Find a local Tasker to set up your internet near you

Need to get our internet WiFi speed boosted.

I have a vertical long old Victorian house with very thick double brick walls, i I have two routers one at each end of the house but I need the second router at the end of the house working again need router setup to get good coverage throughout. The entire house I already have meshes Looking for an experienced IT technician to configure both modems, I already have set up WiFi extension/mesh coverage but one end of house not working properly.

Hi, we need someone experienced with internet and Wi-Fi troubleshooting to attend our property in Manunda. The modem/router appears to be powered on and all cables are connected correctly. Devices can connect to the Wi-Fi network, but there is no internet access on any phone, laptop, or other device. The internet indicator on the ZTE modem is showing red, while the power, broadband, 2.4 GHz, and 5 GHz lights are on. We need someone who can: Diagnose the cause of the internet connection issue Check the modem, router, cables, and wall connection Reconfigure or reset the modem if required Confirm whether the issue is with the equipment or the internet service provider Restore the internet connection if possible Location: Manunda, QLD Please bring any tools or equipment required for testing. Kindly provide your availability and quote.

fix current cable set up, ensuring internet and nbn connection operating properly, install new mesh wifi and new printer, make sure streaming services and foxtel operating efficiently and at correct speed for connection. Advise on any other steps necessary to update current set up.

Hi everyone, I'm looking for an electrician or technician who specialises in internet/NBN connection issues. I'm with Optus, and my internet keeps dropping out multiple times throughout the day. I contacted Optus, and they said the modem was faulty, so I replaced it with a brand new one. I also replaced the Ethernet cable between the NBN box and the modem. Unfortunately, the problem is still happening. The NBN box always shows all the lights on, but modem only has the power light on, while the other lights are either off or flashing inconsistently. I'm not sure what's causing the issue anymore. I'm looking for someone who has experience diagnosing and fixing this kind of problem. If you can help or know someone who can, please let me know. Thank you!

Connect Orbi wifi 6e and 2 satellites to the internet

Wifi not reaching an area of house need help fixing it

I need someone to help set up my home internet in Surry Hills. Details: • NBN FTTB connection (DSL) • Provider: Flip • Modem: DS244WTV (already have it) • Needs correct cable connection (DSL vs WAN) and configuration • May require basic troubleshooting to get connection live What I need: • Plug in correct cable to DSL port • Configure modem settings (PPPoE or DHCP as required) • Ensure internet is working on Wi-Fi Prefer someone with networking experience. Flexible on timing but ideally ASAP.

Internet ports are set up in 6 locations of the house. I just need two ports in the house connected with internet so I can run a LAN cable through both ports. One to connect my TV and the other in the rumpus room

The unit had the internet but in the renovation the point was removed. I believe the wire is under the house and it needs to be brought back into the unit with a new point on the wall. Plenty of room under the house.

Check whether existing network cabling can be used and/or improve the effectiveness of a home WiFi network. Set up home working. Connect Surface laptop to docking station and then monitor plus peripherals.

I've recently bought some MoCA adapters to try and get wired internet to one other room. My house has foxtel and some other coax ports all over the house but when I connect the MoCA adapter, they can't find each other (MoCA connection light stays off). I know the adapters are working as they can be connected directly with a coax cable and the light comes on. I believe the problem is to figure out whether the coax cabling/foxtel ports are actually connected throughout the house and how to connect them if they are not. I need someone who may be able to help with solve this issue and get the wiring/internet fixed in the other room. Thank you.

Currently having an issue with internet not connecting. Currently connected to wifi and we checked with nbn and kogan and network is fine. The belong modem always opens on the modem/router login page

Need an experienced IT technician to set up a new office internet and phone system. Tasks: * Install and configure a NetComm NF18MESH router * Connect and test NBN and Wi-Fi * Set up Yealink VoIP phones * Patch and test existing office network outlets * Confirm incoming and outgoing calls work Existing network cabinet and cabling are already installed. Equipment supplied. Location: Dandenong South Timing: ASAP Please include your experience, availability and price.

The parents have moved from TPG to superloop for nbn internet. Our current modem needs some settings changed for it to reconnect to the internet. If the modem is incompatible, we have a new one ready to be used. Once connected, the modem needs to be connected to the home mesh network and other smart devices! Thank you

Purchased a new internet modem / router. I can get it to work. Would like some help please

We use Vodafone wifi, ubiquity switch and have a draytech router Our WiFi is required to run our restaurant so connection is vital. It powers our POS, Internet, Sonos, cameras and customer wifi Currently it’s down and I need someone to attend and get it back up and running. May need suggestions on changing equipment but it’s needs to be secure and constant. Must be someone onsite, would be great if you have spare equipment to test and replace if required. I need someone to attend onsite Tuesdays after 12pm

Simple task: the Ethernet cable port has fallen inside the wall so the Ethernet cable isn't able to be plugged in. Need someone with the right tools to take it out and plug it again.

We need a network cable to run from the back of our router, under the floor to a bedroom. The crawl space is a bit tight and I don’t like being under the floor which is why I am posting this task. The direct distance between the two points in about 10 meters, but I suspect a cable would need to be 15 meters as it cannot go in a direct line between the two point. There are already holes in the floor at each end so it just needs to go in one end and come out the other. Should be quick for someone who is happy being under the floorboards. Thank you

I have just had Telstra put in fibre internet to my house and given me a new modem. I now cane make my internet connect to the extenders so can only receive internet in 1 room of my house. I have taken a photo of the extenders (there is 5 of them), the modem and the the router. If you could help it would be great.