Find a professional internal door contractor in London

I'm looking for someone to fix an internal door that's catching on the frame and won't close properly. I'm not sure whether it needs the hinges adjusting or some material removing from the door itself. It has an MDF facing, so I'm conscious that planing or sanding it down might damage the finish. Looking for someone with carpentry experience who can identify the problem and make the necessary adjustments, leaving a neat finish. Based in N7, Islington. Happy to send photos in advance for a quote. Hopefully a fairly straightforward job but I don't have the tools necessary.

Trim and rehang doors following flooring fitting

I’ve purchased a new door and I would like the door to be installed to the existing door frame and also have a new door handle installed into the door

Supply and fit internal door and remove old one due to safety

Cheap, simple, unpainted, internal fire door to upstairs loft room. Now wont open or close, and is scraping hard against the floor. Hinges are not loose. Please could you make it open and close again (presumably by taking a small portion off the bottom of the door) and then clean up afterwards.

To repair 2 doors inside the house. Doors not closing

2 internal doors need taking down and replacing with new ones New hinges,door handles, latches and screws provided Old frames already have fitting for the hinges and latches. Doors come new so need fitting, attaching handles and hinges in correct places and hanging

2 brand new door installation with handles fitting

Looking for someone to replace and fit 4 internal upstairs doors. Approx existing door sizes: * 76 × 194.5 cm * 76 × 192 cm * 68 × 197 cm * 76 × 196 cm I’m looking at buying Exeter-style internal doors, approx. 32–38mm thick. Most will need some trimming/cutting to fit the existing frames, particularly as this is an older house. Would also need the handles/hinges fitted which I can buy. I attached the photos of the I have attached photos of the wickes door I want to buy and the handles

I need a tradesperson to supply and install a complete replacement bedroom door. This must be a parts + labour job, with you sourcing and purchasing the door and all required hardware. Existing door: * Approx. 834mm wide × 2040mm high * Existing frame stays in place Replacement door: * White internal door * Approx. 2040mm high × 826mm wide × 40mm thick * Six-panel woodgrain design preferred * Hollow-core is fine Work required: * Supply and purchase the new white door * Remove and dispose of existing door * Supply and fit new hinges * Hang, align and trim the new door as required * Supply and fit a new door handle * Supply and fit a mortice sashlock with thumbturn and emergency release mechanism * Lock must allow locking/unlocking from inside with the thumbturn and unlocking from outside with a key * Supply and fit matching latch/strike plate, keys, screws and all required fixings * Cut/recess door and frame as required for the hinges, handle and lock * Ensure door opens, closes, latches and locks correctly Plaster/wall repair: * Wall/plaster immediately next to the door frame and architrave is cracked and damaged, as shown in the photos * Patch, fill and make good the damaged plaster edge * Leave the repaired area solid, neat and ready for painting * Include all materials required for the repair Please quote one all-inclusive price covering: * Door * Hinges * Handle * Mortice sashlock, thumbturn, release mechanism and keys * Latch/strike plate * All fixings * Plaster repair materials * Labour * Old door/waste disposal Budget: £400 all-in. Please state your total price and confirm the door and lock you intend to supply. No new door frame is required.

We need a junior handyman / builder’s help to join our renovations team today to help with finishing touches: painting (touch ups only) and internal doors installation.

Internal door won’t latch shut – strike plate/alignment issue I have an internal bedroom door with a Glutz latch which has suddenly stopped closing properly. The latch itself appears to be working and lines up vertically, but it is not engaging/clicking into the strike plate on the door frame. I believe the strike plate or door alignment needs adjusting slightly, possibly by repositioning the plate, enlarging the opening behind it, or making a minor hinge adjustment. Looking for someone experienced with door furniture/locks to diagnose and fix it neatly, ideally without replacing the existing lock mechanism unless genuinely necessary. Should be a relatively small job. Photos available.

I need 3 internal doors and handles fitted. I have attached the image of the new door and the 3 that will need replacing.

We've had a new uPVC back door fitted and the internal reveals have been left unfinished: exposed brick, old timber and expanding foam on both sides and across the top. Looking for someone to make good all three reveals so they're ready to paint. Scope: • Remove any loose material, trim excess expanding foam • Board the reveals (plasterboard dot-and-dab or bonding coat, whichever suits) with angle beads on the external corners • Skim finish to a smooth, paint-ready surface, neatly meeting the door frame and existing wall • Once dry, run a neat bead of paintable caulk between the plaster and the door frame • Tidy up and take away all waste Please bring all materials and tools. Painting not required. Standard single door, reveals roughly 10cm deep. Location: Purley, CR8. Please include your price and availability, and let me know if you've done similar work.

1930s house with original internal doors that will be kept. Hardware has been painted over multiple times so screw heads will likely need scoring out with a blade or knife before they’ll turn — not just a straightforward unscrew. Please bring a multi-tool/utility knife for this. Doors to be kept intact Replace hinges on 9 doors (7 heavily painted) I have the replacements Remove and reinstall 3 heavily painted latch plates Remove and reinstall 2 heavily painted forend

Inspect faulty door latch and either fix it or advise if a new latch is needed and then replace once the new part has arrived

internal door fitted to a new door

I need one internal door shortening. I got a new carpet recently and the door no longer clears the floor. It just needs a slight trim. The door has been removed so would want it then putting back on the hinges.

A small job for an experienced carpenter/joiner to hang a new internal door. The door has already been planed to size and fits the opening, so won’t need any resizing or trimming. I just need someone to: * Fit and recess the hinges into the door and frame. * Hang the door so it is straight, flush and operates smoothly with even gaps. * Fit a pull handle to the door (pull handle only – no latch or lock mechanism). The frame is already in place, and the door is ready to be hung. I’ve attached a photo of the opening. Tools: * I have tools available, including a planer and chisels. * Ideally, you’ll bring your own professional tools. Parking: * I’ll cover the cost of parking. Looking for: * Someone with experience hanging internal doors. * Attention to detail – I’d like the door aligned properly with clean hinge recesses and a good finish. Please let me know your experience and, if possible, include photos of similar carpentry work you’ve completed.

Hi all! I have a door, unsure wether it is the right size so will need to maybe be cut down. I have hinges and the handle needed.