Find a professional soundproofing service near you

I need my walls soundproofing only one living room wall and 1 bedroom wall

There are 4 alcoves of around 1.2m width and 2.4m in height. For every alcove I will need the 'ReductoClip Independent Wall System' - this has been provided by 'The soundproofing store'.

Build a removable sound-blocking plug that fits tightly inside my window recess. I want to place it at night and remove it easily in the morning using a small pull tab/handle. ⸻ 📐 Dimensions • Window recess (box): Width: 117 cm Height: 118 cm Depth: 5 cm ⸻ 🧱 Materials (layered front to back) 1. Face layer (interior side): • Acoustic foam – 25–50 mm (1–2”) wedge or flat panel • Absorbs sound & creates a tight fit 2. Core panel (for stiffness + blocking): • MDF board (6–9 mm thick) or foamboard • Should be cut to fit snugly inside the recess 3. Optional middle layer (for extra noise blocking): • Mass Loaded Vinyl (MLV) or rockwool (if more depth is available) prefer to avoid rock wool due to price unless you can provide at a cost effective price • Improves sound blocking significantly 4. Back edge treatment (optional but ideal): • Rubber weather-stripping or foam tape around all edges (I have some foam I can use if you deem suitable - see images coming soon • Helps seal against frame and reduce sound leaks 5. Handle: • Small fabric loop, ribbon tab, or drawer pull fixed to center top or side ⸻ 🧰 Notes for Builder • Unit must be lightweight enough to lift in/out daily • Tight fit is essential (±1 mm tolerance) • All components should be glued securely or mounted to a backing board • Foam should face inward (toward room), not glass • If using MLV, sandwich it between MDF and foam • No screws or damage to the window frame — friction fit only ⸻ Looking for a handyman/carpenter to build a removable soundproofing plug for my window. The plug should fit inside the window recess (117cm W × 118cm H × 5cm D), using MDF and acoustic foam (plus vinyl or insulation if needed) to reduce traffic and airplane noise. I want a clean, snug fit and an easy handle or pull tab for daily removal. Materials - please include 2 quotes - one where i provide material and one where you include cost of materials in your quote (and you provide them).

Lift up whole carpet and subfloor, non destructively. Install sound insulating rockwool insulation between joists in floor. Relay dense fibreboard, and install soundproof flooring mat. Relay carpet and underlay. Use soundproofing caulk and products from SoundProofing Store. Roughly 5x6m room only.

Looking for someone to: • Remove internal door & frame • Build a plasterboard wall on one side to close the doorway • Install supplied soundproof panels on the other side (bedroom) Must have experience with plasterboarding

Lift existing floorboards in my upstairs room. Lay acoustic mineral wool between joists. Install the ProSound Reverso SoundMat from The Soundproofing Store. Relay floorboards, and potentially a final surface layer

Our washing machine is rattling and making loud vibrations which is causing annoyance to us and our downstairs neighbours. We need someone to come and pull it out, fit a vibration mat underneath and four feet as pictured. Experience of unplugging and reconnecting washing machines is preferable.

It's a meeting room with tv table and chairs i need some lowered accoustic panels hung from the ceiling. I have the panels but i need someone with the wire and ability to suspend them from the concrete.

Think metal shed 11.3x9.3 ft

We have some soundproof panelling that needs installing on some brick walls in an office building.

Currently, the floors are all covered in laminate. I want this removed and replaced with soundproofing cork, say 8mm thickness, finished with oak/machine oak flooring in the lounge and hallway, with carpet in the two bedrooms. The floors are wooden on wooden joists.

I have two tilt and turn windows and two glass doors (all double glazed) that face a very noisy road. I believe the rubber seals have worn out, and there may also be gaps in the caulking. I am looking for someone experienced in soundproofing to help with properly replacing the seals and reducing noise significantly.

Looking for an experienced and reliable tradesperson to install a soundproofed feature wall in a bedroom on Akerman Road, SW9. The job involves fitting timber battens to a 350cm (W) x 230cm (H) wall, installing 50mm Rockwool insulation between battens, and mounting trimmed Acupanel oak slatted panels with end trims for a clean finish. All main materials (panels, insulation, trims, screws) are supplied. Must have experience with panelling or acoustic installations and your own tools. Optional: assist with LED strip wiring. Start date ideally week of 23rd June. Please get in touch with your availability, quote, and any relevant examples of similar work.

Soundproof living room wall from neighbours. The house is an end terraced so only noise from one side of house. I would start with the living room first and possibly need adding to kitchen and two double bedrooms upstairs in future. Please message me with your method and price. The house was built in around 1890 so I imagine no sound proof installed. Thanks

We are experiencing significant noise leakage from our temple, which is causing complaints from neighbours. Noise Levels: - Inside the mandir: 82–110 dB - Outside on the main road: 60–70 dB - Outside the emergency exit: 70–85 dB - In the lobby (just inside the front door): 80–90 dB Problem Areas: - The fire exit at the back left of the building has a double-glazed emergency door, but a lot of sound leaks from the edges. Pressing the door reduces the noise, so the seal may be poor. - The internal double doors between the lobby and the temple are part wood, part glazed. Sound in the lobby is still very high (80–90 dB). What we need: - An expert to assess and recommend solutions to reduce sound leakage, especially from the emergency exit and the internal double doors. - Possible solutions might include upgrading to acoustic double glazing, improving door seals, or replacing doors with better soundproofed options. What to quote for: - Assessing the current doors and seals. - Recommending and potentially installing new acoustic double-glazed doors or adding secondary glazing. - Improving the seal around the emergency exit door to reduce peripheral sound leakage (e.g., using acoustic caulk, weatherstripping, or upgrading the door) Photos are attached for reference.

My room is directly under my daughters room and since she is leaving school shes up late i can hear every step she tales every sound she makes and id like her floor mainly but possibly walls aswell depending on price soundproofed

I would like a quote for sound proof wall boards need to get equipped and boards for noisy neighbors

Hello, to put a long story short I have noisy neighbours so I want to sound proof my wall and my sisters bedroom wall. I just wanted to know if you can provide a quote of how much it’ll cost including the installation.

Sound proof à back wall I living room . We can hear the neighbours TV loud and any noise he is making

I have purchased a full Noisekillers soundproofing kit for a 2009 Mercedes A-Class (W169). I am looking for someone experienced in car interior work, car audio fitting, or detailing to install the complete kit professionally. The kit includes 18 pre-cut soundproofing panels and 8 self-adhesive pads. Areas to be soundproofed include the bonnet, interior floor under the carpets, boot area including the spare wheel well and boot sides, wheel arch pads accessed via the driver-side wheel arch flap, and interior door panels which will require the removal and refitting of the door cards. Tasks Involved: Lift sections of the interior carpet and trim carefully. Clean surfaces before applying adhesive pads. Fit under-floor and boot mats as specified. Remove and reinstall front door cards to fit the soundproofing pads inside the doors. Apply all adhesive sheets securely and reinstall trim without damaging clips or fittings. A small roller is recommended to apply even pressure on adhesive parts. Ideal Installer: Experience in car audio fitting, car detailing, or van lining. Must have appropriate tools including trim removal tools, screwdrivers, and ideally a small roller. Ability to work neatly and carefully without damaging vehicle trims. Previous experience with Mercedes interiors preferred but not essential. Photos of the car and soundproofing kit are available if needed.