11 Carpenters in St Peters

Raise Aircon ducts to create storage space

St Peters NSW, Australia

31 Jan 2019

$400

Hi, We have three air con ducts above our mezzanine floor which need to be lifted to create space for storage/access. Currently we have to walk around them otherwise we walk into it or hit our head on them (very painful). The mezzanine floor was built after the ducts were installed and the aircon is no longer in use. Please see photos attached. Rather than dispose of them I would prefer to have them moved up higher in case they need to be used one day in the future... The one at the far back side has already been lifted up but not the other three... Can you help? Anytime this week or next week is OK.

Install skirting boards in kitchen

St Peters, New South Wales, Australia

24 Dec 2018

$200

I need a tradie to install skirting boards in my kitchen. I already had them installed once, but after we got new floorboards I had to pop them off and now they don't fit because they are too tall. You'll need to trim off the height and reinstall them, possibly using a saw that is able to cut long straight pieces (hand held circular saw won't do). There are 9.4 metres of skirting boards in total. Relatively small-ish kitchen. As said, I have all the old skirting boards lying in a pile on my kitchen floor, but I can't rule out that you may have to drive to Bunnings to pick up some more black melamine board to finish the rest. So if you got a ute that's great.

Walk mount for cabinet

St Peters, New South Wales, Australia

16 Oct 2018

$60

We have a custom built wooden CD cabinet which needs to be mounted on a brick wall. The cabinet sits on the floor but needs to be mounted at the top to stop it from falling forward. There are brackets inside the cabinet but not sure what kind of brackets needed for the wall. Cabinet measurements are 150cm wide, 120cm high, 20cm depth.

Mount cabinet in laundry

St Peters NSW, Australia

23 Sep 2018

$75

Need cabinet mounted in laundry and dryer put ontop of washing machine. The cabinet is 500mm wide and 600mm high and 300mm deep. The dryer just needs to be lifted onto top of the washing machine.

Rug overlocking

St Peters NSW 2044, Australia

20 Jul 2017

$50

Cut & overlock left over carpet to custom size rugs

Plasterer Needed for Cafe

St Peters, New South Wales, Australia

28 Jun 2017

$2,000

Plasterer Needed for Cafe in St Peters in a few weeks. Scope of work required: Suspended Ceiling (Approx. 9.5 SQM) Solid Wall (Hebel Panels) - Approx 16.5 SQM Sheet off cooking line walls, there are indents per the plans, so that also needs to be filled. We also need the structure/framework (solid, so also thinking of hebel) of 2 counters built, if you do this: 2200mm long x 900mm high x 600mm depth 1745mm long x 900mm high x 600mm depth (with cut out on one side, see plans) Happy to meet to get a detailed quote done. Let me know if you have any questions. Thanks Jackie

Clean stain from mattress

St Peters, New South Wales, Australia

27 Feb 2017

$30

Our mattress is in good condition except for a yellow stain. I'll blame our toddler. Please send me a quote to clean it. The stain has been there for a while, over a year.

Experienced Carpenter

St Peters, New South Wales, Australia

24 Aug 2016

$250

Insulation and Cladding of walls

Fix showroom display

St Peters, New South Wales, Australia

5 Aug 2016

$100

I need a skilled carpenter to fix a display unit for rugs in my showroom - it was installed incorrectly by another Airtasker that has gone awol.

Sand and oil my deck

St Peters NSW 2044, Australia

11 Apr 2016

$600

Help. Someone's started working in my deck and left it partially complete. My deck needs to be sanded back clean and oiled. There's approximately 45m2 to be made presentable for sale of the house. There's also upturns to the gardens. It's quality hardwood timber (blackbutt I think). The bench to the bbq is made of the same timber so it will need to be sanded and oiled too.

Replace veranda floorboards

St Peters NSW 2044, Australia

28 Dec 2018

$800

Ist floor balcony terraced house small balcony 1.65 m deep 3m length.. structual bearers good.. floor boards only need replacing. .you will need to supply the materials Would like it completed by 21 january. Earlier is better

Step modification

Saint Peters, NSW, Australia

23 Oct 2018

$60

Cut 10cm off wooden step in kitchen

Panel Beater

Saint Peters NSW, Australia

26 Sep 2018

$120

We have 8 brass pots that have been dented in transit and need to be (gently) beaten back into shape. Open to how you might do that...

Small carpentry tasks

St Peters, New South Wales, Australia

22 Sep 2018

$450

- cut out and replace one piece of timber (that is rotting) in an outdoor wooden window frame (piece is about 2 metres long - doesn't require removal of whole window frame) - replace wooden decorative covers (they cover the metal cups supporting the wooden posts) at the base of three wooden posts that hold up the front verandah (posts are sound but the decorative caps around the base are rotting. - see photos below - I'm travelling overseas from Thursday and if possible would like this done before then. If not, as soon as possible after 17 October.

Build bookcase or bookshelves

Tempe, NSW

12 Jul 2017

$999

I need bookcase or shelves built around 2m wide and 2.3 m high(approx). Job is based in Tempe. Idea is to keep books safe from mould etc. It could be two separate bookcases or 1 single one. We are ready to start the process.

Build framework for stud walls

St Peters, New South Wales, Australia

8 Jun 2017

$600

We have 4 x shower stalls that need to be enclosed with a stud wall. Dimensions are roughly [Content Moderated] We have all the materials as well as the drop saw if you need that too. Framework only required. We can plaster, paint and tile them ourselves. ASAP please.

Deck repair

Saint Peters, NSW, Australia

14 Sep 2016

$60

2 rows of decking have lifted.

Paint Wall, attach hooks to display products.

St Peters, New South Wales, Australia

13 Aug 2016

$100

Hi I need a n handman to paint back of Gyprock Partition measuring approx 30 ft in length x 10 ft in height as well as paint a platform white measuring approx 10 ft x 5 ft. I also need assistance to attach few hooks so that i can display a few producers on this painted partition.

Excellent carpenter to split door & install

St Peters NSW, Australia

17 Jul 2016

$260

I need to split a door, vertically, and hang, including installing door knobs. The door is an entrance to an internal bedroom. Door and door hardware supplied. This describes the process very well. [Content [Content Moderated] /diy-split-doors

Build simple three-panel display

Tempe, NSW

7 Oct 2015

$90

I need a display stand built, but I'm not super-confident in constructing it myself. => Three panels - 1.2 x 1.8m => Narrow wood frame with cross-brace => Black coreflute glued to the front of the frames => Drop-pin hinges installed on the frames, so it can bend and come apart => IF it doesn't stand well on its own, it may need some kind of "feet" My VERY rough drawing of what I'm after is attached. I have all of the timber, coreflute, hinges, liquid nails and the gun for it, sawhorses, circular saw, stanley knife, screws, and various other tools. I don't think you'll need to bring anything unless you prefer working with your stuff. I'd be very surprised if this took more than an hour, and will probably take significantly less.