Hire an affordable Carpenter for any job in Garden Island

Fill a short form and get free quotes from carpenters in minutes

4.5

Excellent rating - 4.5/5 (9200+ reviews)

A range of carpentry for all your needs
  • Cabinet making
  • Custom shelving
  • Wood repair
  • Custom made furniture
  • Deck sanding
  • … or anything else
It only takes 2 minutes. And it’s free.
Up to 50% cheaper than franchise dealers
No job too big or too small
Free insurance coverage
Secure cashless payments
Same day / next day service available

Best rated Carpenters in Garden Island

Felicity Y

Earlwood NSW

(318)

Latest Review

"Great job! all good and on time! she is so smart and experienced in his job. she mounted 2 Mirror cabinets on bathrooms for us."

Verified Badges

Payment Method Verified

Mobile Verified

Facebook Verified

Adam bruce L

Engadine NSW

(47)

Latest Review

"I used Adam and his team to replace a small deck in a unit. The work was done after Adam explained how my specifications could be improved. He also sa..."

Verified Badges

Mobile Verified

Steve K

Coogee NSW

(7)

Latest Review

"Friendly, Professional, Quick Job. Steve will be a helpful man that you really want to get. its always good to understand what the clients standard. ..."

Verified Badges

Commbank Identified Verified

Payment Method Verified

Mobile Verified

Haroon A

Wiley Park NSW

(29)

Latest Review

"Very prompt and professional. "

Verified Badges

Mobile Verified

Mark M

Lilyfield NSW

(31)

Latest Review

"Mark was brilliant. The job has been done perfectly and under difficult conditions. On time, friendly and persistent to the end. Thank you Mark! We..."

Verified Badges

Mobile Verified

Howard M

St James NSW

(307)

Latest Review

"Very fast friendly service Would definitely use again"

Verified Badges

Police Check Verified

Digital iD Verified

Commbank Identified Verified

Trades Insurance Verified

NSW Working with Children Verified

Brett A

Coogee NSW

(30)

Latest Review

"If your looking for quality over price then this is the guy. Focus is on doing a good job and we are hard task masters so he is good!!"

Verified Badges

Digital iD Verified

Mobile Verified

Megan Q

Redfern NSW

(94)

Latest Review

"Very efficient! Would definitely recommend!"

Verified Badges

Digital iD Verified

Commbank Identified Verified

Payment Method Verified

Mobile Verified

Now Available!
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

Recent Carpentry reviews in Garden Island

"An exceptionally hard worker, good at his trade, reliable, and an excellent communicator. Marco got my task done, which wasn't an easy one. Patient, pleasant and will definitely use again. Thanks Marco for achieving such a great result."

CARPENTER & helper to install MDF timber panels

$600

"Great job done quickly and efficiently. "

Sand and stain floor

$200

"Thanks Megan. "

Clean a 30 x 30 cm very recent and damp stain on c

$75

"Motivated and friendly. Would use again "

Build 1 X wall frame

$250

"Great job - fast and reliable.."

Fix bathroom roof panels

$200

"Great service"

Build new buffet

$120

Average reviews for Carpentry Services in Garden Island

based on 12 reviews

5

12
0
0
0
0

What is Airtasker?

1

Post your task

Tell us what you need, it's FREE to post.

2

Review offers

Get offers from trusted Taskers and view profiles.

3

Get it done

Choose the right person for your task and get it done.

Now Available!
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500
Airtasker has over 17 Carpenters in Garden Island, with an average rating of 5.0 stars from 12 reviews. Get in touch with Carpenters such as Felicity Y, Adam bruce L, and Steve K today to get a wide variety of Carpentry jobs done. From Cabinet Making, Custom Shelving, and Kitchen Cabinet Maker; you can get all types of Carpentry done usually between $130-$400, with the median price of Carpentry in Garden Island being $250.
Don't live in Garden Island? We also have Carpenters available in Circular Quay and Beaconsfield available today.

Recent Carpentry tasks in Garden Island

Remove a build in wardrobe

$200

Potts Point NSW, Australia

7th Sep 2020

Remove a Build in wardrobe 195^210 and a small wooden bathroom cabinet and take it away

Cut and Replace decking boards

$100

Sydney NSW, Australia

3rd Aug 2020

Trying to revitalise an outside deck. Need to replace missing piece close to ground. Also close gaps u set stair. Ideally Source matching timber. Measure, cut and Replace the missing pieces before it gets painted next week. Happy to pay for materials on top of budget

Adam did a great job. Good communication and went out of his way to deliver a great result. Thanks

Small carpentry job

$100

Potts Point NSW, Australia

13th Jul 2020

I am moving into a new apartment but the fridge cavity is too low for my fridge and the small cabinet/doors above the cavity needs to be cut down 50mm to fit.

