Find experienced local carpenters in Strawberry Hills

I need someone to help with designing and building a wood joinery/entertainment wall in my new apartment. The wall is roughly 2.75m and a blank canvas at present. Pictures attached for the vision - just not too sure who I need to work with to bring it to life! Any advice gratefully received.

Large solid wood dining table currently has thick lacquer on it. We would like it to be sanded back and stained with a tinted wood oil we have purchased. We also have three plywood desk tops. We need them to be sanded and stained with a white wood oil. It’s possible to do this at our home in the garden, or to remove and bring back the pieces. The terrace would need to be vacuumed and cleaned if you do it there. See pics attached. We will supply the oil stains, everything else would need to be supplied by you.

Very quick task - good for someone already in the area. I’ve got two 1m pieces of 70x35mm pieces of timber that I need cut at the ends at 45degrees. I don’t own a saw.

In Surry Hills, Looking for a carpenter to amend an existing daybed platform and step structure. The job involves adding hinges and applying a plywood sheets, stained to match the existing floor (photo available). Scope: -Add hinges to the current daybed base and step structure - Apply plywood over the existing frame - Stain plywood to match the timber floor - Cut and fit top panel so the daybed can recess inside the frame Measure the space and recommend suitable plywood options (material cost not included)

Fix the green railing or replace it

Hi guys, I need 6 tasks done in a property that is mainly joinery work that align with photos to come; - Picture 1- I have new joinery doors for a kitchen that I just need installed. New doors will need hinges cut in and will also need new handles installed - Picture 2- there’s a piece of timber flashing that needs to be fixed above the kitchen joinery - Picture 3- there’s a piece of plastic flashing that needs to be cut and glued as shown in the picture. - Picture 4 and 5- there’s 2 handles that need to be fixed to the sliding door into the bathroom in the locations shown. Please make sure the bogged areas from the previous holes are missed on both sides of the door when doing this. - Picture 6- there’s a piece of melamine board that needs a jigsaw to cut as shown in the picture and then just screwed down into the board below All equipment supplied. Just need a joiner and your tools… Cheers, Mike

A skilled carpenter, craftsperson- to make a custom fireplace surround, and mantle shelf. Specific measurements and design requirements, but would love a maker who has some of their own design ideas and passion behind making such pieces. It’s an 1920s building so looking for a classic design. Hoping to include a facia but not sure I can with such specific dimensions. Freestanding. 94cm wide 140cm height 20cm deep - height and depth are flexible and will be guided by the craftsman! White in colour.

I attempted to fix a scratch on my white cupboard, but the repair didn’t go as planned. Now, there is a larger darkened area that stands out against the white surface. I need a professional to properly restore the cupboard to its original appearance, ensuring a smooth and color-matched finish.

We’re looking for a skilled woodworker or handyman to help us assemble and carve wooden floorboard tiles into two custom pieces that fit neatly around our stove. These pieces will serve as temporary inserts to create a flat wooden surface, level with our countertop, for photoshoots. We’d like two separate inserts in different colours. The task involves: Assembling several wooden floorboard pieces into one solid, stable board (e.g., gluing or another secure method). Measuring and carving the combined board to fit snugly around the stove. Ensuring the finished piece is level with the surrounding countertop. Sanding or finishing the edges (if needed) for a clean and professional look. Materials provided: Wooden floorboard tiles in two colours. What you’ll need to bring: All necessary tools and equipment for assembly, carving, and finishing. Details: Location: Surry Hills, NSW Date: Flexible, but we’d prefer completion within the next month.

Need timber panels replaced on dining table.

I’m after a carpenter to: 1. repair a gap between a window sill and a kitchen bench 2. Replacement of a section of skirting (20cm x 20cm) 3. Repair/make good some edging down a wall/kitchen benchtop

Hello. Pls refer to the images attached for details Long story short the cabinets are pretty old and cheap but this is what I’m doing so before anyone tells me to replace them etc. I don’t want to hear it lol. Read da job and decide if you can do it or not. I will reimburse/transfer the cost of all additional consumables and materials bits bobs required to finish this. 1. REPLACE MDF PIECE - under the sink had a leak that’s now been repaired but unfortunately I let it go on for long enough for the water damage to rot that base board part. I’ve removed it and gotten a new piece of MDF cut to exact size to replace it. I was going to use furniture brackets to drill in and use to support the new piece but those got moved to storage so it’s easier if you get some new ones or whatever idea you think will work to hold up an 80cm x 60 cm piece of MDF 2. PAINT BASE CABINETS - Finish/go over my amazing midnight manic piece of work I started. Primer and paint provided. Oil base. Should have some sand paper and rollers/paint brushes left behind but get what you need from Bunnings. 3. Readjust the new door hinges I did a meticulous job guesstimating with the drill. They’re not exactly level and the one with the drawers overlaps the door part so you can’t open it properly lol. The doors will fit. Just needs fine tuning 4. ATTACH HANDLES - easy part 5. FINISH STICKY TILES - easy part WORK BENCH: Yeah idk. It’s an antique/vintage timber bench and thought I’d fill in the groove markings and gaps to make a flat even sealed surface more appropriate for food preparation area so I poured Agnew’s Water Putty to level the gaps and didn’t quite think through what my next move would be. I would say it can probs be mostly removed with a sand and a simple cleaning and sealing of the timber would suffice. Make it look acceptable.

I need someone to build and install a wooden board for 5 coat hooks (see photos for the sort of thing we’re looking for). We would like the length of the wooden board to be 70 cm, and the height 17cm. The 5 hooks are to be evenly distributed on the wood. Please see the photos attached showing the type of detailing that we have on the skirting boards in the house. We would like something in keeping with this for the board around the outside. **Job Details:** - Build a decorative wooden board similar to the attached example - Paint it white - At my home, drill in the hooks and then install on the wall (bring nail(s)). We want it to sit flush with the wall.

New renovation and need a joinery for the kitchen. Fully integrated. The $200 covers a review of the drawing , site measurement and qoute. Ideally you will then make the kitchen and install in late Jan.

Build simple but solid shelves using supplied 2400x200x50 rough-cut hardwood sleepers and 125mm trumpet screws. Must bring own 18v/24v quality drill/driver to get this job done. This task will be 4 hours.

Purchase wood, deliver and construct three shelves on-site out of wooden. We can provide the plan with dimensions. Can meet you at Alexandria Bunnings to purchase and cut wood, you transport to our art studio in Moore Park to construct.

We need a racquet display made up to fit a rectangular window which we can put up and take down at night. Needs to be appealing as it will act as shop window. Measurements of the window is 2m wide by 90cm high.

I need a piece of ikea furniture cut (fibreboard). Should be pretty easy, I just don’t have the tools. It’s the top of a desk. I have measurements to cut written on (see photo)

I've got a white wooden table, which now has some stains. Looking for someone who can fix it.

We have a project that would need an installation of a wall panel on top of banquet cabinetry, with the details as below: - The client has purchased the Modulo panel - All other materials are expected to be included in the installation quotes (including the wood batten needed behind the Modulo panel) - The wall panel will go on top and on the side the wall sizes are is 1100 x 2870 & another wall 1100x2300 - Due date: Flexible