Find experienced local carpenters in East Sydney

Looking for a cabinet maker to build a custom top + bottom cabinet combo See images attached Pls include material cost in quote. Cheers Vince - Due date: Flexible

I need a handyman carpenter/painter who can replace mesh on a total of 16 timber (red cedar) flyscreens of various sizes. In particular: (NOTE: CAN DELIVER & PICKUP SCREENS ANYWHERE IN SYDNEY) 1. Remove existing mesh from each screen by removing timber battens 2. Clean Sand & Paint with SIKKENS CETOL HLSE and FILTER 7 PLUS) 3. Put in new mesh and put back timber battens. 4. Make minor repairs to couple of screens (strengthening corners) and replace/repair timber battens if required. ( (1 batten needs glue) 8 of the screens are pictured. All screens of same construction/condition - Due date: Flexible

Build 2x frames for a daybed to fit a massage mattress and led lighting. Mattress: 190 x 75 x 7.5cm - 10kg Budget Flexible. Quote for materials needed and work. Budget Flexible. Due date: Flexible

convert drawer space to shelf 1070 x 75 only require the top drawer to be converted - Due date: Flexible

Looking for a decent carpenter to work with me on a floor set out that has a lot of brass angle to screw down and some basic formwork to install - Due date: Needs to be done on Monday, 25 September 2023

We need someone to initially come and look at the exising space with the old rangehood, do measurements and determine what new rangehood will fit in the space, then buy the new rangehood for us. After that do the removal of old rangehood and installation of the new one plus any carpentry work required for the installation. The first photo shown the existing rangehood with the cabinet doors opened. The second/third photo shown the measurement of the slide out, which is 83 cm. The fourth/fifth photo shown the measurement of the longest side of the rangehood, which is 86 cm. I believe the slot in the cabinet for the rangehood cannot accommodate anything bigger than 86 cm. The short side of the rangehood is 28cm.

Cut out metal/timber carcass above dishwasher - Due date: Flexible

We have a wooden frame that needs repairing at an event in Darling Quarter, Sydney. You will need to bring screws/drill, hammer and also some spare wooden pieces. About 40cm in length and at least 2 pieces of wood to help stabilise it. - Due date: Needs to be done on Wednesday, 6 September 2023

I need a welder to make frames from L bar in Brass color finish for Mirror. L Bar size: between 1x1 to 3x3 Final Frame Size 180x80 L bar cut and join example is show in photo Final product photo is attached - You will only do frame unless you are happy to complete the product for additional - Due date: Flexible

Lower wooden bench to make into a sitting bench - Due date: Flexible

I want a carpenter to fit a floating shelves and put up a curtain racks/wall painting - Due date: Flexible

Need assistance to help finish set pieces. All materials and briefing supplied on-site. Just need carpentry experience and tools - Due date: Needs to be done on Saturday, 29 July 2023

Need staircase built to 2.5m height - Due date: Needs to be done on Thursday, 27 July 2023

Granny flat ongoing kitchen maker and installer - Due date: Flexible

cabinet might fall apart if not repaired, it contains several files and magazines - Due date: Needs to be done on Wednesday, 12 July 2023

Need a cyclorama built measurements 2.5ft long 2ft high Ideally it will be portable enough and can be kept on a table top This is for product photography purposes - Due date: Flexible

I will buy it from Bunnings and need someone to build it - Due date: Needs to be done on Thursday, 6 July 2023

I have a very small room (1m wide x 1.8m deep) that I’d like to explore converting to a study nook. I’m looking for someone experienced in joinery/carpentry to visit and provide some advice on whether this is viable. This task is just for the advice and initial scoping. I will follow up with a build task based on the advice I receive. Notes: * The room has plasterboard walls on all sides. I’d like advice on whether it’s able to support a floating desk. * I’d like 2 matching shelves installed above the floating desk (see photo). * The room has a door that I’d like to get removed as part of the process, include patching the areas where the door hinges are. * I would need to get an electrician to install a power outlet (separately). Happy to answer any questions to clarify. Thanks! - Due date: Flexible

Cut cavity in wood to allow dishwasher to fit in space. Increase size of hole for water inlet to allow for thicker hose. - Due date: Flexible

Need 3 pieces of raw 18mm MDF supplied and cut to size, deliver to Sans souci 2219 1 x 859mm x 1144mm 1 x 859mm x 610mm 1 x 145mm x 895mm - Due date: Flexible