Find a trusted local electrician in North London

New Double sockect to be removed and replaced

We have two lights with wireless bulbs that just need wall mounting evenly each side of our bed and level. One is already mounted but not level so needs taking out remounting. WILL NOT CONSIDER OFFERS OVER £40

Hole drilling in wall to install x2 wall lights not into electrics as it’s for visuals not to be in the wall. Plugs and screws ideally in brass needed. The lights are eye level and ideally a laser measure needed to make sure they’re put evening either side of bed. Job approx 20 mins - flexible on price no more than £40 as I have a budget so please be within reason as it’s a small job:)

I need a registered electrician (in the future for certificates - not now) 1 ) I need to change a switch outside the room into the room on the other side of the door. 2) I need to remove the plug from the scarting box into the wall 3) Remove an alarm box and make all the cables safe.

Install electrical oven , I believe it needs to be wired in.

Need a ring camera put up also needs to be in my budget 100 pounds

I need a floor lamp rewired

Replacement cooker hood and ducting kit purchased. Site of installation in photos below

We need an electrician to reinstall a Zanussi induction hob.

Need ring spotlight camera (rechargeable battery) and solar panel put up on outdoor wall so will need a lader too

Hi, I want to install an electric towel rail. Their is no socket on the opposite wall, so you would need to take power from the corner socket and pull it through, and then drill a hole through the wall to feed the towel rail wire through. The bathroom walls are made of tile, so it would mean having the right bits to do that and to hang the towel rail when finished. There will be some holes made in the bedroom walls from the work, so also if you are able to cover them or recommend someone who can.

Smoke alarm battery needs replacing Alarm is about 3-4M high on a staircase landing - suitable ladder needed

Hi! I Need to replace 2-3 recessed downlight bulbs in the bathroom ceiling, they are motion-sensor activated. It looks like it may be a GU10 fitting, but not 100% sure as it’s fixed into a base. I have a small stepladder available. No rewiring or new installation needed, just a bulb replacement — happy for you to confirm the exact type on site

Garden Shed Build REMOVAL OF CURENT SHED and Tree (see image) - dismantling, removal and disposal of waste of current shed. CONCRETE BASE -roughly 4mx3m (depth around 20cm) CONSTRUCTION OF **PRE-FABRICATED TIMBER SHED** (see image) - instructons provide - 2 days with 2 builders Internal - PIR insulation between the frame - Foil tape to sealed joints - Vapour control layer - Either tongue-and-groove internal cladding - OR Plywood lining, filled, sanded and painted - flooring ELECTRICS - Electricity ran from my home with outlets and lights inside the structure

We have moved into a new home - and the Hisense electric hob does not seem to be connected/ receiving power. It is brand new - so likely a fault in the set up / wiring. Requires electrician to fix - as have tried troubleshooting.

I have moved into my home over 4 years ago and have done many improvements since then which I have surely improved the energy efficiency rating so I want a new certificate and I would also like to upgrade the old electric consumer unit that seems to be very outdated to ensure better safety. Please do send quotes for both EPC cert and Fuse box replacement if you are able to do both - Thanks.

I need someone who is qualified to fit an electric cooker and remove and dispose of the old one properly

The bathroom fan comes on with the light but switches off again after about 2 seconds. I have removed fluff from it but it did not fix the problem. It is a ceiling mounted Vent-Axia fan.

Replace three outdoor sensor lights that have pre fitted cable and replace a bathroom light fixture which is for a small space.

Electrician to install new Electric Cooker