Find an experienced plumber in Viewbank

I bought a bosch dishwasher which needs cold water connection as the machine has heating elements in it . however the propert only have hot water connection under the sink. need to install cold water connection under the sink to connect the dishwasher( or convert the current hot water connection to cold water or even convert it to lower the temperature to approx 60 degree with a mixing valve) . Need certified plumber to provide certificate and proper receipt as it’s a rental property. thanks

Licensed Gasfitter Required: Swap Gas Cooktop. I will provide cooktop.

We just purchased a new Bosch dishwasher and need the connection changed from hot to cold, as the old connect was hot. There is a cold that currently runs into the tap - a new fitting with a double head will need to be installed to do this job.

Install Bosch 60cm Series 4 Built Under Stainless Steel Dishwasher SMU4HVS01A.

The hot water flowing out of the water heater is very turbid.

I am having three issues: 1. I heard dripping in my bedroom ceiling 2. Water is dripping on inside of window and a friend said the mortar seemed to be able to be scraped out (ie: possibly wall is issue) 3. Also wonder if another wall is an issue: found puddle inside kitchen and wall seemed wet on inside, with no other discernible cause. house is double brick, 1980s, single story, tile roof Need someone who can potentially assess and fix all three: qualified and insuranced

Require a licensed plumber to attend to fix pipe along front boundary line. Leak source has been identified. Leak is roughly where the yellow arrow points.

Connect bath to plumbing, minimal plumbing involved

We have a 1.23m by 0.45m double bowl sink and drain board. We are looking to get this replaced by a single bowl sink and drain board. I’ve bought the sink with the closest measurements 1.2M by 0.5m. This means the sink falls short by about 3ish cm on the width side and is about 5cm too long on the length side. Looking for someone to help with replacing the sink, as well as figuring out how to make the countertop work with the sink. If possible, see whether a cutout from one side can be stuck on the the other side - failing which a countertop replacement might be needed. Countertop is laminate

Looking for a plumber to swap out our double bowl kitchen sink for a single bowl sink, and install a new pull-out mixer tap. What’s involved: • Remove existing sink + tap • Install new single bowl sink (already purchased) • Install new pull-out mixer tap (already purchased) • Benchtop is laminate • Supply and fit any required pipes/fittings under the sink • Test and make sure everything is working properly, no leaks Measurements: length and width roughly 1.2m by 50cm. The new sink should fit well without any new cutting of the laminate - but there might be some slight adjustments/cutring required. Timing: Ideally before Christmas, but flexible if that’s not doable. Please let me know your availability with your offer. Thanks, Nithiya

Shower base tiles are leaking, looking for a qualified plumber to waterproof, replace the shower base and check all pipes in sub floor

2 shower heads need to he replaced and sealed. kitchen tap is loose and needs fixing. check under sink connections in the kitchen and 2 bathrooms. check valves. cost is for time only and parts will be additional. ill choose a shower head depending on recommendation and connection type. i consider myself a fair and easygoing customer. Im looking for someone easygoing, fair, and knowledgeable. ideally someone local and a solo trader. not wanting a large company. if interested I'm also looking for someone ongoing and possibly on call for other townhouses in our bodycorp. please let me know what other handyman trades you can help with. thanks in advance

Must have current Victorian Plumbing Licence and Victorian Gas Fitting Licence. In kitchen remove old tap spout and fit new supplied tap spout. In bathroom remove old vanity and tap ware and fit new supplied tap ware and pop-up waste. In ensuite: - Fix leaking shower. - remove old hand basin and tap ware and fit new supplied vanity, tap ware and pop-up waste. - Also looking to fit a new Tornado Flush toilet against wall and seek your advice.

In my kitchen sink tap. I want to install two taps. Remove existing ones and install new Taps will be provided only installation required

My kitchen sink is blocked since Sunday. Water is still draining but very slow. I've tried using a planger, unclogging gel and high pressure unbloker but they didn't work.

My house doesn’t have the pressure control or pressure restricting valve in the main water supply. Need to add that.

Two gas igniters at the investment property are not working. Needs fixing. Photos attached.

Hi, I’ve brought 3 new toilets, would like to get someone help to replace those. The photos of the old ones and new one are attached.

Old taps in shower needs to be replaced to new ones (new ones have already been purchased). Old taps in wash basins (4 wash basins) needs to be replaced to new ones (new ones have already been purchased). Old ones are 2 taps this will need to be changed to single taps. You will need to purchase plugs for the gaps in the wash basin. Also please remove Old sealant around wash basin to new ones. Showers - 1 Wash basins - 4

Faucet pops off when turned on. Screw to tighten has rusted in and seals are worn. Need to replace faucet. Please replace. Can either supply a new faucet and you connect or you can supply and install.