Find a professional local handyman in Ealing

Remove existing & fit 9 internal doors including door furniture

I’m looking for an experienced plumber/heating engineer to carry out full maintenance and cleaning of all radiators in my flat while the building’s communal heating system is currently drained. The flat’s heating circuit should be capable of being isolated from the communal system – this has been done by previous engineers. I would therefore like the engineer to identify and close the appropriate isolation valves before the communal system is refilled. For all radiators, I would like: • Individual flushing/cleaning to remove sludge, magnetite and debris, removing and flushing radiators where appropriate • General inspection for corrosion or leaks • TRVs and lockshield valves checked for correct operation/seizing • Valves, tails, connections and fittings checked and replaced where necessary • Bleed valves/vents checked • Any other sensible preventative maintenance while the system is drained • The flat/radiator circuit appropriately isolated and left safe before the communal system is refilled • Once appropriate, the radiators refilled, vented and checked for leaks and correct operation This is a communal heating system, so I am not requesting a powerflush or chemical treatment of the whole building system. The important requirement is that the necessary isolation and any work requiring the communal system to be empty must be completed before Monday, when the building system is due to be refilled. Please let me know your experience with communal heating systems/radiator maintenance, the flushing method you would use, and your availability before Monday.

I have ordered a gym rack and rubber flooring (to put on top of our flooring to create a home gym. I need help setting this up https://mirafit.co.uk/mirafit-m3-folding-wall-rack.html?gad_source=1&gad_campaignid=24134427009&gbraid=0AAAAADKKnjn8-JWKSbYxrD0lF7UBvXTsI&gclid=CjwKCAjwwL_UBhAjEiwAEhuT5CKIf1rfREgZb66XQPYP728iS2iRwSmqROiOqgOKKy3rFv-RZjgzDBoCLE8QAvD_BwE#446=6784&447=5439

Help putting up 4 medallion mouldings on ceiling and 4 chandeliers however need to be able to work around the fact the chandelier is a bit wide for the moulding so might need an extender or figure out how to sort out. In addition the wiring in critical is old uk wiring while chandelier is new wiring so would need adapters as shown in picture

Our washing machine broke and the replacement compnay said they could not replace it because the water pipe under the kitchen sink is leaking. They were unable to turn the water off and said the valve was difficult to access so we might need someone with some cabinetry knowledge as this is for an integrated washing machine

Fix a new toilet seat please and secure a loose grabrail.

We need a chandelier hung up. But there is nowhere to fix it to. You will need to go into the loft and add some wood on the floor to allow the chandelier to then be fixed to something and hung up.

I need to : 1. put up one Roman blind in one window 2. put up a roller blind in another window 3. remove two metal brackets from an outside wall and make good

Looking for a qualified plumber or handyman to remove my existing kitchen sink and faucet and install new ones. Work required: Uninstall current kitchen sink Uninstall current faucet/tap Install new kitchen sink Install new faucet/tap Ensure everything is properly sealed and tested for leaks Location: Ealing Please message me with your availability, experience, and a quote. Thank you.

Magic corner kitchen cabinet won’t close properly

It seems the belt is broken

The pressure washer seems to have an inbuilt fuse that’s blown as there is no power. I’ve checked the plug fuse.

I will need a screen above the bath, and a frameless shower screen installed, I also need 2 toilet roll holders installed onto tiled walls. One screen is a straightforward/simple screen installation. The second screen/door is more complex and includes a bespoke glass shower door/screen setup with: 8mm toughened glass, 667mm wide x 2100mm high (measurements in pictures) 3 wall-to-glass 90° shower hinges 1 double pull glass door knob (predrilled) Glass-to-wall seal Glass-to-floor seal Pre-cut hinge cut-outs 12mm drilled hole for handle These parts and materials will be supplied by me. The quote should reflect that this is not just two basic screens. One installation is simple, but the second requires accurate fitting of hinges, seals, and handle hardware on a bespoke glass panel. Please only quote if you have experience fitting frameless or semi-frameless glass shower screens/doors.

I think there is a gas leak

I have a new toilet seat but I the fittings didnt work correctly and now it seems a little broken.

I have a fireplace column and back bedroom wall due to be pannelled and need a painter to get them painted after. They will need prep, sanding, application of primer and white paint. I have included photos of rooms as they are now and the AI mock up at the end. Keen to get them done 28th onwards.

Replacing our toilet seat and our old one has completely rusted bolts which would need cutting through before being replaced. Additionally, we are looking to have our TV mounted and some small shelves put-up in the nursery.

I have three Roman blinds need fitting 8 roller blinds need fitting also

Front of house needs a coat of render, 7mx2.7m

Removal of kitchen cupboard and a space made for pipes for new dishwasher