Find an experienced flooring expert in Inner South Melbourne

Install laminate flooring onto concrete floor in Brighton. I will supply the laminate boards.

Remove the carpet on the floor and install hybrid flooring for 3 rooms. Approx 35 square meters including wardrobes. Can supply the timber or if you could supply the quality products(approx 39 square meters). Looking for quality SPC or hybrid flooring, 9mm-10mm thinkness, with 30 years or plus domestic warrenty products. Please share with me the product specification if you can supply the materials, prefer the website of the producer/brand. Currently is working on self painting of the rooms during the weekend, the installation date can be confirmed as soon as the painting is completed. Would like to get quotation first to plan on the budget of the replacement. Please quote the project total and the cost break down. Also, please advise on the levelling price per square meter, just in case if levelling is required after removal of the carpet, although I feel no levelling is required. Thank you.

Remove 30sqm new carpet Remove 34sqm of tiles Level concrete slab as required Lay 64sqm 4.5mm vinyl planks (provided) *Leave bedrooms and bathrooms

Lay down floor boards and attach skirting boards in several rooms. Starting with smallest.

Installation of vinyl roll flooring and prepping for hallway, pictured attached. One section is concrete, one section timbre flooring. Vinyl supplied by us, only prepped and installation is needed.

Install vinyl floor planks over exposed concrete slab . Room is approx 8 sqm.

28m2 of existing flooring. Glued down. Needs to be removed & replaced with Hybrid flooring. Single common aerea. Ground floor unit with access via court yard. New flooring Aged Grey Oak from CarpetCall. Code UL1867. New flooring will be provided.

Looking for an expert to install 85sqm of Herringbone floorboards in our 3 bedroom house in Aspendale Gardens

I need someone to install my laminate flooring (bedroom of 11 square meters approximately)

I need a few damaged vinyl floor planks replaced in Caulfield South. I don’t have replacement materials, so I’ll need you to help source matching planks (as close as possible to the existing colour and finish). Scope: • Inspect current flooring • Source matching planks • Remove damaged pieces • Install new planks properly • Clean up after completion Please quote including labour and materials.

I have 25m2 of hybrid parquetry flooring i need installed as well as 10 linear m of skirting.

Flooring project. Need someone to remove the skirting boards, and once the flooring is completed coming back on the 20/05 and re install and re paint the skirting

Engineered Oak Flooring Installation – 170 sq/m We're looking for an experienced flooring installer to lay approximately 170 sq/m of engineered oak floorboards in our home, which is currently undergoing renovation. Scope: Herringbone pattern through main areas with straight plank borders Existing section: install over existing pine floorboards New section: install onto concrete slab Materials (supplied by us): Herringbone boards: 900 x 150 x 15mm Straight boards: 1900 x 190 x 15mm Happy to arrange a site inspection so you can provide an accurate final quote. Please include your experience with herringbone installation and availability when responding.

We had a door removed to install floorboards and due to part of the edging the door hasn’t been reinstalled yet. No idea for quote so happy to offers

Hi, I need help installing self-adhesive vinyl planks (Gerflor Senso) in my unit in Carnegie. Areas: Living room, dining and kitchen,please see attached layout, approx - 35 M2 Looking for someone who has experience with vinyl flooring and can ensure proper surfaces preparation and alignment.

Amended: Lay approx 22 m2 of hybrid floorboards in two rooms. I have the flooring, so the job is just to install it. I need a quality job with no gaps etc.

Lay recycled 12mm laminate flooring in kitchen & laundry on concrete slab. Approx 25m2

Already have boards and materials. Must have flooring experience.

Looking for someone experienced installing hybrid click-lock flooring to help lay floorboards in my living room. Room size: approx. 25 m² combined (narrow hallway & rectangular living room) Details: • Hybrid click-lock boards • Skirting boards will stay on (boards will be installed with expansion gap) • Floor will be cleared and ready • No glue required What I need help with: • Installing boards • Cutting boards where needed around edges • Ensuring boards are straight and properly locked Tools: If you have flooring tools (saw, tapping block, spacers etc.) that would be ideal. Timing: Should take around half to a full day depending on experience. Budget: Open to offers.

75sqm of hybrid interlock flooring installation

Need couple of floor to be replaced,fix the floor and sand and polish , I want to know how much I get charge per sqm

We have hardwood floors polished and don’t want to redo we just want to make them look super tidy and clean/shinny.

**Looking for two quotes** 1. We have one carpeted room with floorboards underneath. Area 16m2. Please provide quotes for sanding and polishing floorboards both with and without carpet removal. 2. The rest of the house has no carpet, please provide another quote for sanding and polishing the whole house which is about 80m2.