Assistance with and teaching of Model Making

$50

Potts Point NSW, Australia

28th May 2020

Looking to have someone work with me in creating an architectural model. Help with building walls, creating facial, instruction on cutting materials, building structures that can stand up on their own.

I need kitchen cabinet maker / furniture joiner

$400

Potts Point NSW, Australia

5th May 2020

I am looking into getting built a simple bookcase/shelf to be built. Approx 150cm x 40cm x 40cm. Split into 3 sections. Using plywood with white laminate with edges cut. Happy to pay extra for delivery.

Handiperson/Carpenter/Cabinet Maker needed

$300

Potts Point, New South Wales, Australia

9th Apr 2020

Need someone with good carpentry and or cabinet making skills to assist. First task is to swap position of Cot bed and Kallax cube storage unit as opposite of current. The Kallax cube storage unit consists of 2 parts, a [Content Moderated] x 4 cube), and a 77 x 144 unit (4 cube). The 147 x 147 unit needs to be disassembled and customed to add 2 keyboard sliding trays (similar to computer keyboard slide but wider). This can be achieve by using drawer slides and cutting a piece of melamine to fit the width of the unit. 2 drawers are required (one for music keyboard, and the other should fit a computer keyboard). This should be at a height of 70+ cm for each of the drawers. The cube section may need some strengthening for this. The current Drawers and Doors will need to be refitted into the customised structure in different locations (to suit). Finally the 4 cube section will need to be cut down to fit in the smaller space. I expect it will be slightly less then 4 cubes wide.

Cutting stone bench to fit corner

$100

Potts Point NSW, Australia

16th Jan 2020

We need a stone bench cut, to fit an angled corner of our office. Bench size is: 1105mm x 592mm. thickness: 20mm Type: white stone. On the spot $100 cash

Need 10 skirting blocks installed

$500

Potts Point NSW, Australia

27th Aug 2020

Hello Felicity, I am looking to have this job done ASAP as the apartment is being painted Thursday coming (unfortunately the work has to be done on a week day not the weekend). The skirting blocks may vary slightly in length and width due to very slight variations in the original architraves throughout the apartment. All skirting blocks will need to be between 30mm-40mm thick (depending on how deep you insert them into the architraves). The skirting block lengths and widths will have to vary slightly. I have listed the 3 dimensions below; 90mm wide x 140mm high 100mm wide x 160mm high 100mm wide x 140mm high If it is too hard to make different variations in the skirting block sizes then just make them all 100mmW and 160mmH and cut them into place. At the end of the day, I'm not too fussy. I just need some form of skirting block installed. The apartment is not going to be featured in Vogue Living. I just need to neaten it up a little before putting it on the market.

Felicity installed some skirting blocks in my apartment. Her work was so professional and precise. It really made such a massive difference to the overall quality of my renovation. I'm very grateful and couldn't recommend her more highly.

After a carpenter

$1,200

Potts Point NSW, Australia

24th Jul 2020

To build a sliding door/wall To sheet up a very small basement Insert a window Two new doors to go in Bits an pieces At shop in Potts point

Cabinet assembly - with some customisation

$300

Potts Point NSW 2011, Australia

12th Jul 2020

Consisting of the following tasks: 1) supply 16mm white melamine mdf - 3 pieces - 619mm x 386mm - edged all sides (measurements cited are final size including edging) 2) drill dowel holes in the 3 pieces (12 approx per piece) 3) use the customised pieces to finish the assembly of Ikea Kallax unit (147 * 77) 4) assemble a small cube unit using custom pieces (needs drilling etc) - i have some suitable screws - may need more 5) fix the storage units to wood frame (free standing - just to prevent tip over) 6) install 4 x drawer inserts for ikea kallax frame 7) assemble 2 x ikea goodmorgon mirror cabinets (900mmx400mm) and wall mount (brick wall) If you can't supply the melamine pieces, I can source if need be. Need this work done tommorow.

Carpenter/Woodworker to build a custom wall cover

$200

Potts Point NSW, Australia

11th May 2020

I've just moved into a place and hoping to see if there's someone who can cover a corner wall which has existing felt fabric (which cannot be removed). One panel is roughly 2m x 1.5m, and the other is roughly 1.5m x 1.5m (estimated) The idea is to get two white panels which seem like a wall, and on the ends, to hook in to secure them on top of the existing felt.

