Find experienced local carpenters in Baulkham Hills

I have attached current photo.. need to upgrade that place.by Removing side unit.. centre the bottom unit.. texture paint the wall.. have floating shelves on both sides, with led strip and tv on the wall

I want someone with a circular or track saw to cut this timber panel I bought from Bunnings. https://www.bunnings.com.au/specrite-2400-x-900-x-33mm-timber-multi-use-pine-panel_p0419614 It is 2.4m (L) x 0.9m (W) x 0.033m (thick). I just need to cut the length down to 1.8m. Happy to travel within the Hills/Parramatta/ Ryde area to have this done.

Looking for someone experienced to restore and refinish my timber front door. The existing varnish is peeling due to sun and rain exposure. The job includes removing old varnish, sanding, and applying a durable, UV- and weather-resistant finish while maintaining the natural timber look. Photos attached.

I am looking for an experienced timber restoration/finishing specialist to restore my timber front entrance. The job consists of: - One timber front door – both interior and exterior sides - One adjoining timber sidelight/side panel – both sides - Timber door frame and surrounding trim Both the door and sidelight contain decorative leadlight glass, so care must be taken when sanding and refinishing around the glass. The exterior timber has become weathered and the existing finish has deteriorated. I would like the entire entrance professionally restored so that the timber looks refreshed and well finished while retaining its natural timber appearance. Work required includes proper cleaning and preparation, sanding back the existing deteriorated finish as necessary, careful hand sanding around mouldings and leadlight glass, addressing minor marks/discolouration where possible, and applying a high-quality exterior-grade UV and weather-resistant clear timber finish. The interior side should also be sanded/prepared and refinished so the whole entrance has a consistent, professionally restored appearance. The Tasker must provide all labour, sanding equipment, tools, masking/protection materials, stain if required, varnish/clear finish and all other materials. Please include in your offer: 1. Your experience restoring timber entrance doors 2. The preparation and sanding process you propose 3. The brand/type of finish you recommend 4. How many coats you will apply 5. Whether your quote includes all materials and any return visits required between coats Photos showing the outside and inside of the same entrance door and sidelight are attached. Location: Baulkham Hills NSW 2153 I am looking for a proper restoration, rather than simply applying another coat over the existing finish.

Sand and stain spotted gum deck approx 50 square metres with 6 stairs deck will be emptied of all furniture

Room divider needed. I have high level levelidea and size in attached photo on what I want. Measurement is not fixed and would love to discuss finalise whats best.

Looking for an experienced carpenter or cabinetmaker for two visits in Norwest. Visit 1 – 4 December: • Carefully remove approximately 4.95m of existing kitchen kickboards before new flooring is installed. Visit 2 – after flooring installation: • Trim the kickboards to suit the new 9mm hybrid flooring. • Reinstall and neatly silicone the kickboards. • Cut and install a timber-look panel to the back of the kitchen island, approximately 1900mm × 830mm. • Cut and install Tasmanian oak feature panelling on a corner wall, approximately 560mm wide × 2400mm high. I will supply both timber panels. Installer to provide suitable adhesive, fixings and silicone. Please include all labour for both visits and examples of similar work.

We have the Yoga wall. Just needs to be installed on wall 210x120 cms

Convert fridge space to cabinet and match existing cabinet doors

Need to remove kitchen cabinet door (both black doors circled) please, usable and recyclable Needing to also remove dining room cabinet in full. This cabinet is in good condition and can be re sold for $$. The dining room cabinet is in three parts (circled) and secured onto the wall.

Wall frame Roof frame Quote it up Supply install

Need 4 standard doors removed, shaved from bottom by 10mm and reinstalled to accommodate new tiles being installed.

Close between house tiled roof and pergola roof and create box gutter framing. Also install additional 100x100 posts @3m on balcony approx 2-3 You supply all framing material for closing between roof and pergola Also add extra battens to ceiling so we can gyprock Id say theres about 16 lineal metres of enclosing to do pergola is like roughly 8 x 5m Photos Attached START FRIDAY

Widen doors, remove lid bearing to open balcony door , dress front porch pillars

Fix parts of deck Fix door

Our kitchen cabinet door has come out. Need it fixed

Task: Carpenter needed to adjust cabinet for oven installation Hi, I’m looking for an experienced carpenter to help modify my kitchen cabinet so I can install a new built-in oven. Details: Oven size: 596mm (W) × 890mm (H) Cabinet opening: 590mm (W) × 920mm (H) The width is about 6mm too small, so a slight side trimming (approx. 1cm) is required to fit the oven The height is slightly larger, so a bottom filler/trim panel is needed to cover the gap and support the oven properly Other info: Electrical connection is already done No wiring work needed — just carpentry work to make the oven fit securely and neatly Looking for someone with the right tools and experience to complete this cleanly. Flexible with timing. Please quote your price and availability. Thanks!

Two-part job to wall mount a floating entertainment unit onto a WPC timber slat feature wall. JOB 1 Cut around 4 x electrical points and recess/mount them into the WPC timber slat feature wall so they sit flush within the wall panel. Refer to supplied photos. JOB 2 Fix a 240cm floating entertainment unit to the wall just above the skirting board so that the unit covers the electrical points for a clean finish. The French cleat (shown in supplied photos) needs to be mounted and fixed through the WPC panels into the gyprock and metal studs behind so the unit can be securely mounted onto it. PLEASE BRING: Drill, stud finder (must penetrate WPC + gyprock), level, 📍 Norwest, Sydney NSW ⏱️ 1-2 hrs total Please only quote if you have experience with feature wall.

Modify the fridge overhead cabinet, increase the fridge space height

Need large pieces of wood cut into 30 cm lengths for fire wood