Find an experienced flooring expert in Elsternwick

Floor leveling and sanding. Building renovation, Downstairs hardwood flooring to be sanded and levelled, upstairs flooring to be slightly sanded for highs. Approx 85m of engineered flooring to go down.

I have 4 rooms approx 20 m2 each. The skirting boards are for a period home and so are approx 185mm high. The person needs to have installed skirting boards before and understand scribing the boards in the corners and be able to do it I’m happy to provide the materials. Note that one of the walls has a bend in it under the bay window. The walls are brick.

I need assistance in removing some decking framing and replacing it. It will need to be done on separate days as there is some additional work that needs to carried out first before it’s replaced back. Notice may be short for the removal as I am working with another trade that will require the access. I am happy to remove all the boards but need the frame replaced so it’s compliant and level. It’s currently sitting over a tiled terrace. At this stage I estimate it to be approx 3 or 4 pieces of framing that run towards the building.quote to include supplying material please

Pressure wash deck and re stain Main deck 7.5x3.8 (includes stairs ) Small deck 3x4

I have a damaged section of flooring in my house, as shown in the attached photo. There is a localised gouge/chip and some lifting/damage around the joint between the boards. I am looking for someone experienced in laminate/vinyl flooring repairs to repair the damaged area and colour-match the existing flooring as closely as possible. I would prefer to repair the existing floor rather than replace the whole floor. If a board needs to be replaced, please advise before proceeding. Please provide a quote and let me know what repair method you would recommend.

Sand deck ready for me to coat 23 MSQ. Silver Ash from Radial Timbers

Part of an old kitchen flooring has come off. Looking for either vinyl sheets or basic stick on floor tiles to be installed. Seee pics attached with measurements

Looking for an experienced professional to clean, sand and stain the decked area, fence and gate. Deck: 7.5 x 2.9 Bench: 0.56 x 6 Screen: 5.6 x 2 Gate: 1.35 x 1.35

Have a small courtyard around 14-18 square metre with uneven pavers. Slight L shape with small 4-5 sqm overgrown garden in corner. I will get garden ripped out - keen to build a deck only about 5-8 inches off the ground for the entire area. Keen to get builder who can easily quote and complete the job in the next month or so.

Scope of work: - Remove old deck, clean up of old material and debris - Build new deck using Ekodeck composite decking (Ekodeck 137 x 23mm x 5.4m Riverbank Red / Estate Brown Designer Series Composite Decking) - Dimensions: - approx. 26sqm - 9260mm x 3080mm, with a cut corner

Looking for an experienced carpenter/handyman to supply, replace damaged boards, and restore our L-shaped front verandah deck. 1. Board Replacement: Supply and install approx 16 linear metres of 80mm Jarrah decking boards to replace rotted/damaged sections. Remove and dispose of old boards. 2. Deck Clean & Restoration: Clean/prep existing and new Jarrah timber (approx. 21m² total area). Apply 3 coats of Feast Watson Black Japan finish (TBC).

I'm looking for 7.5 mm minimum hybrid floorboards for a first story 2Br apartment. Floor plan attached. Measurements Two bedrooms 2.7 x 3.8 metres each Kitchen 5 x 2.85 metres Living room 3.5 x 3.9 metres Hallway 2.1 x 0.8 metres Toilet approx 2.1 x 0.8 metres Bedrooms and living room have carpet. The kitchen aand toilet have tiles so boards will need to be on top of these. Price to include supply partial board to level carpeted areas, floorvaords, carpet removal. Furniture will also need to be moved around to complete the job. Happy to receive quotes for installation only (I supply floorvaords and remove carpet).

Mint green or similar microcement to cover 20m2 of timber flooring in a residential home. Floor may need some stabilising.

Carpet two bedroom apartment: bedrooms, living room and small hallway. Kitchen, bathroom and toilet have tiles. Include removal of old carpet.

We need our skirting boards taken up and replaced with new ones

I’m looking for an experienced flooring installer or handyman to install SPC click vinyl flooring in my salon. What needs to be done: • Install click vinyl planks (materials already on site) • Light floor prep on cement sheet subfloor • Fill joints and smooth surface where needed before installing The floor is mostly in good condition but needs proper prep to ensure a clean, professional finish. Location: Elsternwick Timing: Ideally today or tomorrow (ASAP) Please only apply if you: • Have experience with click vinyl flooring • Understand floor preparation (levelling / skim coat) • Can deliver a clean, professional result

Hi, I’m looking for an experienced tradesperson to fully fix and finish a small flooring section in my salon as soon as possible (ideally in the next few days). The area is currently uneven with old bricks and timber, and needs a complete solution. Only 800mm Scope of work: • Remove loose materials (bricks, debris, uneven sections) • Prepare and level the area properly • Fill and smooth using screed or a suitable compound • Apply a smooth microcement (or similar) finish in a warm light neutral tone (beige/greige) • Deliver a clean, seamless, matte finish ready as final surface (no flooring will be installed on top) The final result needs to look intentional, minimal and professional — not like a patch. Location: 27 Horne St, Elsternwick Access: Immediate Please only apply if you have experience with floor levelling AND microcement or similar finishes. Let me know your availability and send photos of similar work if possible. Thank you

Looking for someone experienced installing hybrid click-lock flooring to help lay floorboards in my living room. Room size: approx. 25 m² combined (narrow hallway & rectangular living room) Details: • Hybrid click-lock boards • Skirting boards will stay on (boards will be installed with expansion gap) • Floor will be cleared and ready • No glue required What I need help with: • Installing boards • Cutting boards where needed around edges • Ensuring boards are straight and properly locked Tools: If you have flooring tools (saw, tapping block, spacers etc.) that would be ideal. Timing: Should take around half to a full day depending on experience. Budget: Open to offers.

I have three 2.4 meter Baltic pine floorboards that need replacing. I have also decommissioned our gas central heating so need the 11 vents and 1 air vent covered with Baltic pine. Ideally you will use used pine boards that are already polished.

I’m looking for an experienced professional to sand and polish timber floors in a small commercial space (hair studio) located in Elsternwick. Details: • Date: Thursday 2nd April (must be available this day) • Location: Elsternwick VIC • Size: Approx. 35m² • Scope: Sanding and polishing existing timber floors • Space: Small studio, easy access Ideally looking for someone who uses dustless sanding equipment and can recommend a suitable finish (matte or satin preferred). Please include: • Your experience • Photos of previous work (if available) • What finish/products you recommend • Your quote and availability Reliable and detail-oriented professionals only. Thanks so much, Eli