Find an experienced flooring expert in Melbourne City CBD

Title: Install 22m² SPC Hybrid Flooring – Melbourne CBD Looking for an experienced flooring installer to install approximately 22m² of click-lock SPC flooring in a simple rectangular living room. Scope of work: * Install 22m² SPC flooring over existing concrete subfloor. * Install approximately 16m of scotia trim along existing skirting boards. * Install 2m transition trim between SPC and existing tiles (same floor level). * Install 1m transition trim between SPC and existing carpet. * Cut and finish all edges neatly. Materials: All SPC flooring and trims will be supplied and delivered to the apartment. Please bring your own tools. Existing carpet removal and floor levelling are not required. Straightforward rectangular room, no complicated layout. Should be a one-person job. Location: Melbourne CBD Budget: $350 (negotiable)

I need hire someone to install 10 Square meters 6.5 hybrid flooring In Watsonia

Professional installation only of approximately 120 SQM of commercial vinyl sheet flooring in Melbourne. Works include standard floor preparation, accurate installation of vinyl sheets, heat-welded or sealed joints where required, and detailed finishing to ensure a neat, durable, and professional result.

Cut and install approx 2 sqm of floorboard for edge of room. Floorboards SUPPLIED. See photos for areas that need to be covered. NO SKIRTING REQUIRED

Vinyl plank and sheet installer needed to assist with upcoming jobs which include floor preparation and installing vinyl. Need someone with experience and day rate will depend on experience. Please advise what you are able to do. Thank you

A concrete based apartment floor needs to layer. Approx. 10sqm. And need proper under lay. Carpets , edge grabbers are ready. Needs aluminium edge to close up this room and the other small room( carpets fixed but not close up the edge . Only serious and honest trades welcome. Please see pic for details.

I have an area of circa 15m2 that needs to have Baltic pine floorboards measured ,cut to size and fitted to timber floor joists. The floor boards are supplied (at the job) Job is in the Melbourne CBD near Vic Mkt There is free on site parking. Looking for a price to complete

I need to lay down floorboards. They are herringbone. Need existing floors removed and disposed of and floor to be levelled. It’s about 66sqm that needs to be layed.

Remove carpet and install floorboard

​Hi, ​I need an experienced professional to remove existing carpet and supply/install Engineered Timber Floorboards for 2 rooms and 4 wardrobes (30 sqm total). ​Scope of Work: ​Carpet Removal: Lift and dispose of existing carpet and underlay. ​Supply and Install: Engineered timber boards, acoustic underlay, and matching scotia. ​Trims: Supply and install metal trims in front of 4 wardrobes and at all doorway transitions. ​Notes: ​Kindly share photos of your previous engineered timber work.

Hi, I have a small office room of 11.2 square meters and looking for quotes to install the provided 8mm Vinyl Planks model Ennika White Sand and floor reducer for the entrance. The skirting boards have been removed and the walls have been re plastered and sanded. The floor is levelled except one small spot close to the entrance door. Would this be a problem? I can also book a car park under the building so no issues in that regards.

Vinyl laying required in small store room. Do not need to provide vinyl (it is already on site) just need the works done. Store room is approximately 6.45x1.3m. Need completed today (can be outside of business hours)

Remove carpet and install floor boards Area-160 m2 16 -stairs

My brother and I have been in the flooring for a few years and can install your flooring or carpet (stock has to be on site)

45 m² hybrid flooring installation. Floorboard supplied. Need to remove the carpet and take the rubbish away.

Supply install hybrid flooring floor plan provided and the area you have outlined, the carpeted zones for replacement are the living area, dining area, and both bedrooms. Kitchen, bathroom, entry, and balcony are excluded. Calculated areas are as follows. Living 3.8 × 2.8 = 10.64 m² Dining 2.1 × 2.8 = 5.88 m² Bedroom 1 2.6 × 2.3 = 5.98 m² Bedroom 2 2.6 × 2.8 = 7.28 m² Subtotal (floor replacement area) 29.78 m² For supply purposes, carpet should always be allowed with a cutting and waste margin. Recommended allowance (10%) 29.78 m² × 1.10 = 32.76 m² Allow 33 m² of flooring for replacement.

Looking for a quote to get hybrid flooring installed with a soundproofing layer. The room is around 22sqm (5.5 x4) It has an existing carpet that would need to be removed. Preferably need someone certified as I have to get this approved by my building. I can supply the floor and soundproofing layer.

Install commercial vinyl stair tread overlays (high-traffic, water-resistant) I’m looking for an experienced flooring installer to supply and install commercial-grade vinyl stair tread overlays on an existing staircase. The stairs are MDF and were previously carpeted. Requirements / scope: • Supply & install commercial-grade vinyl stair treads • Suitable for high traffic and wet mopping • Non-slip finish required • Install matching vinyl stair nosing • Prepare surface by scraping loose fibres and sealing MDF with bonding primer • Secure with appropriate vinyl/MS polymer adhesive Staircase details: • Straight internal staircase (17 steps) I pay for materials separately

Looking to get new laminate flooring installed in 3 rooms (2 beds, 1 living area) in a Melbourne CBD apartment. Floors are currently bare concrete as previous flooring removed after water damage. Approximate sqm size of flooring needed is 34m2.

Hi - We need someone to do the following - 1. Pick up laminate flooring from West Melbourne. 2. Delivery to apartment in Lonsdale St Melbourne. 3. Remove carpet and dispose 4. Prep underfloor if needed - can be an 'extra' on top of the price. 5. Lay 3mm rubber underlay. 6. Lay 12 mm laminate boards in approx 40sqm(2 bedrooms and a living room. needs to be done in late december after Christmas, or early Jan(before 10th).

Professional floor polisher required to rid stain （cat pee), the stain must disappear and restored to original colour of floor，

I’ve had marble flooring scratched and I would like to get them polished

Requiring assistance in polishing living room area Flooring is made of engineered timber, can provide specifications for you to ensure it can be polished. Happy for you to come to inspect prior to works to make sure. Find attached floor plan, only living area to be polished.

Looking for an experienced floor board polishing specialist to sand a small space, remove marks and apply clear stain. Please quote for the full scope of works, so payment is fixed and no hidden extras. Thanks Lounge/dining/kitchen and hall. Boards are an engineered timber. Entire apartment is 100 square so estimate of timber floors is approx 50 squares. Floors only require a light sand, more photos to be provided next week.

Indoor 14.5m2 - Floor sanding and polish Outdoor 1.1m2 - Floor sanding and polish Works to be completed preferably past 3pm (commercial area) The floor is in generally good condition for sanding.

Hoping to get an estimate to do my kitchen floor, maybe 9m2. Should be fairly straight forward An epoxy floor is currently existing.

Concrete needs patch and repair, grind and seal. About 100 - Due date: Before Wednesday, 30 November 2022

25sqm living room area timber floor. There are stains soaked in so it needs sanding + staining + coating. Maybe just half of the area as the rest are covered by sofa and carpet.