Find trusted local electricians in Woolloomooloo

I need the power point moved behind the TV

Electrician Needed in Woolloomooloo 2 hour maximum task, Job Description: Connect a Somfy wind sensor (2-wire connection) to a pre-existing junction box to control awning shutter power. I have all the necessary components and parts. Secure parking available. Requirements: Qualified electrician 2 hours of work Meticulous work habits due to freshly painted apartment Must have own ladder (2m height needed) All work inside

I have a room with one side working in the socket but the other side does not work. The main light does not work either.

1.Remove and replace existing ceiling mounted light fitting in kitchen 2. Remove existing light fitting cover and replace light globe (purchase of light globe not required) 3. Fix oven - oven can display time but cannot be turned on.

I need an electrician to remove this light fitting

need a ring camera and solar panel installed on top varandah.need a ladder for job.

Quick job for an electrician to replace one power point. It has 2 x plugs and 2 x USBs, and only one of the plugs is currently working. Pic attached. Can do anytime today (Wed), Friday morning or Monday next week. Note I don't have the replacement power point so would reimburse for the cost of this separately.

Need electrician to install 10 ikea ceiling lamps and remove 10 existing ceiling lamps. Photo is of the existing light need to be removed. When: This Friday or earlier. Ceiling height: 2.4m Gyprock. New lights link https://www.ikea.com/au/en/p/solklint-ceiling-lamp-brass-grey-clear-glass-00472033/ New lights link https://www.ikea.com/au/en/p/regnskur-ceiling-lamp-white-90520416/

Qualified electrician required for 4 hours. Location Woolloomooloo - Between 10am and 5pm Thursday or Friday this week Good tradesperson required to: 1. Rough in 3 x power cables tails to lugs for roller blinds (existing power cable) 2. Install an inline wifi switch. (existing power cable) **I have all components / parts *Secure parking provided. **Meticulous contractor required - Apartment has been freshly painted and additional care is required. **Require ladder - height 1000mm above ground **No pictures

Need to check why no more power in 2 wall sockets. Possibly to change? 3rd one not always working and may have similar issue.

Licensed Electrician required: (allow 8 hours / Time and materials basis) Single tradesperson required - Thursday 25th July - 9am start 1. Install 3 surface mount lights and an extra switch. (existing cable and ceiling holes) 2. Relocate 3 gpo's (move 1000mm) (gyprock wall) (rough in only) 3. Relocate conduit - 6 metres (external mount swap to internal mount for balcony) (height 1500mm above ground) 4. Rough in 6 x power cables tails to lugs for roller blinds (existing cable) *Access to install is clear and easy. *I will provide surface mount lights, gpo's, switches and power cables tails to lugs **Allow 10 metres of cable *Secure parking provided. **Meticulous contractor required - Apartment has been freshly painted and additional care is required. **Require ladder - height 1500mm above ground **No pictures

The switch for the kitchen fan of the dryer is not working properly, it won’t switch off and the switch needs to be replaced

Studio apartment with internal bedroom gib walls pretty accessible. Keen to see your quotes Description - Relocate all power points to specified locations in entire apartment. - Run and install power for ceiling projector. - Extended T.V. point and double power point to new location in living room - Run and connect power for 3x electric blinds. - Upgrade circuits in sub board to RCBO safety switches 3x 20AMPs RCBOs - Run 20A power circuit from main sub board to kitchen oven. - Supply cut out and install 26x low glare COB down lights cool white colour. (Can potentially supply lights) Site has easy access stairs beside apartment door or service elevator and carpark

Licensed Electrician required: (allow 4 hours max) Tuesday 28th May - 8am start 1. Install 3 additional double gpo. 2 x DBL GPO - (Bedroom Plaster - 4 metre cable required) 1 - DBL GPO - (Kitchen Joinery - 2 metre cable required) 2. Replace fire detector - (Ceiling Plaster - existing cable) 3. Relocate single light switch (Bedroom Plaster - existing cable) *Access to install is clear and easy. *I will provide gpo's / fire detector *Secure parking provided. **Apartment has been freshly painted and additional care is required.

Licensed Electrician required: (3 hours max) Monday 20th May - 11am - 14:00pm 1. Install 3 additional double gpo. 2 x DBL GPO 1 - GPO - Recessed DBL GPO - (replace single GPO with double) 2. Remove / dismantle- 1 - Chandelier Access to install PowerPoints is clear and easy. I will provide gpo's and power cable. Secure parking provided.

Replace old light with a new, more modern fixture (supplied, as shown). - Due date: Flexible

I have an outlet in my kitchen that sparks and trips the breaker if you attempt to plug anything in (it seems to have come away from the wall plate as when you push in the plug there is little resistance). I also want to route ethernet cables through the walls of my apartment from there the router is to 3 different locations. The wall by the router (A) is brick and will need a 3 port wall plate. One of the destination points is also brick (C), one is brick but has an unused phone line wall plate (B) and the final is gyprock (D). Happy to do the power outlet first and quote for the cabling. Thanks! - Due date: Flexible - Due date: Before Saturday, 25 February 2023

Our foxtel port (NBN) is downstairs and the connection is very weak upstairs. Could I have a new one installed upstairs?

Light switch not turning on in the bathroom. - Due date: Needs to be done on Friday, 22 July 2022

We have a few small jobs that need doing: 1. Replace older style existing downlights with newer style LED downlights 2. Install two new LED downlights 3. Put cables behind wall for a wall mounted tv - Due date: Flexible