Find a professional local carpenter in East Sussex

Looking for carpenter with tools who can add two shelves to kitchen island. I can procure the 20mm boards but lack the tools and know-how to do it properly. Butcher block top also needs to be secured.

I’m looking for a carpenter to build around my current bunk bed to create a room divider bunk bed, I have attached pictures of the current bunk bed and inspo pictures.

Two nearby properties in Brighton slash Rottingdean. Ideally, same day if possible 1. Fit four hinged solid oak shutter panels approx 2.1 meters high by 36 centimeters wide. Fitting in front of a glass terrace door, wall is not solid masonry, storage space behind. Existing door handle may clash, so please advise on recessing the shutter or using a lower-profile handle. Prioritize shutters closing flat to block light. 2. Separate small job at nearby property in Rottingdean. Check repair or adjust shed door so it closes and latches properly. Thank you!

The hallway outside my flat is always on and at night the light comes in the flat through the glass of my door. We want to prevent this. The solution would be to cover the glass of the door, by putting there a couple of wood or laminated material with the appropriate measurements so the light can't pass. Not sure if I am explaining myself well sorry... :D

Seeking Carpenter fit carpet on the stairs only one flight please see pics. and install new fence on the back garden gate and also need an electrician todo EICR and resolve heating control issues price negotiable

I need an older 1720 mm kitchen (base only) taken out and bespoke cabinets made (I can wrap) to incorporate drawer units and a dishwasher and small fridge.

Put cardboard box on worktop and this appeared

ripping out built in cabinets (boiler located in one of them so that one will need to stay) and built in desk in a small nook room. we want to turn the small room into a walk in wardrobe, so possibly fitting a couple of rails to the emptied walls if we get rails of the right dimension in time, but if not then just the ripping of a couple of built in cabinets and a desk!

Cutting plywood sheets to size of garage shelving. Putting the cut shelves on the shelving and putting the items back on the shelves. Current shelves are cheap board, so need shelves unloading (boxes and bags) and the old shelves lifting off (not secured just sit on metal frame). I have the cutting tools, bench and 1m metal ruler and pencil for marking the measurements for cutting. Estimating 10mins per board but obviously get quicker after cutting first one as can use as a template to cut the rest. 4-5 hours work to unload shelves, remove, measure mark cut, put on shelves and reload then use my shop vac to clean up the sawdust

Build a coat/shoe rack cupboard in hallway

I need 3 x plywood panels which are braced at the back. These are for paintings. The front painting surface needs to be reasonably smooth.

To change kitchen cabinet pannels (4), 3 corner posts and plinth. They will need to be cut to measure I have started changing the doors, see imagine for items in light green that will need to be changed

I need a cabinet built and help with a shelf that I built. The cabinet I ripped a screw out making the whole bigger so just need help repairing this

Custom built furniture install in camper van it’s an L4 / H3 which had had custom furniture made. Before the furniture installed I need the diesel heater and electrics, plumbing fitted. Furniture not ready until so November so plenty of time for preparation - cost negotiable

1 ) wooden cover to be fitted above the front door of the electric cupboard. This piece of Oak has already been cut to size. You need to remove the attachments from the old cover and attach to the new. 2) Strip of wood to hide cable by the side of front door 3) Bathroom Stay to be fitted around the door (3 sides)of the bathroom in the basement. 4) Gas cupboard door to be fitted. Already cut to size. I have the Oak cut to size but it will need an addition of wood because the box should be about an inch added all around because the water pump sticks out. Wooden oak door to be inserted above the hole in the ceiling, near the gas box. To allow for access to stop cock. 5) Fit oak panel to underside of stairs. Wooden 6) Thin wooden piece to complete the last step at the top of the basement stairs.To hide gap in the floor as well (see photo) 7) Wooden piece of wood at the base of the front door. To hide gap in the floor between the door-step and tiled floor (see photo) 8) Panel of wood to fit on ceiling above entrance to basement stairs.

I’d like to have shelving and a door added to this space to tidy up the area.

Shorten wooden table legs.

I'd like someone to build a metal cabinet for me. Everything is in the box.

Dry rot in the staff toilet wall of Specsavers

Changing bedroom doors, build in closet doors, and room doors.