Polish stained timber floors in a small area where there are light scuff marks dinning chairs

I’m REQUEST FOR QUOTE – FLOOR SANDING & POLISHING Hi, I’m currently seeking a quote for sanding and polishing approximately 108m² of hardwood floorboards. At this stage, I’m after an approximate quote only, as I do not yet have access to the property to arrange a site inspection. I’m happy to answer any questions promptly if needed. Scope of Works: * 3 x Bedrooms * 1 x Hallway * 1 x Lounge room * 1 x Dining room (In the picture I’ve provided you can see the areas marked in green on the floor plan.) Job Details: * Property is vacant * Carpets have already been removed * All staples, tacks, and trims have been cleared * Floors are in great condition * Areas are fully accessible and ready for work Finish Requirements: * High-quality water-based satin finish * Durable, long-lasting product (no low-grade materials) * Clean, professional result with attention to detail * Must be completed using modern equipment and experienced tradespeople.

Remove Carpet + Sand & Polish Timber Floors (83m²) + Skirting Looking for an experienced flooring professional to complete the following work at my property: Scope of work: * Remove and dispose of existing carpet from approximately 83m². * Prepare timber floors for sanding. * Sand and polish timber flooring using a water-based finish (3 coats). * Sand, prepare and finish the existing skirting boards to match the floor finish. * Clean up the work area upon completion. Property details: * Total floor area: 83m² * Existing flooring: Carpet over timber floorboards. * Please bring all necessary tools and equipment. Please include in your offer: * Your experience with timber floor restoration. * Photos of similar jobs you’ve completed. * Whether your quote includes carpet disposal and all materials. * Estimated timeframe to complete the job.

Timber floor polish required. High gloss finish. Area is one room. Approx 4m x 4m

Less than 1 sqm floorboards that need sanding/staining and polishing to match the rest of the floor

Ripped up carpet to find floorboards. Looking to have it sanded and polished and maybe tint. Carpet tac strips have left holes to be filled.

- Chevron timber flooring - Good condition, just dull in areas - No sanding required, clean + polish only - Empty house, easy access - Need done before move-in Looking for someone experienced with timber floors.

Sand and oil garden deck. There is a heavy table on deck that would need to be taken off

Theres approx 45m2 of flooring to be sanded and polished to the same colour (as close as possible). All in one room. Furniture will be moved out.

Polish hard wood floor and water based paint 70sqm

I’m looking for an experienced professional to sand and polish timber floors in a small commercial space (hair studio) located in Elsternwick. Details: • Date: Thursday 2nd April (must be available this day) • Location: Elsternwick VIC • Size: Approx. 35m² • Scope: Sanding and polishing existing timber floors • Space: Small studio, easy access Ideally looking for someone who uses dustless sanding equipment and can recommend a suitable finish (matte or satin preferred). Please include: • Your experience • Photos of previous work (if available) • What finish/products you recommend • Your quote and availability Reliable and detail-oriented professionals only. Thanks so much, Eli

Need Sanding and Polishing Wooded Floorboard, the machine will be supplied on hire by me, can pay hourly basis/day basis or project basis. Attached picture if of the machine to be hired for the job. Tradie must use own protective gear (mask and earplug)

I need to get the sanding and polishing of the floor boards on 3 bedroom’s. Please see the dimensions of the rooms in the attached pic.

Need to fix and polish an old flooring.sq area 75sq meters

Parquetry floor needs sanding and polishing. Lounge/dining/kitchen and hallway, about 50m2 in total. Some water damaged areas need repairing (pieces lifted and replaced), probably 2 square metres or so. Will need to source timber to match what is in place, which might be a mix of turpentine, blackbutt and spotted gum or similar. Finish needs to be 2 coats of hard wax (Osmo or similar). House will be vacant for about 2 weeks from March 12th, this is the window of opportunity.

Sand and polish around 40 Sqm fooor

Sand, fill holes, and apply 3 layers of coating to hardwood floorboard. - size: 60 square meters (approx) - property type: single story unit - coating: water based polyurethane - location: living room, kitchen (no need to sand under cabinet, will remove toe kick), hallway, 2 bedroom, 1 closet - note: kitchen floor boards have many nail holes so require mixing sand dust with PVA glue and fill the holes in

Existing timber floor requires sanding back and refinishing with water based coating system. Approx 147m2 in total Quotes welcome

Kitchen Floor Refinish - ~56 sqm Sanded back and protective coatings Budget amount is just a place holder. - Due date: Flexible