Find a professional internal door contractor near you

I need a tradesperson to supply and install a complete replacement bedroom door. This must be a parts + labour job, with you sourcing and purchasing the door and all required hardware. Existing door: * Approx. 834mm wide × 2040mm high * Existing frame stays in place Replacement door: * White internal door * Approx. 2040mm high × 826mm wide × 40mm thick * Six-panel woodgrain design preferred * Hollow-core is fine Work required: * Supply and purchase the new white door * Remove and dispose of existing door * Supply and fit new hinges * Hang, align and trim the new door as required * Supply and fit a new door handle * Supply and fit a mortice sashlock with thumbturn and emergency release mechanism * Lock must allow locking/unlocking from inside with the thumbturn and unlocking from outside with a key * Supply and fit matching latch/strike plate, keys, screws and all required fixings * Cut/recess door and frame as required for the hinges, handle and lock * Ensure door opens, closes, latches and locks correctly Plaster/wall repair: * Wall/plaster immediately next to the door frame and architrave is cracked and damaged, as shown in the photos * Patch, fill and make good the damaged plaster edge * Leave the repaired area solid, neat and ready for painting * Include all materials required for the repair Please quote one all-inclusive price covering: * Door * Hinges * Handle * Mortice sashlock, thumbturn, release mechanism and keys * Latch/strike plate * All fixings * Plaster repair materials * Labour * Old door/waste disposal Budget: £400 all-in. Please state your total price and confirm the door and lock you intend to supply. No new door frame is required.

We need a junior handyman / builder’s help to join our renovations team today to help with finishing touches: painting (touch ups only) and internal doors installation.

Hi! A door handle on one of our rooms fell off, we need it reattached and functional before midday on Saturday 3rd. I have the original screws, as well as some spares that are thicker and longer. We have a drill but no screwdriver.

to trim a hollow core door, fit latch and handle and hang

Internal door won’t latch shut – strike plate/alignment issue I have an internal bedroom door with a Glutz latch which has suddenly stopped closing properly. The latch itself appears to be working and lines up vertically, but it is not engaging/clicking into the strike plate on the door frame. I believe the strike plate or door alignment needs adjusting slightly, possibly by repositioning the plate, enlarging the opening behind it, or making a minor hinge adjustment. Looking for someone experienced with door furniture/locks to diagnose and fix it neatly, ideally without replacing the existing lock mechanism unless genuinely necessary. Should be a relatively small job. Photos available.

I need 3 internal doors and handles fitted. I have attached the image of the new door and the 3 that will need replacing.

We've had a new uPVC back door fitted and the internal reveals have been left unfinished: exposed brick, old timber and expanding foam on both sides and across the top. Looking for someone to make good all three reveals so they're ready to paint. Scope: • Remove any loose material, trim excess expanding foam • Board the reveals (plasterboard dot-and-dab or bonding coat, whichever suits) with angle beads on the external corners • Skim finish to a smooth, paint-ready surface, neatly meeting the door frame and existing wall • Once dry, run a neat bead of paintable caulk between the plaster and the door frame • Tidy up and take away all waste Please bring all materials and tools. Painting not required. Standard single door, reveals roughly 10cm deep. Location: Purley, CR8. Please include your price and availability, and let me know if you've done similar work.

Hang 3 x internal doors ...........

To hang 6 new internal doors to existing door frames.

1930s house with original internal doors that will be kept. Hardware has been painted over multiple times so screw heads will likely need scoring out with a blade or knife before they’ll turn — not just a straightforward unscrew. Please bring a multi-tool/utility knife for this. Doors to be kept intact Replace hinges on 9 doors (7 heavily painted) I have the replacements Remove and reinstall 3 heavily painted latch plates Remove and reinstall 2 heavily painted forend

Door is fitted with handle and hinges. It needs to be hung. Plus it's a bit short in height so might need to attach a piece of wood panel .

Finish skirting, architrave round 2 doorways, hang one internal door

Trim the bottom of one existing internal door to clear new flooring, then rehang it. Please bring the tools, check the clearance before cutting, and seal the cut edge. TN37 6QU. Flexible timing if you’re already working nearby.

I have the door I just need it internally fitted

Inspect faulty door latch and either fix it or advise if a new latch is needed and then replace once the new part has arrived

I need one internal door shortening. I got a new carpet recently and the door no longer clears the floor. It just needs a slight trim. The door has been removed so would want it then putting back on the hinges.

A small job for an experienced carpenter/joiner to hang a new internal door. The door has already been planed to size and fits the opening, so won’t need any resizing or trimming. I just need someone to: * Fit and recess the hinges into the door and frame. * Hang the door so it is straight, flush and operates smoothly with even gaps. * Fit a pull handle to the door (pull handle only – no latch or lock mechanism). The frame is already in place, and the door is ready to be hung. I’ve attached a photo of the opening. Tools: * I have tools available, including a planer and chisels. * Ideally, you’ll bring your own professional tools. Parking: * I’ll cover the cost of parking. Looking for: * Someone with experience hanging internal doors. * Attention to detail – I’d like the door aligned properly with clean hinge recesses and a good finish. Please let me know your experience and, if possible, include photos of similar carpentry work you’ve completed.

Need someone to pick up and dispose of an internal door. Is currently outside our house in our carport. Has glass in door and this makes the door heavy. Do not now the weight of this door. Please see picture attached.

Hi all! I have a door, unsure wether it is the right size so will need to maybe be cut down. I have hinges and the handle needed.

Job is to swap back and re-hang the internal doors replacing the current fire doors. Including opening up a stud wall and putting double doors in the dining room. The doors are labelled as to which one goes in each room, so they should fit okay. These are the old doors originally present. So each of the doors will need to be re-fitted and all the doorways made good. Just as a note, some of the doorstops may need to be changed. With a few holes being filled where the door closers were. I would expect a job to take two days for someone that knows what they’re doing. Price is for labour happy to pay for any materials required. You’re welcome to use either the hinges fitted to the doors or the hinges fitted to the fire doors. There’s approximately nine doors, see photo