Find an experienced handyman in Ultimo

Looking for a handy person or cabinet maker to do two small kitchen repairs in Ultimo, Sydney. Photos attached. 1. Under-sink cabinet door hinge pulled out The concealed (Euro-style) hinge on the under-sink cabinet door has torn out of the cabinet side panel. The screw holes in the particleboard are stripped and chipped, so the hinge mounting plate can’t be screwed back into the same spot. The door is now hanging loose. The bottom of the door also has a cracked hinge-cup hole, so please check that too. This needs a solid, lasting fix, for example filling and re-drilling the holes, using dowels or a hinge repair plate, or moving the mounting plate to fresh material. Then the door needs to be rehung and adjusted so it closes flush and lines up with the doors next to it. 2. Kitchen drawer not closing fully The top drawer under the benchtop (Harn drawer system, white gloss handleless front) won’t close all the way and sits slightly out from the cabinet. The spring mechanism in one might be damaged or need to be reattached (see photo). Please diagnose the cause, then repair, adjust or replace the runner(s) so the drawer closes fully and smoothly. What I’d like: Both jobs done in one visit Please bring the tools and any parts you need (repair plates, dowels, filler, screws, and a replacement runner if one is needed), or let me know if a part has to be ordered When you make an offer, please say how you’d fix the hinge and whether your price includes parts When: Flexible, ideally within the next week or so

Need to remove old kitchen sink and install new one. And replace kitchen tap

Need blinds installed old ones removed

Description: Hi, I need a handyman to supply and install a wardrobe hanging rod in my apartment in Ultimo. Job details: Wardrobe rod has broken off/pulled away from brackets Rod length required: 177.5cm Location: Built-in wardrobe, internal wall Need supply + installation of a suitable rod and brackets Must be securely fixed so it can hold a full load of clothes without pulling out Preference for oval chrome or stainless steel rod with matching brackets What I'll provide: Access to the apartment Existing wardrobe space is ready to go What I need you to bring: Replacement rod (approx 177–180cm, can cut to size) Brackets x2 (plus a centre support bracket recommended) Appropriate wall anchors/plugs for the panel material Drill and tools Takes around 30–45 minutes.

Title: Install 2 x Ramset DynaBolt Hooks into Brick Wall (Garage) Description: I need someone to install 2 x Ramset DynaBolt hooks into the brick walls of my garage at Ultimo NSW 2007. The job: Install 1 x DynaBolt hook into each side wall of the garage (one per wall, opposite ends) Hooks will be used to hang a golf practice net across the width of the garage Hooks need to be installed at the same height on each wall (approximately 2–2.2m high) The garage walls are brick/masonry What I'll supply: 2 x Ramset DynaBolt Hook anchors (8mm x 45mm) — already purchased What you'll need to bring: Hammer drill 8mm masonry drill bit Basic tools to complete the installation Location: Ultimo NSW 2007 Ideal tasker: Someone with experience in masonry/brick fixing — handyman, tradie or similar. Should take no more than 30 minutes.

I have a living room and bedroom that I’d like curtains installed for. I have the rod, curtains, groove end, and wall/ceiling mount. It may require concrete drilling and/or drywall drilling. The rods will just need to be cut too (they are from spotlight and are simple cuttable rods, I assume with a saw).

Hi, need a quote to supply and install toilet seat cover at NSW 2007 Ultimo. The toilet make is NEWPORT FOWLER.

Task Description Available 24/7 to complete: Looking for someone experienced with rubber gym flooring to tidy up and properly fit the existing flooring in a storage/training area. The rubber flooring is already onsite, and we also have extra flooring available if required. No flooring supply is needed — labour/service only. Scope of work: * Cut existing/extra rubber flooring to fit the room, walls, columns and edges neatly. * Rearrange and align the rubber tiles/mats so they sit square, tight and flush. * Minimise gaps between flooring sections. * Ensure edges are properly fitted to reduce movement, shifting or separation during use. * Use existing spare flooring to fill the currently exposed sections where possible. * Leave the finished area neat, level and professionally aligned. * Clean up/offcuts after completion.

Kitchen sink and tap installation plus remove bathroom vanity and connect new basin and tap.

Repair dents on plasterboard, about 3-5cm wide

Looking for an experienced renovator/builder/handyman to review two bedrooms (partition between rooms made of PVC) and advise on best sound-proofing options. Currently lots of echo/able to hear from the other room. Will likely need to have existing partition (PVC frame) completely removed -Demolition. Existing PVC wall system (approximately 7.5 lm × 2.6 m high). Includes two existing doors and jambs. Then, construct new 70 × 45 timber stud wall. Install acoustic foam gaskets to top and bottom plates. Supply and install acoustic insulation. Sheet both sides with SoundCheck plasterboard. Set all joints ready for painting. Supply and install two timber door jambs. Supply and install two solid core doors. Install hardware and door handles/entrance sets. Install architraves and complete trim throughout. Then Painting. Need to account for electrical relocation.

Looking for an experienced renovator/builder/handyman to review two bedrooms (partition between rooms made of PVC) and advise on best sound-proofing options. Currently lots of echo/able to hear from the other room

Broken bedroom door - see photos. Need to fix door and install a new door lock - entrance set. Door made of PVC material (not timber/primed MDF). Will likely need a reinforcement plate around chipped area to hold the new door handle in place securely. Alternatively, a PVC part to be moulded for reinforcement. Location - Ultimo NSW 2007. Parking can be arranged. Flexible timing.

Sand and Paint Timber Deck and both privacy screens in courtyard . Deck to be painted a light grey colour and privacy screen a beige crème colour . Privacy Screen approx 2m high. For courtyard dimensions see photos attached .

Need a handyman to quote and complete the following: -Replace the cabinet/panel enclosing the toilet cistern (behind and above the toilet) as it is water damaged. See attached photo. -Repair a minor scratch on a timber floorboard. -Install a shower curtain and rail. -Remove 10x child safety hooks from cabinets without causing damage.

First, my kitchen sink is blocked. I unscrewed the pipes under the sink, but found nothing. Second,the old water tape in the balcony needs a new one. Third, the cold water tape in the laundry is dripping

Need help supplying and installing a replacement for this door knob. Must be same/similar Please quote

Toilet door handle broken. Only opens from outside not inside. Come fix it or replace with new one whichever is easier or cheaper.

I need a solid wood door installed in the bathroom. You would first need to remove the existing door "see photo attached". No painting required. Don't tell me that the price of the door has to be reimbursed, include the whole price in your offer The dimensions are: 72.5cm wide 206cm long

Installation of 5 heavy whiteboards to meeting rooms. Loading dock access and 2 x men needed due to weight of the boards. Would ideally like this completed within 2 hours.