Find trusted curtains & blinds installation experts near you

9 windows need curtains installed. We have the brackets and curtains but we keep doing it wrong

Curtain track installation

I need one set of curtain rods installed

4 windows to be done, curtains and railings provided, need to bring your own tools to complete job.

I’m looking for an experienced curtain installer/handyperson to install two ceiling-mounted curtain tracks and hang curtains across a living-room window. Details: • Wall-to-wall width: approximately 3.25 m • Available recess depth between the existing roller blind and the front edge: 20 cm • Two tracks required: one for a full-height blockout curtain and one for a sheer curtain • The existing roller blinds will remain in place • Tracks should be approximately 3.24 m long and trimmed to fit on site • I would like the sheer curtain to use an S-fold/wave system • The installation is in a rental apartment, so it must be neat and use the minimum number of secure ceiling fixings • The ceiling substrate is currently unknown and must be checked before drilling Please bring the appropriate tools, ceiling anchors/fixings and a detector to check for electrical services or other obstructions. The tracks must be securely installed and suitable for the combined weight of floor-length curtains. I haven’t purchased the tracks or curtains yet. Please advise whether you can supply suitable white aluminium tracks and all required components, or let me know exactly what I should purchase before installation. Please include in your offer: • Your experience installing ceiling-mounted curtain tracks • Whether your quote is labour only or includes the tracks and hardware • Examples/photos of similar work, if available • Whether you can patch the small fixing holes later when the tenancy ends

Need someone with a ladder to help hang 2 x curtains, window is 3.5m track & Curtains ready to go. 30 min job. Parking provided :) 3pm

Experienced Curtain Installer Needed – Brookvale NSW Looking for an experienced curtain installer to replace existing bedroom curtains in an apartment in Brookvale, NSW 2100. Job details: Remove existing custom-made double pinch pleat curtains. Install new Spotlight Gummerson Neutrals Blockout Pencil Pleat Curtains (Chalk colour). The existing ceiling-mounted curtain track is to remain in place. Spotlight has confirmed that the existing track is compatible with the new pencil pleat curtains. Gather the new curtains by pulling the heading strings to the correct width (Spotlight advises each curtain should be gathered to half the track width plus 5 cm). Insert curtain hooks approximately every 8–10 cm along the heading tape. Hang the curtains, adjust the pleats and ensure they open, close and hang correctly. Important information: The previous curtains were custom-made double pinch pleat curtains, and the replacements are ready-made pencil pleat curtains. A handyman previously attended but was unable to install them. Spotlight has since advised that the new curtains should fit the existing track with the correct gathering and hooks. I am therefore looking for someone experienced specifically in curtain installation, particularly changing from pinch pleat to pencil pleat curtains. The curtains are already at the property, and some hooks have been purchased. Please advise if additional hooks or accessories are required. Please only respond if you have experience with this type of curtain installation and are confident you can complete the job. Thank you!

I have all the curtain equipments and i have put the fabrics on the rode. Just want someone yo install curtains for 5 windows and 1 normal sized 4 piece sliding door. Just want you to drill holes perfectly aligning.

install curtain rod and hang curtain. I already have the rod and the curtain from Ikea, but I don't have the nails that's suitable for the wall

Hi, I have two short corner windows at the front of my house in my bedroom. The 90cm roller blinds I got don't fit. I was hoping to pay someone to cut and install them. Thanks.

One set of Venetian blinds installed on bathroom window. Easy job however will need to drill through concrete

Looking for help to professionally curtains installation. We have got the curtains rod and curtains as per the bleow photos. Please provide your owns tools and let us know your earliest availability. Thank you.

Put up curtain rods in bedroom and lounge room. Previously already installed bedroom but they fell down - see photo. Photos of each room. Also photo of what I have to install.

Install roof mounted curtain rods and hang sheers in 2 rooms. Install battery remotes in one room. Curtains, rods and all brackets and screws supplied. Curtains are from iseekblinds.com.au. they have full videos of installation on their website. Need someone who is experienced and who will clean up and look after these new Curtains like their own.

