Find an experienced flooring expert in Inner South Melbourne

Install vinyl floor planks over exposed concrete slab . Room is approx 8 sqm.

28m2 of existing flooring. Glued down. Needs to be removed & replaced with Hybrid flooring. Single common aerea. Ground floor unit with access via court yard. New flooring Aged Grey Oak from CarpetCall. Code UL1867. New flooring will be provided.

Looking for an expert to install 85sqm of Herringbone floorboards in our 3 bedroom house in Aspendale Gardens

I need someone to install my laminate flooring (bedroom of 11 square meters approximately)

I need a few damaged vinyl floor planks replaced in Caulfield South. I don’t have replacement materials, so I’ll need you to help source matching planks (as close as possible to the existing colour and finish). Scope: • Inspect current flooring • Source matching planks • Remove damaged pieces • Install new planks properly • Clean up after completion Please quote including labour and materials.

I have 25m2 of hybrid parquetry flooring i need installed as well as 10 linear m of skirting.

Flooring project. Need someone to remove the skirting boards, and once the flooring is completed coming back on the 20/05 and re install and re paint the skirting

Engineered Oak Flooring Installation – 170 sq/m We're looking for an experienced flooring installer to lay approximately 170 sq/m of engineered oak floorboards in our home, which is currently undergoing renovation. Scope: Herringbone pattern through main areas with straight plank borders Existing section: install over existing pine floorboards New section: install onto concrete slab Materials (supplied by us): Herringbone boards: 900 x 150 x 15mm Straight boards: 1900 x 190 x 15mm Happy to arrange a site inspection so you can provide an accurate final quote. Please include your experience with herringbone installation and availability when responding.

We had a door removed to install floorboards and due to part of the edging the door hasn’t been reinstalled yet. No idea for quote so happy to offers

Hi, I need help installing self-adhesive vinyl planks (Gerflor Senso) in my unit in Carnegie. Areas: Living room, dining and kitchen,please see attached layout, approx - 35 M2 Looking for someone who has experience with vinyl flooring and can ensure proper surfaces preparation and alignment.

Amended: Lay approx 22 m2 of hybrid floorboards in two rooms. I have the flooring, so the job is just to install it. I need a quality job with no gaps etc.

Lay recycled 12mm laminate flooring in kitchen & laundry on concrete slab. Approx 25m2

Already have boards and materials. Must have flooring experience.

Looking for someone experienced installing hybrid click-lock flooring to help lay floorboards in my living room. Room size: approx. 25 m² combined (narrow hallway & rectangular living room) Details: • Hybrid click-lock boards • Skirting boards will stay on (boards will be installed with expansion gap) • Floor will be cleared and ready • No glue required What I need help with: • Installing boards • Cutting boards where needed around edges • Ensuring boards are straight and properly locked Tools: If you have flooring tools (saw, tapping block, spacers etc.) that would be ideal. Timing: Should take around half to a full day depending on experience. Budget: Open to offers.

75sqm of hybrid interlock flooring installation

I need my kitchen flooring installed. I have just removed my kitchen and wish to put new flooring in. The job would involve removing existing flooring and then playing the new flooring down.

Need to cut in our a small piece of flooring and cut in a new piece around door frame. Airtasker to supply glue

Lay hybrid flooring tiles in a small bedroom. Area is 2.4m x 2.8m plus inside a double wardrobe. It currently has carpet on top of concrete.

Lay floating floor in 3 bedrooms at a supported residential facility approx 50 metres squared Would need the job measured. We will supply flooring etc unless you have good deals you can get on flooring Need to have experience laying floors.

Need to level this concrete to be same height as subfloor ready for carpet patching. It used to be where a fireplace was that’s now been removed.

Theres approx 45m2 of flooring to be sanded and polished to the same colour (as close as possible). All in one room. Furniture will be moved out.

