Find a reliable appliance technician in Melbourne

Needing assistance fixing my oven. The fan forced function has stopped working (top and bottom elements still functional). When turning on this setting it does not heat up and switches off after a few minutes. Model is a Bosch oven HRG6767.2A

Looking to do a cosmetic update to our kitchen by changing the range hood and oven before selling. Looking for someone that can do the measurements and find a suitable replacement at a low price, maybe from Bunnings or similar.

My gas stovetop (Smeg 4 burner) keeps igniting /sparking even though I’m not pressing down the knob. Flames lights if gas is let through. I have switched off of the electrical plug to stop the clicking for now. I was using 2 burners, then tried to turn on a 3rd when the continuous clicking happened.

I need a licensed gas fitter to install a new 60cm 4 burner gas cooktop (Esatto ECG604WS, natural gas, cutout 560 x 490mm, bought from Bunnings). It replaces an existing Electrolux 60cm induction cooktop. - Existing gas supply is capped off in the cabinet under the sink (from a previous gas cooktop). Photo attached. - Remove the induction cooktop and fit the gas cooktop into the existing benchtop cutout. - Connect gas, leak test and commission all burners. - The induction cooktop is hardwired, so it needs to be safely disconnected, and the gas cooktop's electronic ignition needs a 240V power point under the bench. Please confirm if you can do the electrical part or if an electrician is needed. - Provide a Victorian Certificate of Compliance on completion. The cooktop will be on site. Photos attached.

Rheem Electric Hot Water System – Inspection Today (Saturday) – Fitzroy Looking for a qualified hot water technician to inspect an existing Rheem electric storage hot water system today. Water heats intermittently but is often only lukewarm. Need diagnosis of the thermostat, heating element and tempering valve as appropriate. Third-floor apartment, stairs only. Budget: $180 for inspection and diagnosis only. Repairs and parts to be quoted separately. Please confirm your qualifications, availability today and whether your offer includes all call-out and diagnostic costs.

The up and down control buttons on my electric standing office desk have stopped working, particularly the “+” button, which controls the upward movement. We removed the control panel to inspect the issue and identified that the “+” button appears to be faulty. I’m looking for someone who can diagnose and repair the faulty button or replace the control panel if required, and ensure the desk is fully assembled and working properly afterwards. Requirements: • Diagnose and fix the faulty “+” button. • Replace the control panel if necessary (please advise if parts are required). • Reassemble the desk and ensure the height adjustment function works correctly. Brand : Steelcase Possilio

I was given this old horn and the mouthpiece broke off in a move. It looks like it might have fallen off before and been soldered back on. It also has a thread on one side with no corresponding thread on the other. Ideally I'm looking for someone to fix the mouthpiece back on more permanently/solidly, so presumably someone with proper machinist's tools.

Lifting my new dryer and placing it on top my washing machine in the laundry cupboard. The dryer is quite heavy and would likely require two people. The job would only take a couple of minutes.

Hi! I’ve just moved house and taken my old washing machine with me. It’s started to jump around like crazy in the last 10 mins of the wash - not sure why (everything appears level), and that’s why I need your help!

We’ve recently moved apartments and have unfortunately had some difficulty connecting our washing machine to the water tap. We’ve been advised that seal tape is required and have purchased this from Bunnings (please see attached photo). The cold water tap is now connected, but there appears to be a leak, so we’d appreciate some assistance resolving this. We also need help hanging three medium-sized picture frames on the wall. Thanks in advance for your help!

Bosch Dishwasher Model sms68m38u Water is flowing is and heating however not washing dishes properly have checked no blockage of spray arms etc possibly not heating water sufficiently to clean- needs inspection to troubleshoot issue

New freestanding oven needs to be hardwired

We’re looking for someone to supply and install a small white panel above our dishwasher to match the existing kitchen cabinetry, as well as someone to carefully remove a circular sign from the outside brick wall of our office building. Photo attached showing the sign. There is currently a gap above the dishwasher underneath the benchtop which needs to be filled with a white panel. Panel dimensions: - 45cm length - 6cm width - 1.5cm thickness The panel needs to be white and as close a match as possible to the existing cupboard doors. Photos attached showing the area and existing cabinetry. We're looking for someone who can: - Supply/cut the panel to the required size - Match the existing white cabinetry as closely as possible - Install it neatly and securely above the dishwasher - Ensure it sits flush and looks like part of the existing kitchen - Carefully remove the sign from the external brick wall - Remove any fixings/adhesive that can be safely removed - Leave the brickwork as neat and tidy as possible - We will take the sign afterwards We're looking for someone experienced with cabinetry/handyman work who can make it look neat and professional, and someone experienced with handyman/sign removal work who can assess the fixing and remove it without damaging the surrounding brickwork. Thanks! 😊

Dishwasher is displaying error E15 and may need pump or base tray cleaned again. Can anyone help. Amendment: web says Bosch error 15 might be water has leaked into the bottom base pan and triggered the anti-flood float switch.

Looking to have someone come to my home and fix my Breville Oracle Touch as I can't transfer my machine Has the ER05 issue so believe may need milk sensor fixed Can purchase parts separately

I have a new rangehood I need to install, and I need someone to remove the old one

Fix thermostat in vented dryer Electrolux 6.0kg vented tumble dryer EDV605HQWA. Is 5 years old and out of warranty it turns but doesn’t heat. Need someone to come fix it asap.

I think I incorrectly installed my washing machine drain hose as it is not draining. Need help reinstalling

Fan rattling - require a fix. Fisher & Paykel 451L Upright Fridge [Refurbished]