Find a professional internal door contractor near you

Install 3 internal crittal aluminum doors including adding new architrave from wood and installing these door handles.

Need a person who can fit two internal doors. Doors need cutting to size to fit, so need a person with tools and with knowledge of what they are doing.

I want to change 5 internal doors in my house,

Need to replace house internal doors ( *5)

New carpet fitted in a bedroom, two internal hollow doors now need to be planed and sanded at the bottom to allow a 12mm gap. Roughly 10mm needs to come off

replace about 12 internal doors. one has slanted side

I have 6 new Internal doors to be fitted including all door furniture

Bedroom and living room doors swapped

I have 3x new doors that need installed for 2x bedrooms and a bathroom. The doors are plain and will need handles and hinges installed, as per photos. One of the doors will need a few mm shaved off to fit.

Fit two new bedroom doors

I need to hang an internal door. The frame is currently painted and there is nothing existing already there (e.g. no hinge inserts, no linging, etc.)

4 internal doors to rehang and a cabin bed to dismantle new one to build

Washing maching moved blocking the laundry room door. Hinges are on the otherside of the door. Need door removed to gain access to room and if possible reattach door

Moved into a property and the previous owners removed the bedroom door (space saving presumably) and filled over the gaps for the hinges. Need the door rehanging and new hinges and handle installed. The door is already cut to size as it is the door that was there before.

I have 11 internal doors that needs to be fitted and old ones removed.

I need a cat flap installing on an internal wood door and a door air vent

I need a basic internal door installed, 197x72cm. I'd also need the door picked up.

There are 2 internal doors missing which we would like replaced but need to be opened the opposite side

An internal door fitted to the lounge

Internal door needs to be removed and disposed of, I tried hammering the pin with a screwdriver but it was too tight so need some assistance.