Find experienced local tradies in Glebe NSW

Render the top of this retaining wall. The face has been done.

I need a plasterer to patch up a few holes in the wall from moving power outlets.

Need to take out the old wood panels and replace them with new ones. Must have their own power tools. Tradie/handyman

Cement render over tiles and walls in small bathroom that is approx 1.5m x 1.5m

Need divide 6 rooms totally. Plasterboard structure basic level(no need sound proof） pink line is the wall needed, no ceiling required. Ceiling high 2.75m, no painting required. Door installation required Please quote and need start ASAP

Gyprocker to base and top coat two walls. 1st wall 4m long x 3.2 high. Wall will have a door in center 2nd wall 2m long x3.2 high Base coat and top coat on site No sanding Must be done on Friday.

Needing a tv bracket mounted to Gyprock wall. 53 inch Tv Please supply swivel bracket And experience in mounting on gyprock wall

to render a 2 suare metre of internal plaster

Gyprock ceiling Location Glebe

Hi there, I want to cover an ugly popcorn ceiling and add downlights in a 25m² studio apartment and like to get a quote. I need to preserve as much of the ceiling height as possible as it's currently only 2.44m. Please let me know what I'm looking at in material cost and labour. Many thanks

Gyprock ceiling has come off roof beams. No water damage. Just drooping. Need it to be cut, partially replaced. Accessible from a manhole and below.

Room 1 - Chimney breast - wall is 6sqm (approx) and is painted brick. Assume 10mm thick application. Room 2 - 2 x walls totaling 10sqm (approx) and are painted brick. Assume 20mm thick application. Window architraves can be removed. I would be happy to top coat the walls, if this is not in your general scope.

I would like to replace a double power point in my kitchen and replace our front outdoor light so that it is no longer connected to the light switch but rather just works on sensor

Scrapped wall, and skirting board disassembling furniture, so would like to have this fixed up so that it looks as good as it was. I'm looking for plastered who can plaster the scrapes on the wall, and the skirting board, and repaint once dry,

There are thirteen holes in a wall and ceiling that have been made by an electrician while changing the wiring. Each hole is c. 50x50mm and there is one trench c. 30mm wide by 3 metres long. The smaller holes will need some sort of support backing to hold the new plaster.

Need a gyprocker to fix an internal wall roughly 2 meters tall by 2 metres wide

Build a partition wall as shown in blue on the plan. The wall needs to be 2.4 m tall, while the ceiling is more than 3 m high. probably need some anchor point across the existing brick wall, as shown in red, to increase the structural straightening.

Build a sliding door wardrobe. Shelves, drawers and hanging space. 2.4m white wood or veneer.

Need a power point installed. Pretty sure all the wiring is there already. Just need to install switch

Cracked wall corner, metal beneath showing, need plastered.