Just need curtain brackets drilled/installed for 5 windows (inc bay windows) I have x5 IKEA BEKRAFTA sets. Unfortch the rods are 120 cm min and a couple of the windows might be smaller. So would be a plus if someone can also shorten them! I live in an art deco rental so doesn’t have to be perfect. I think the walls are all solid/brick. But would still appreciate a neat job!

I have made my attempts to install but need someone with the tools and experience. Roller blinds and all components ready, no measuring and cutting required, just simply install. I have not taken down or moved what I have done, just incase a good starting position.

I’m looking for someone experienced with curtain installation to install two Freedom curtain tracks and hang S-fold curtains across a set of four-panel balcony doors. The job involves: - Installing 2 x 180 cm Freedom curtain tracks (3.6 m total) onto a rendered masonry/brick wall - Tracks to be installed approximately 2.8 m from the floor (ceiling height is approx. 3 m) - Fitting the supplied S-fold hooks into the two curtains - Hanging the curtains onto the tracks and making sure the S-folds sit correctly - Ensuring both tracks are level, aligned neatly and securely fixed I already have both tracks, curtains and curtain hooks. You will need to bring your own suitable ladder, drill and tools, including anything required for fixing the tracks securely into the rendered masonry wall. There is currently a roller blind over the doors, which is staying in place. The curtain tracks will be installed above/in front of this. Ideally looking for someone who has experience installing S-fold/wave curtains, particularly Freedom curtain tracks. Location: Subiaco Timing: flexible, but the sooner the better :) Instructions: https://www.freedom.com.au/s-fold-curtain-guide?srsltid=AU7gw4VcXIay2NfLEDHYjXDJu9Ja-zY09nqCr3s3q52DlTGunsQtENRO

Need 2x curtain rods installed into a brick wall. Already have the curtain rods & brackets

Looking for someone experienced with IKEA VIDGA ceiling-mounted curtain tracks to fix a recently installed system that has several installation issues. The tracks are already installed, but need to be adjusted/rectified: * Track joins are misaligned/uneven, which is stopping the curtain gliders from moving smoothly across the joins. Some curtains are already hung, but currently cannot be pulled properly across the full track. * In the main bedroom, the tracks have been installed right up against the side wall, leaving no access to remove the end caps. Because of this, we currently cannot insert the curtain gliders/hang the bedroom curtains. * Tracks may need to be partially removed, repositioned/aligned and securely reinstalled so all joins are smooth and the curtains can travel freely. * Bedroom track needs to be adjusted so there is proper access to the end cap for inserting/removing gliders. * Please also check the overall installation and make sure the tracks are secure, straight and functioning correctly before finishing. The tracks are ceiling mounted and already cut to size. We are looking for someone who is confident working with the IKEA VIDGA system and can rectify the existing installation rather than replace everything unnecessarily. Please bring appropriate tools and fixings. Photos of the current installation attached

Install outdoor roller blind on pergola beam, St Kilda (Fri or Sat) Description: I need an experienced handyman to install a new outdoor roller blind on our rooftop terrace in St Kilda. The blind: Outdoor roller blind with aluminium hood, polyester sunscreen fabric, charcoal grey 3.0 m wide x 2.5 m drop Already on site, still wrapped, with the supplied fixings bag Product page: https://budgetawnings.com.au/outdoor-blinds/78-257-outdoor-roller-blind-with-aluminium-hood-polyester.html The job Mount the blind, hood and brackets to the front side of the front pergola beam, centred between the two posts (see photo, arrows show the mounting points) The beam is painted timber and about 2.5 to 3 m off the deck Make sure the blind is level and rolls up and down smoothly Fit any tie-down or side anchor points if the kit includes them What you'll need to bring A stable ladder suitable for a tiled terrace Drill, driver, level and any extra fixings needed for a timber beam Access Rooftop terrace on an upper floor, reached through the apartment. The blind is light enough for two people to lift, and it's already on the terrace. Plus I can help. When: tomorrow (Friday 2 October) or Saturday 3 October. Please say which day and time suits you. Please include in your offer: Your experience installing outdoor or roller blinds A fixed price for the full install Your available time