Find professional cornice repairs near you

Install 12m of cornice, 9 mitres in kt8 asap.

Cornice was removed when we had building work done, needs replicating for the small corner as shown in the photo

Cut cornice for top of kitchen

We have a new wardrobe which has a gap between it and the wall I’d like to fill with a cornice.

Looking for someone experienced with installing polystyrene coving/cornice to fit Orac CX106 in our entrance hallway. Hallway is approx. 3.1m x 1.1m so will be 8.4m total, with 4 internal corners. We already have: • 6 x 2m lengths of Orac CX106 • Orac DecoFix Pro adhesive • Orac DecoFix Ultra joint adhesive Need it cut, fitted, joints/corners finished neatly with caulk and left ready for painting. No old coving to remove and no painting required. You will need a proper mitre box etc. Job is in Battersea SW11

Cornice cutting and installation We have a section of cornice that needs to be installed between two existing corners, as shown in the photo. We already have the matching cornice. Looking for someone experienced with cornice/coving who can: * Measure and cut both ends to the correct angles to match the existing cornice * Fit and secure the new section * Finish/fill the joints neatly Please bring the appropriate cutting tools. It should be a relatively small job for someone experienced with cornice installation. We have the cornice glue and angle cutter too but it’s not the right size.

The wooden cornice underneath my bedroom ceiling has come off. Seems like it wasn’t glued properly and it needs glueing. There’s only that one patch of glue used in that corner rather than on the whole thing which is insufficient to hold that amount in place. Glue surface is cornice to iron beam so need the correct glue. My ceilings are high in a converted mill buildings will need a tall ladder to complete task.

Put up cornicing on the wall, the wall is approx 5 m wide and 2.5 length

Plasterboard cornice needs putting up. Square room approx 4x4m. We have acrylic grab adhesive. Edges need to be mitred for correct angle at corners.

I have several lengths of 130mm x 130mm x 42 plaster cornice that needs fitting in three bedrooms.

I need a small piece of cornicing removed cleanly as I will be installing a built in wardrobe. See image attached. There is parking on the property.

around 4m of kitchen cornice (top of kitchen) to be installed. Left photo is my kitchen, right photo is example of what the cornice looks like. Need some with carpentry skills

2 triple (double & single) wardrobes to be fitted in bedroom

My new kitchen is all fitted. All I have left to do is put the cornice on top of the cupboards and I have a small piece of skirting left to do under the dishwasher. I have a big mitre pull down saw which should be all you need to do the job.

We have x6 rooms where we need the cornice cut 30cm on each side of room to allow for curtain track to sit in

We have just finished plastering and now require a plain white coat of paint on the ceiling and some of the white cornice beading attaching to the edges.

Just a few boxes, bits of carpet etc PLUS help to fit Cornice bars to ceiling ... no more than 3 hours

Install “dentil” cornice especially (LED uplighting provision). Many mitres. Must be a specialist to ensure perfect mitres / joins.

Require plaster cornice installed in bathroom and in rare extention. 11 mtrs in bathroom and 7 mtrs in rare extension.

Finish installing ceiling cornicing. This job requires someone experienced due to the style of cornicing.