Find experienced local tradies in Bondi Junction

Trade Plasterer required to work with Builder and labour. We will be gluing gyprock directly to rendered walls in a large apartment in Bondi. Also installing sheeting to ceilings in lounge room and bathroom. Must be good at setting work and installing cornice. Complete walk up start everything provided including sheeting glue cornice panel lift so all you need to do is basically set joints cut and install cornice. A labourer will be provided at your disposal. You will be contracted for a period of about 3 to 4 weeks coming and going as each area is being prepared. You’ll be paid on a weekly basis. Only trade plasterers need apply please no handyman.

• Prep: Scrape back peeling pain B-I-N/Peel Stop (Essential for lime wash base). • Bedroom 1: Prep and patch walls. • Bedroom 2: Prep and patch AC hole; install Gyprock to ceiling (over-board). • Stairwell: Install Gyprock to ceiling (over-board); scrape/patch walls. • Front Living Room: Patch ceiling crack; repair drummy/cracked wall near fireplace. Details: • House Type: Old terrace with lime wash/set-coat issues. • Materials: Budget includes all materials (Zinsser, Gyprock, base coat). • Finish: All surfaces to be sanded and paint-ready. • Budget: $2600 (Total Supply & Install). Happy to get paint quote- walls only. Edit- 1 ceiling that is gyprock needs tape where it’s cracking.

Need to make 2 main holes 450x450 in gyprock roof

Cement render small areas of wall near front gate.

Hi, I’m looking for a carpenter to replace a beam on my front awning. The current beam has rotted and broken off from its original position on one side, causing the awning to lean.

Hi guys, we need an internal demo / strip-out at our shop. Please only offer if you can do everything below and leave the site clean. Scope (all included): Demolish and remove 2 non-structural gyprock walls, including timber studs/frame inside Remove all rubbish off-site (gyprock + timber + fixings) — tip fees included Leave the area completely clean (sweep + vacuum) — floor must be spotless, and be careful with the ceiling. Wall sizes: Wall 1: 3.9m W x 3.0m H Wall 2: 2.55m W x 3.0m H Timing: High urgency — tonight (after-hours) is ideal, otherwise ASAP. Requirements: Experience with internal demo/gyprock removal Bring your own tools + protection (drop sheets, dust control, etc.) Must be able to handle disposal + cleanup ---- There is a timber workshop floor/platform we’re removing as part of opening up the showroom. We need the timber to be cut back in a straight line (even/flush edge) so it looks neat and is ready for finishing. After the cut, we need a small ramp/transition installed along the edge to eliminate any trip hazard (safe, tidy, durable). The ramp/transition should be securely fixed and suitable for a retail environment (people walking through all day). Timber workshop floor cut + safe finish We have a timber floor section that needs to be cut straight / even (flush finish) to suit the new open showroom layout Install a small ramp / transition strip to avoid trip hazards (safe, neat finish) Prefer insured (public liability) / professional When offering, please confirm: You understand this is all-inclusive fixed price (demo + disposal + full clean) You can do it after-hours if needed Photos attached.

Hi, need a licensed tradesperson (plasterer or passive fire specialist) for a small but compliance-critical ceiling repair in my top-floor (3rd storey) strata unit in Bondi Junction, NSW. Job details: • Patch and fireproof a single 150 mm hole in a double-layer Gyprock fire-rated ceiling. It’s to cover a hole made for range hood ductwork that is going to be removed. • Access via manhole to roof cavity from inside unit (no external roof access needed). • Must restore full fire-resistance level (FRL) per Australian Standards (AS 1530.4/NCC) using tested passive fire system + matching plasterboard reinstatement on underside. • Include photos, product data sheets, and compliance statement for strata AFSS. • No cosmetic finish required (just functional patch); I’ll paint later. Requirements: • Experience with strata fire-rated repairs (double Gyprock ceilings). • Provide tested system detail for this penetration size. • Public liability insurance + relevant certifications. Budget: (open to quotes based on method). Please reply with your experience, proposed approach, and fixed price quote.

I’m looking for an experienced renderer or handyman with acrylic render experience to repair a small cavity in an exterior rendered wall next to a doorbell. Important notes (please read): This is a rendered masonry wall, not plasterboard Plaster or gyprock compounds must NOT be used Repair must be done using acrylic (polymer-modified) render and blended to match the existing texture Scope of work: Tidy and secure existing low-voltage doorbell wiring Install backing support inside the cavity if required Patch and repair the hole using acrylic render Texture-match surrounding render Prepare surface for paint (no painting required) Reattach doorbell if required Details: Small repair (roughly doorbell-sized – see photo) Exterior wall No major electrical work required Doorbell can be temporarily removed and re-mounted after repair (please confirm if you include re-mounting) Please let me know: Your experience with acrylic render repairs Examples of similar work (if available) Availability and estimated time on site

Wall mount TV. Gyprock and need appropriate bracket.

I need 2 guys for a day to direct stick, base coat, top coat on brick and around a beam which will have timber blocks in it. Also, install cornice and patch a few walls around a new staircase. Cornice and sheets supplied. Glue, base coat, top coat to be supplied by you. Please allow for sanding once dry

We have already done a base paint to the wall but I want it to look “rendered”. I’ve attached a photo of what I want it to look like. The photo is also attached of what it currently looks like.

I need a gyprocker and painter to complete patch works. Materials needed will be gyprock, sanding materials/equipment and paint. I need this done asap happy to work out a rate to complete works. Thank you Youssuf

Prepare for 2 skylights in roof frame and frame lightwell opening including floor frame adjustments as needed, gyprock, sand and paint. Roofer will separately perform the installation into the tiled roof itself due to the roof being on 2nd floor (Ground + 2) Skylight sizes Velux C01 570x780 Velux M08 1400x780

Looking for a plasterer to replace a section of water damaged gyprock in a kitchen.

Hi there, I need a new balustrade - five metres roughly, in lovely timber, it's all on the upstairs landing, not up the stairs. I'm looking for a rough idea how much it costs, before I commit to it, so I've put 10 dollars on the next page

Wall repair - Gyprock hole fix

Need ceilings and walls setting

I’ve got a wall in my house with some glass panels. We’d like to remove the glass panels and replace them with gyprock. It’s roughly 3m long.

I had an Aircondition unit replaced and need to sheet the cut out section again and patch and sand. I will do the painting myself. Free parking and easy access. I need this done urgently! Phones are attached.

Title: Carpenter/Handyperson to Rebuild Built-In Wardrobes (2 Bedrooms) Description: Looking for an experienced carpenter or skilled handyperson to rebuild the interiors of two built-in wardrobes in my home (Bondi area). Scope of work includes: • Removing and disposing of existing internal fittings. • Designing and building new internal structures for two wardrobes. • Installing hanging rails for clothes, shelves for folded items, and shoe storage sections. • Ensuring everything is securely fitted and has a clean, finished look. Details: • Materials to be included in your quote. Happy to pay $1000 for labour then additional for materials. • Measurements can be provided, or you’re welcome to visit to quote. • Must have own tools and experience with similar wardrobe fit-outs. • Ideally looking for someone who can complete the job within the next 1–2 weeks. Location: Bondi 2026 Budget: Please quote (open to offers)