Find a professional local carpenter in Central London

I need a professional to repair a small dining/console table with a high-gloss black lacquer base. There is: • one small chip on the side of the base • two light scratches on another edge The table cannot be moved because it is very heavy, so the repair must be done on-site at the property in Earl’s Court SW5. I need someone experienced with lacquer / French polishing / high-gloss restoration. Please provide your quote (labour + materials) and your availability. Photos can be sent if needed. Thank you.

I need a professional French Polisher or someone experienced with high-gloss/lacquer furniture repair. A section on the side/edge of a high-gloss dining table is damaged and needs refinishing. I can send photos. Details: • I will remove the heavy marble top myself • I only need the damaged wooden part repaired • I can bring the damaged piece to your workshop • Or you can work at my place if needed • Job needs to be done ASAP this week • Please ONLY apply if you have experience with high-gloss lacquer, French polishing, or furniture refinishing • If possible, send photos of similar jobs you’ve done

I have built custom made wardrobes and cabinets to go around and over my bed. I have built cleats for them. I need support to drill the cleats onto the wall, ensuring all cabinets are level and install the cabinets onto them. The finished article should look like the picture but there are only 3 maybe 4 cabinets to install. Two 22cm wide overhead cabinets and one overhead 117cm cabinet

I need someone to block the holes on the floor area under the stairs shown in the photo. The holes need to be covered neatly and the plywood should not be higher than the existing floor I outside of the area or the concrete inside the area. This is just prep work for understairs storage that will be fitted in a few weeks.

I need someone experienced with integrated kitchen appliances to fit and align a wooden cabinet door onto a Bosch SMV2HTX02G dishwasher. The dishwasher is already installed — this task is panel fitting only. What’s required: • Attach the wooden door using the Bosch fixed-door mounting kit • Align it neatly with surrounding cabinets • Check the door opens/closes smoothly and sits flush You should have: • Experience with Bosch/Siemens/Neff integrated appliances • The right tools for accurate alignment • Attention to detail Location: London When: Flexible — anytime this week Budget: Open to offers Send your quote, availability, and any relevant experience.

We want to put up shelves and have a piece of kitchen counter top we need cutting into two pieces. It’s a bit too thick for us to cut ourselves. Thickness roughly 25mm

The fridge unit door from the kitchen cabinets has come off its hinges and needs re-attached.

A carpenter to come to house and assess the specifications required for a wooden library ladder. The wooden library ladder will run from the landing to a mezzanine open attic level. In photo attached, the ladder would sit where the mirror is, and would ideally sit flush against the wall, and pivot out when in use. The carpenter would assess and provide guidance on things like: - The measurements needed of the wooden library ladder - Where the ladder would suitably fit to the wall (i.e. confirming where in the wall will be appropriate to support the ladder) - Any other general advice After completing this, I will order a library ladder to these specifications, and hope the carpenter will be available to come and fit the ladder at a later date.

Remove existing decking area. Clean, prepare and replace with new quality wooden decking. 312cm x 160cm. Please supply high quality decking and materials.

I have two walls in my office and i need you to please install wooden panelling sheets from B&Q - each sheet is 300cm high X 60cm wide. One wall is 5.5m wide and the other wall is 8.5m please see the panels here: https://www.diy.com/departments/new-bigger-size-decorative-wood-slat-wall-panel-in-walnut-3d-slat-acoustic-for-wall-or-ceiling-300cm-x-60cm/5061107400402_BQ.prd

Hi, Would you be interested in restoring this cabinet? We are looking to have the wood repaired, there's some marks and missing chunks aswell as a few splits. We are not looking for a flawless condition, just a decent repair to the major areas. Let me know if its something you are interested in and a rough price or tineframe. If not, can you point me in the right direction? Many thanks

Installing three new wooden blinds to the architrave of a bay window. It requires fitting brackets for the blinds to attach to. This will be easier with an electric screwdriver but I don’t have one unfortunately.

Looking for a carpenter to build small custom shelving unit to fit laundry cupboard, to support stacked washer dryer, with pull out rack in between. Can be made of plywood.

Experienced carpenter required to install 3 bespoke floor-to-ceiling wardrobes and 1 small shelving unit. The job includes carrying materials from the ground floor to the second floor and connecting integrated LED lighting within the wardrobes.

I would like to make a small wooden cabinet which is of 180cm x 40cm x 50cm. The wood has already been cut previously, but the cabinet needs to made with the hinges and everything to be installed. Cabinet needs to be painted as well.

I have a wood pole that needs to be propped up from underneath. Or a piece of wood on the top. I’m looking for a quick temporary solution. Needs to be done by tomorrow 5pm Thanks

Looking for a joiner to install banquette seating in kitchen corner, and remove existing breakfast bar. Also to install shelving in living room alcoves. Small residential project but may be more scope for future projects as I am an interior designer. Please see my profile for further details. Please quote below or contact me. Thank you!

Hi, I am looking for someone who can sand and polish a small patch on my wooden table.

Demolish and completely remove from the property a wooden shed. I can then help clean the concrete base and surrounding area before you construct my new shed. It’s a Keter Darwin resin 6x4 tongue and groove easy fast assembly shed with a floor panel. H:205 x W:119 x D:184.5. Combined weight of the panels = 61 kg. I’d also like some old items from the shed taken away such as a couple of hoses, a large garden parasol, etc. Those are the big items, the others don’t weigh much.

I need 1 extra person to help assemble a wooden 6x4 shed and fit a cat flap on it on the same day.