wall professionally. Also another painting to be hanged.

Very good service, would hire them again.
avatar-url

Dismantle pick up and install shower screen

Pyrmont NSW 2009, Australia
27 Sep 2018
$350

1. Pick up shower screen from North Parramatta 2. Dismantle existing shower screen 3. Install semi oval shower screen.

Reviews for Handyman on Airtasker

Average 5.00
From 35 Reviews.
35
0
0
0
0

How much does Handyman cost?

The average cost of Handyman is between:$60 - $148on Airtasker

Low

60

Average

100

High

148

Become a Tasker

A Tasker is a person who can complete tasks for other people within the Airtasker community

Start earning

We've been independently reviewed by thousands...

4901 reviews

4901 reviews

on Product Review

Handyman Services
Handyman Services
something else…