Find a professional kitchen cupboard repair service near you

The cupboard base is damaged and needs replacing with a moisture-resistant board first. What I need included in your quote: – Remove current shelf & damaged base – Supply and install a new moisture-resistant base – Supply and install 2 deep pull-out drawers suitable for pots/pans – Ensure drawers run smoothly and support weight – Clean up & dispose of old boards Looking for someone with carpentry experience – not a basic DIY job.

I. Would like my kitchen cupboards painting, I’ll provide the paint if you can provide the materials.

A rat has chewed the wiring to our fridge/freezer and it isn’t working. I’d like it safely repaired so the fridge. You’d need to be able to find a way to access the plug and fittings as the kitchen is fitted and the wire comes through the back of a cupboard to a socket in the cupboard.

I need a kitchen cupboard taken off and moved higher up the wall in the same place

Removal of large kitchen cupboard/pantry that is currently fixed to tiled wall, removal of wood too please.

I need some kitchen fronts replaced with new (non pre drilled) fronts. I already have the new fronts. Exact measurements are going to be critical, especially with the drawer fronts, to ensure everything stays aligned. Plinth. After switching from an integrated dishwasher to a standlone unit, I need the plinth cut to fit under the sink cabinets. 4 drawer fronts. I need the fronts of 4 drawers replaced. I've had new drawer fronts made to measure to replace the existing fronts. However the fronts do not have pre-drilled/pilot holes, so the positioning of the mounts to connect to the runners will need to be calculated and drilled. This needs to be mm accurate to ensure the fronts are all aligned and that the spacing between fronts is consistent across all 4 drawers. Under oven front panel. I need the panel under the oven replaced with a new panel that I've had made. I'm not exactly sure how this is fixed. Extractor Hood Cover. I need a new extractor hood cover fitted. There are no predrilled holes, so the placement of the hood cover will need to calculated and holes drilled at appropriate locations to allow fitting. Cupboard door. I've had a cupboard door made to replace an existing door, to match the colour of other doors. This will need to be fitted using the flush door hinge from the existing door. Ideally this work would be completed on either 9th, 14th or 21st November. I'm in central London, W1, so there is no private parking. Either on street parking (meter) or a car park will need to be used if driving.

A broken cupboard door to be applied

Hi I need two small holes under my kitchen cupboards sealed with wood eg plywood. Do you supply the wood? If not can you recommend where I can pick up the plywood to fill the gap. I'll send video and pictures. It's not a big gap and don't need a perfect job because it's under my cupboard. I just want it sealed.

Need new hinges on cupboard door and door rehung

I have fitted a new kitchen unit, I need the door put on - requires the hinges to be recessed into the flat door and then hung

10 doors, 3 drawer fronts, 2 sides 4 plinths to be replaced will be handle less doors

Create a timber infill and fit above the cupboards to hide ducting. Finish with a matching cornice (existing is soft/polystrene material). Make good, seal, paint nicely. Supply all materials except paint. Images show current gap and a mock up of what I need.

I require a handyman to cut my corner kitchen cupboard in half so I can fit a slimline dishwasher. The pictures are attached and job is in SW10. Please give me a quote.

A drawer needs refixing and cupboards need aligning

I need to take out a cupboard In my kitchen so I can place a freestanding dishwasher in there. I don’t need the dishwasher connected just the cupboard door taken off and shelves to create an open space

Slight swelling to the edges of one door under the sink

I am looking for a carpenter who can build a cupboard (no door) in our kitchen wall (70x50 cm opening, please see photo). We looked into buying one from B&Q but it is two cm too tall, but perhaps it could be slightly shortened? We also have a few squeaking floorboards, that need some attention.

The old dishwasher was removed and a new one was supposed to be installed but the contractors were not able to fit it because there is a panel at the back which they were not able to remove in order to plumb in the new dishwasher. The panel appears to be firmly fitted but needs to be removed.

I need a kitchen cupboard altering as we have a new American style fridge which is higher than expected at the front so doesn’t fit in space of previous - kitchen cabinet will need cutting shelves will need raising - I am also looking to create space under our island for people to sit - this would mean refashioning kitchen cupboards under the island

My kitchen cupboard is coming away from the wall and I'd like it re hung