I need some things delivered from Bunnings

$50

Surry Hills NSW, Australia

12th Apr 2020

Hello ! I would need 12 boxes of cement fibre underlay with the appropriate nails (big box), one box of senso vinyl planking, and some flooring glue from bunnings. See the photos, you would need exactly those ! I’ll pay you back via pay ID PayPal or cash Thank you !

Make a custom Murphy bed using hardware kit

$300

Potts Point, New South Wales, Australia

24th Mar 2020

I need a customised Murphy (wall) bed that is a non standard size to fit in a small space. The hardware kit is shown here: https://www.wallbedbrisbane.com.au/products/diy-wall-bed-kit-wall-bed-brisbane My preference is for Melamine MDF used for this project. I can assist with sourcing the material if necessary, however the person running this project will need to adjust the cutting list to fit the required size. I will need to ensure that the maximum foldout dimension of the bed does not exceed 1950mm (we can confirm this more precisely). I will source a custom sized mattress to fit the smaller bed size. You will need to arrange to assemble the materials onsite. I will also want to install the desk kit. https://www.wallbedbrisbane.com.au/products/alpha-bed-with-desk-wall-bed-brisbane This job will need to be completed over the next 7 days subject to hardware availability which i will confirm.

Cut, sand and deliver 9 mdf shelves

$110

Potts Point NSW, Australia

18th Oct 2020

I need 9 pieces of board (measuring 740mm x 275mm) cut from 9mm mdf, quickly sanded down on the edges to take away any splinters, delivered to Potts Point. The type of MDF I want to use is the following: CustomWood MDF 1200 x 900 x 9mm Standard MDF Panel at 19$ a board from Bunnings - Item no: 0590084. This task includes: - Providing the wood (the cost of materials is included in the price) - Accurately cutting it to size (it needs to fit inside a cabinet) - Sanding down the edges - Delivering to Potts Point. I'm not precious about where the mdf comes from. If you have a spare sheet laying around at home as long as it's the same type of stuff (mdf, 9mm) and in newish shape (not waterdamaged, stained and is reasonably clean) it's good to use. You also don't need to install these boards for me. I am envisioning delivery as meeting you on the street with a trolley, unloading the boards and me quickly going through with a tape measure to make sure it's accurate.

I can't recommend Steve enough. Great communication, speedy and amazing quality of work. Am more than happy to work with him again!

Ardit Floor Leveller - Small Job

$5

Potts Point NSW, Australia

12th Aug 2020

Hi there, I need someone to level a small part of my new apartment. It's only a 15 square metres and I need it to be 10mm thick (so a small job). If you could please send me through a quote or let me know if you are able to do this. (Unsure of what this will cost me so please ignore the $5 - had to write that to be able to post the job.) Thanks, Sophie

Build and install bed platform

$1,500

Potts Point NSW, Australia

16th Jul 2020

Carpenter to build and install bedspace platform with side shelving. Remove old platform.

Cut 16mm off 2 pieces of laminate mdf

$150

Potts Point, New South Wales, Australia

27th Jun 2020

I have had some laminate mdf sheets cut to size, but need 16mm taken off 2 sheets. The sheet length is 70 x 17cm and 41 x 70cm approximately. The cut will be made on the short edge. One is melamine white, and the other is laminate tasmanian oak. Edge banding the cut side is also required if possible. Depending on your skills, I could add additional scope to assemble the unit (its a small cupboard (70x 41 x 17cm). This would include the fitting of the door (Hetich hinges sourced, and holes drilled for hinges, and a handle). You will need to pick up the pieces and do the cuts offsite. Assembly offsite also if you can do this.

Carpenter - Construct an air conditioner cover

$300

Potts Point NSW, Australia

7th May 2020

I would like to find someone who can take a design for an air conditioner cover and make it for me. It is to go on a balcony. I will pay for all materials of course, but you will need to buy them as I have no idea what I would need. I look forward to hearing from you.

Draft, build and install bed space storage frame

$300

Potts Point NSW, Australia

10th Apr 2020

Carpenter needed to design, build (offsite) and install replacement under bed space storage frame.

Re plaster a wall column

$180

Potts Point NSW, Australia

5th Mar 2020

I require a small section about 50x 50 of a wall column to be re plastered and re painted Urgently as understand it takes drying and returning to paint sorry I have no images I work off site. Will pay for product on top but you will need to purchase also understand could take longer and we can negotiate once seeing