Find an experienced flooring expert in Elwood

Veneer timber floor. Sanding old white wash off with large orbital sander.

Brick Approx 50sqm Will provide material

I need new skirting boards installed in my 2 bedroom apartment across the bedrooms, hallway and living room

Sanding our outdoor deck - approximately 25sqm

Clean and oil rear decking, 4.2 x 5.1m, in good condition. Just needs good clean (tap v close) and oil. I have cleaner and oil. Not urgent, but in next few weeks good. Prefer job done on a Wednesday or weekend. But can discuss possibly be a weekday. Note, dog in photo not here most of time.

Not sure if this can be fixed but we have some light scratches in our floor which we only JUST had fully sanded back and fixed. Anything that can be done for these scratches that won’t look patchy?

3 deck areas - balcony deck sand and stain - (quite weathered will need full deck sanded will need a few coats) - front door deck slight sand and stain ( patchy areas to sand only) - back larger deck light sand in patches only and stain in good condition won’t need much stain, mainly patches - hammer down nails that have lifted

I’m looking for an experienced flooring or handyman professional to repair a scratch in the floorboards in one bedroom. The room is approximately 4.0 x 3.9 metres, however the damage is fairly localised to one area (see photos). The scratch is moderate in size but not spread across the whole room. Floor appears to be timber or timber-look flooring. I’m hoping for a neat, professional repair that blends in as much as possible with the existing floor. This could involve filling, sanding, colour matching and sealing, or another suitable method based on your experience. Ideally looking for someone who has done similar repairs before. Please let me know what approach you’d recommend and what’s included in your quote. Photos attached for reference. Flexible with timing over the next couple of weeks.

Polishing and sealing a natural stone bench top (top surface only) for a 3m x 1m island kitchen bench.

The green parklet area outside is in need of repair, the floorboard in some places have gone soft. Some other minor repairs can be added and quoted on site

Floor area to be installed is around 100 m². Looking to install European oak but open to suggestions. (e.g. https://victoriandesignerfloors.com.au/european-oak-encore-click-manor-grey.html ) Quote should include all inclusive cost of the hardwood floor, supplies and installation.

Two scratches on my floorboards, need them to be reduced if possible. - Due date: Flexible

Sand and polish floorboards. One bed ground floor apartment. I have a gap in air bnb and would like to have the job done Sunday and Monday. It’s a small place with lounge/kitchen area and 1 bedroom with boards. Bedroom boards are in good condition some patches in lounge and kitchen are more worn

Carpet in bedroom, lounge and dining (approx 50sqm ) including surrounding timber edging with nails and vinyl tiles in kitchen and entrance (approx 6aqm) need to be pulled up and disposed of

Finish the edges of the carpet in a matching grey thread to make it look like a rug. Roughly 2.5m x 1.2m

We have removed a small bedded and need to replace the tongue and grove flooring with some salvaged Vic ash

Sanding , staining and polishing floor 40 square meters

Warping in the wood floor

I need to fix a small hole in the carpet on one of the bedrooms in the apartment but I don’t have any extra pieces of carpet to use

Carpentry work for apartment renovation including: 1. Installing new skirtings boards. Approx 60LM (skirtings provided) 2. Install cased opening for living room entrance (Tassie oak hardwood provided) 3. Install transition pieces for back door, bathroom and powder room. (Trade to supply hardwood Tassie oak) 4. Hang new door and hardware for balcony door (door and hardware provided) 5. Replace hinges and handles on 4 existing internal doors and rehang existing doors (hardware provided) 6. Install new deadlock on front door (lock provided) 7. Cover sliding cavity in kitchen no longer used with piece of MDF (trade to supply) Job to be completed before Thursday 18/07