Find an experienced handyman in Missenden Road

Install 2 brackets (4 screw each) on the wall shown in the picture (furthest end). Its gyprock, so studs would be needed. Probably - Timber support into the studs. There is a wooden bar at the top (if you zoom pic you will see). So top screws can go in that, but additional wooden stud might be needed. Total 8 screws needed. Please bring tools and screws and studs. The support system will hang a background support system for paper backdrops for photo studio

Install photo studio seamless paper background support system on the wall shown in the picture (furthest end). Its gyprock, so studs would be needed. Probably - Timber support system into the studs. There is a wooden beam at the top (if you zoom pic you will see). So top screws can go in that, but additional wooden stud might be needed. Total 8 screws needed. Please bring tools and screws and studs. The support system will hang upto 4 paper rolls eventually.

Hi, I need an experienced handyman to install 5 new blinds (from Tuiss Blinds Online) in my apartment. The job involves replacing the current blinds – I will remove and dispose of the old ones. Job details: - 20 holes to be drilled (some existing holes can be reused) - Ceiling layer: ~10mm gypsum/plasterboard, then a perforated metal angle/frame (part of the balcony door/window frame), then concrete - Requires screws with wall plugs/anchors suitable for concrete - Indoor installation, balcony door/window area What you need to provide: - Tools and equipment for drilling through plasterboard, metal, and concrete - Suitable fixings (screws and wall plugs) for secure mounting - Ladder (ceiling height 2.7m) What I will provide: - New blinds (Tuiss Blinds Online) - Clear access to the work area - Disposal of old blinds

Moving out of a 1 bedroom apartment and need a few odd jobs doing. Like removing picture hooks and filling hole in wall etc.

Help install a kitchen, it's in part, I'm looking for someone who can put each piece together. I'll help too, thanks.

I have an industrial large steel framed mirror that has some water damage (surface rust) to the bottom of the frame, and the bottom of the mirror. I’d like the mirror removed from the frame, the frame sanded/cleaned up and repainted in satin black, and the mirror repaired/replaced and reinstalled. I pickup and delivery to Camperdown please. 🙏 I’m happy to provide quality rust protectant spray paint 👍👍

Replace old roller blind and install new one I have.

Folding door to the bedroom came off the pivot hinge that is holding the door in the rail. I have had it before on the other door side. The screw had unscrewed itself over the years and fell into the door. Door needs to be taken off and then reconnected on top. Any experienced people out there that deal with folding doors a lot?

We have an old dryer on brackets that needs to be removed. A new heat pump dryer then needs to be installed ontop of our washing machine. We have a small laundry in an apartment in Camperdown.

Three floating ikea shelves to be installed on gyprock

Assemble a kitchen corner triangular cupboard. 171high, 66 wide 35 deep. Flatpack.

Please refer to attached photos and advise approximate cost to repair and re-grout tiles. We are going to install new shower screen, toilet unit and vanity. Bathroom is appx. 2.5M x2.5M

Need a small under stair case area covered with gyprock and painted, small wall area painted. paint supplied and possibly some ceiling tiles changed.

Cut and install stone for floating vanity. Waterfall edge front. I already have the stone, 2x pieces need to be cut down to size (only one cut each piece). Top piece needs 2x holes cut (for tap and hole for over counter basin). The two pieces need to be cut and fixed together at a 90degree angle. Builder will build the frame, you just need to cut and install the stone. Dimensions (wall to wall is 97xm and depth of the vanity is 30cm and then the front piece should be the same 97cm x 30cm).

Need a Handyman for a couple of hours today. Like installing a light mirror in the wall, tighten screws, fix/replace door hinges, etc

The tap has become detached and wobbly due to the fittings in and below the bench becoming loose. Does not require any plumbing work, job is probably most suitable for someone with cabinetry experience or general handyman work - might need a jigsaw or some wood glue. Maybe even a 3D printed component. Edit - we also have a very heavy mirror to hang on the wall and are looking for advice or a quote. Please comment on this if it’s suitable for you to take a look it while on the property.

Front door needs flyscreen installed. Flyscreen and spline provided. Don't have a drill though if you want to remove the frame.I live in a ground floor apartment and the door faces a quiet street. No stairs. Not in a rush, we can work out the best time.

Fix dent the size of a 5c piece from rear door. Buff surface scratches from top of boot door. Tiguan MY24. Sorry the pics aren't great. A lot of glare.

We have completed Reno on kitchen and need kitchen tap connected back to water and will soon Reno bathroom and need to cap all water supply asap

-Fix lighting - when you replace new lightbulbs the lights don’t go on for 4 lights -Fix sliding door on wardrobe- doors have come off tracks -Fix loo holder - handle needs to be screwed back in to wall -Fix laundry cupboard - small door has come off bottom shelf of laundry basin