Find a reliable appliance technician in Melbourne

Need someone to reattach dryer belt as dryer has stopped spinning on Electrolux EDV6051

Remove all ducting to 8 decommissioned floor vents underneath house. Access is tight (approx 200mm at lowest point, approx 400mm at highest point), so need to be comfortable moving in tight spaces. All floor vents have been disconnected. Must take before and after photos. No disposal needed. No electrical work or plumbing needed. Only access is via gap where old gas unit was located per photo. Tasker to supply all equipment and materials. Location of disconnected ducts marked in red on house floorplan

I have a front loader washing machine on an uneven tiled floor which means the washing machine is unbalanced so it keeps stopping mid cycle. I need the feet to be adjusted or an even platform to be built

Beko dryer stopped after running 1min, water tank and dust filter have both been cleaned. Need fix

My fridge has stopped cooling and was hoping someone could fix it. It's a sharp but I don't know much about the model.

The draining hose connected with the washing machine is leaking

We have had a go at cleaning the BBQ but it needs more work. Also some of the burners are disconnected and need putting back together. Its an integrated Beef Series BSH1585. We have the instruction book

I have Anvil Aire Gdj1260 display fridge the glass door from inside has been broken ... outside glass is fine so need someone to replace either.. whole glass or just inside .. please quote me supply and install

Dryer making loud rumbling noise – likely drum rollers – repair needed Description: My clothes dryer has started making a loud rhythmic rumbling/thumping noise while running. The noise is consistent with the drum rotation. Based on initial checks, it’s likely worn drum rollers or a similar mechanical issue. Looking for someone experienced with appliance repairs to: - Inspect and diagnose - Supply and replace faulty parts (likely rollers/bearings) - Get the unit running quietly again Details: - Location: Port Melbourne - Dryer is otherwise working fine (heating and spinning OK) - Flexible with timing but prefer ASAP Looking for someone reliable who knows what they’re doing – not a trial-and-error job. Thanks

I’m looking for someone to clean and restore a set of hand tools and a toolbox that have been exposed to rain and some liquid spills. The tools have developed surface rust and general grime, and the toolbox itself needs a thorough clean inside and out. I’m hoping to have the rust removed, tools cleaned up, and ideally treated or protected to help prevent further corrosion. This would likely suit someone with experience in: Tool restoration Rust removal Metal cleaning or detailing The tools are mainly standard hand tools (e.g. screwdrivers and plyers), not large machinery. Happy to either: Drop off locally (inner northern suburbs), or Have the work done at my place if mobile Thanks!

I have a Simpson 6kg dryer (model 39S500M-V1) that turns on and makes normal motor noise, but the drum is not spinning. The dryer powers on normally, makes usual running sound, but the drum does not rotate. May have heard a “thud” before it stopped working but I can't be sure it came from the dryer. Drum can be turned by hand but feels slightly stiff. From what I understand, this is likely a drive belt issue (snapped or slipped) or possibly a roller issue. Looking for someone to diagnose the issue, replace/refit belt or repair as needed, provide/bring parts if required. Experienced in dryer repairs preferred in case it's a different issue.

Hello, looking for an experienced appliance technician to fix my Fisher & Paykel dishwasher. Issue: • Dishwasher stops shortly after commencing and shows an A6 error code •Makes a loud revving/humming noise immediately on start • Water not draining properly What I need: • Diagnose the issue (I suspect drain pump-related); • Fix if straightforward; and •If parts are required, please provide a quote before proceeding Details: • Location: Alphington (3-mins from Eastern Fwy) • Flexible with timing (ideally this weekend) • Easy access to dishwasher and sink area Please include: • Your experience with Fisher & Paykel dishwashers; • Availability; and • Any call-out fees or additional costs. Thanks!

Washing machine isn’t draining, it is an lg front loader

Washing Machine drain is not working. I have drain it manually 3 times and it is still showing error code after each cycle.

My Beko Washer/Dryer BWD7541W is no longer drying clothes. Washing is working fine. It seems to do a bit of a drying and then give up. I suspect the internals might be full of lint and need someone to take a look and clean it out/diagnose further if that's not the issue.

Hello, my rubber seal has detached from my Electrolux washing machine rim. I need someone to put it back into place or if broken order a replacement. My dryer switch is also broken — I have a replacement switch but I need someone to take the top off the dryer and pop it in place. I am free today and tomorrow.

Hello aurtaskers My Bosch Serie 6 washing machine has something jammed inside its filter. The filter plug has also snapped off and need to be replaced/removed. I’ve attached illustrative photos of the washing machine and filter plug. I’ve ordered a replacement filter plug for installation once the old one is removed. Thank you!

Samsung front loader (BubbleWash 7.5kg washer/dryer) Door rubber seal/gasket has a hole and needs replacing Please supply correct part and install Located in Prahran Photos attached Model: WD75J5410AW/SA

My LG washer dryer isn’t draining. Have checked online and done some tests and drain pump needs replacing. Model is WD1402CRD6 Miele integrated dishwasher had a glass break and since then, each time it drains it makes a funny noise. Drain hose needs a clear out.

Bosch Washing Machine - Appliance has stopped draining / believe there is fabric stuck somewhere. Have had a plumber here to check drain itself and assist with diagnosing any filter issues. Fills with water and almost completes a cycle but then starts beeping with E-36. Some water remains in the machine. It’s under warranty so if you’re unable to fix, getting the product number from the front door will suffice.