Polish hard wood floor and water based paint 70sqm

I’m looking for an experienced professional to sand and polish timber floors in a small commercial space (hair studio) located in Elsternwick. Details: • Date: Thursday 2nd April (must be available this day) • Location: Elsternwick VIC • Size: Approx. 35m² • Scope: Sanding and polishing existing timber floors • Space: Small studio, easy access Ideally looking for someone who uses dustless sanding equipment and can recommend a suitable finish (matte or satin preferred). Please include: • Your experience • Photos of previous work (if available) • What finish/products you recommend • Your quote and availability Reliable and detail-oriented professionals only. Thanks so much, Eli

Need Sanding and Polishing Wooded Floorboard, the machine will be supplied on hire by me, can pay hourly basis/day basis or project basis. Attached picture if of the machine to be hired for the job. Tradie must use own protective gear (mask and earplug)

I need to get the sanding and polishing of the floor boards on 3 bedroom’s. Please see the dimensions of the rooms in the attached pic.

Need to fix and polish an old flooring.sq area 75sq meters

Parquetry floor needs sanding and polishing. Lounge/dining/kitchen and hallway, about 50m2 in total. Some water damaged areas need repairing (pieces lifted and replaced), probably 2 square metres or so. Will need to source timber to match what is in place, which might be a mix of turpentine, blackbutt and spotted gum or similar. Finish needs to be 2 coats of hard wax (Osmo or similar). House will be vacant for about 2 weeks from March 12th, this is the window of opportunity.

Sand and polish around 40 Sqm fooor

Sand, fill holes, and apply 3 layers of coating to hardwood floorboard. - size: 60 square meters (approx) - property type: single story unit - coating: water based polyurethane - location: living room, kitchen (no need to sand under cabinet, will remove toe kick), hallway, 2 bedroom, 1 closet - note: kitchen floor boards have many nail holes so require mixing sand dust with PVA glue and fill the holes in

Sand & polish existing timber floorboards which are original. Living room, dining, kitchen & 2 bedrooms. All prep to be included in quote, all materials, labour, rubbish removed & area free from dust so furniture can be moved back in. If possible it you can use a coating that would give extra protection against dog scratches that would be great. I have two & had a coating in my last house which really helped with maintenance. Please not the floor plan is estimate the spare room is 3.4 x 2.8

We need new wooden floors sanded and polished in the entry way of our home and corridor

Repolish concrete steppers that have been scratched. Exposed agg steppers.

Hi there, I’m looking for an experienced floorboard specialist to help restore a small section of timber flooring that has absorbed staining from a cleaning liquid. What I need: • Inspect a patch of older timber floorboards with colour absorption • Advise whether cut & polish is sufficient, or if light sanding + new coating is required • Perform the best method to remove or minimise the stain • Match the finish to the surrounding floorboards as closely as possible • Must bring your own equipment and materials Floor details: • Older timber floor with an existing coating • Affected area: approx. small patch (photos provided) • Access available and flexible timing What I’m looking for: • Someone experienced with timber refinishing • Good Airtasker reviews • Able to provide a clear solution before starting • Transparent pricing

Polish timber flooring and lacked

Im having the ducted heating system removed and i need these floor vents filled in with timber, sanded down and varnished / polished to match the surround. There is 6 of them to do. Roughly 300 x 100 mm

Lookig for an estimate for repairs on floorboards where there have been some scrapes and scratches caused by a fridge moving in the kitchen. I've attached some photos.

Hi I need someone to sand and polish my laundry timber floor in polyurethane that has been damaged by the sun the job is located in Hampton 3188

Polishing and sanding floorboards - 70m2.

Section of polished floor board replaced approx. 1m x 1m and skirting (previously water damaged)

Sanding and polishing kitchen and living area

Existing timber floor requires sanding back and refinishing with water based coating system. Approx 147m2 in total Quotes welcome

Kitchen Floor Refinish - ~56 sqm Sanded back and protective coatings Budget amount is just a place holder. - Due date: Flexible