Find a professional mdf contractor near you

I’ve got a large mdf board that has to be cut on two sides/edges to required size.

Shutter Repair Fix 2 snapped tilt rods and reconnect loose slats (Faux Wood/MDF) I need a handyman or shutter specialist to repair some faux wood / non-solid wood window shutters. The work involves: Repairing/replacing 2 snapped vertical tilt rods. Reinserting 1 slat (louvre) that has fallen out. Reconnecting the other slats back to the tilt rod (the metal pins have disconnected). Please let me know if you already carry shutter repair pins/staples or if I need to order a specific repair kit online before you arrive. Photos of the damage are attached to this post. Thanks!

Install 4 Spacepro Sliding doors on wardrobe, will need to install MDF for tracks, width approx 293cm and height approx 235 cm

I have one MDF board stuck on the ground floor of my building in E3 because it won’t fit in the lift or stairwell. I need someone to come today with a track saw/circular saw and dust extraction, cut it in half that will fit, and help me take them upstairs. THERE IS NO SOCKET IN THE BUILDING TO PLUG IN

Hi, I have a 200cm TV unit that I need professionally shortened to approximately 170cm by removing 15cm from each side. It’s laminated chipboard/MDF. Would you be able to cut and modify this for me neatly like factory finish? https://creativefurniture.uk/shop/tide-crest-gold-tv-unit-200cm/

I’ve got 2 x 2400 × 600 mm acoustic slat wall panel — MDF/wood slats on felt backing. I just need two straight cross-cuts so I end up with three equal panels of approximately 800 × 600 mm, per panel or 6 in total

Hi, I am looking to install a MDF panel 1750mm x 1010mm on a plasterboard wall with studs. This is so I can mount a 65 inch TV safely and securely onto the wall on top of the TV back panel. Would be grateful for any advice and pricing. Thanks

Install skirting through property Coverage 85.1lm

Need tongue and groove mdf panelling installed on one wall which is approx 5.6m long, the panelling would go half way up the wall. Some cutting needed for sockets and to adjust panelling behind a wall mounted TV.

I would like to install MDF boards on my laundry walls- need someone who is able to cut excess off the boards and put them in the correct way on the walls

Install skirting boards to x3 Rooms.

I need to cut an mdf board but I haven’t got a jigsaw, it’s 9mm and in a curve pattern that’s the thing I’m kinda going for

Cut mdf wood and acoustic wall panel. Both are 250x60cm. I want cut to 230x60cm.

I have a cabinet that I want to make look built in by covering th gaps with MDF - I have a large MDF board but unsure how to cut it and don’t have a circular saw

Approx 4 pieces of MDF to cut with circular saw (not provided) and mounting 3 shelves

I need approx 5cm cut off a 30cm long piece of painted MDF panel. Ideally as neatly as possible with a circular saw (I don’t own one of these)

I need someone to help me setup this installation - they are 8.5 panels = 50cmx 175cm x 4mm MDf with a platform of 4mm mdf. They need to come together in shape of a decagon attached onto the platform. I have spoken to a carpenter who said a frame is necessary to hold it together and that it takes about half a day to build and install together . Additionally the frame should also include the frame for a dome which will be stretched with fabric -please see images below for reference

Hi I am after some mdf sheets cut in an arch shape.

Cut mdf panels to size for the wall

6 pieces of mdf wood, all cut the same size