Find an experienced handyman in Randwick

Title: Repair and resecure vertical blind track I need someone experienced with installing or repairing vertical blinds to ceiling inspect and securely refit. The track appears to have come loose from its mounting brackets or fixings and is sitting lower than it should. The job involves: Inspecting the existing brackets and mounting points. Replacing any loose or damaged screws, wall plugs or brackets if necessary. Securely refitting and aligning the existing blind track. Please bring your own tools, ladder and suitable fixings. Budget: $80, negotiable depending on the repair required.

We have a new remote for fan (old one not working) and need new receiver connected to the fan (requires connecting motor and power wires) - ceiling is high. Requires a ladder

We need to lay one extra brick on our garden bed in our courtyard and render both the balcony and garden bed. We will supply the render and bricks

Install a couple of wall-mounted brackets for my resistance bands (brick/concrete wall)

I need help with a few furniture jobs and a TV install. Please read the whole list before quoting. 1. Dismantle a King Living Promenade king storage bed and move it to the garage - Take apart a King Living Promenade king-size gas-lift storage bed and carry it down one flight of stairs to the garage. - Instructions: [King Living Promenade assembly manual (PDF)](https://www.kingliving.com/media/assembly-manuals/Promenade-Soft-Assembly.pdf). To dismantle, follow the steps in reverse. - The lift mechanism is under tension. Before moving it, please re-engage the transport securing bolt on the lever arm (steps 17–18 in the manual). - The manual says two people are needed. 2. Move a toddler floor bed and mattress - Little Lifely toddler floor bed, with its mattress, moved out of a bedroom. No dismantling needed. 3. Move and assemble an IKEA MALM double bed - Bring the MALM double bed frame up from the garage (one flight of stairs) and assemble it in the second bedroom. - Instructions: [IKEA MALM bed frame, high, Double – assembly instructions are under "Product details" on this page](https://www.ikea.com/au/en/p/malm-bed-frame-high-w-2-storage-boxes-white-s59175960/) 4. Wall-mount a TV - TV: Sony 32" BRAVIA W830K (model KD-32W830K). [Sony manuals and wall-mount info](https://www.sony.com.au/electronics/support/televisions-projectors-lcd-tvs-android-/kd-32w830k/manuals) - Mount: XCD Full Motion TV Wall Mount, Small to Medium (15"–55") V2, model XCD09068. I already have it. [Product page](https://jbhifi.com.au/products/xcd-full-motion-tv-wall-mount-small-to-medium-15-55-v2) - Please bring a stud finder, drill and the right wall anchors. The wall is brick. **Supplies:** Please stop at Bunnings on the way and pick up furniture wrapping supplies. That means moving blankets, stretch wrap and packing tape. I'll reimburse you on receipt, on top of the agreed price.

Looking for someone to make and install 8 custom fly screens to match the existing ones on our building (photos attached). They need slim aluminium frames in the same dark green as the window frames, with dark mesh. The screens: 2 bedrooms (first floor): one double window each, 2 screens per window at roughly 650 x 500mm (4 screens), fitted outside the window like the existing ones Kitchen: 1 screen, roughly 880 x 570mm, outside the window Living room: 1 screen, roughly 1050 x 900mm, outside the window Bathroom (first floor): 2 small windows, roughly 920 x 440mm each. These open outwards, so the screens need to be face-mounted on the brickwork outside the window frame and will be a bit bigger than the windows. Measurements are approximate, so you’ll need to measure on site before making them. Must-haves: Finished by Friday 13 November Colour match to the existing green Very low impact: minimal, neat fixings, no damage to brickwork, paint or frames, and a tidy site afterwards You’ll need a large ladder or other access for the first-floor windows Please only make an offer if you can do the whole job (make and install) by the 13th. Happy to send more photos or have you come and measure first.

Small window fly screen with torn mesh needs re-meshing, approx. 40 x 40 cm. Second storey apartment near the Prince of Wales Hospital. Please bring replacement mesh and spline, or include the cost of supplying them in your quote. Needs a neat finish to match the other screens as it’s for an end-of-lease inspection. Flexible on days. Photos attached.

I’m looking for an experienced carpenter or door installer to supply and install a new front entrance door for our house. We want the new door to look almost exactly the same as the existing door, including the baby blue colour, classic design, raised decorative panels and framed contours. However, we would like the decorative panels to be slightly narrower to provide sufficient space for installing a smart lock in the future. The existing fixed glass sidelights on both sides of the entrance are to remain unchanged. Existing door dimensions: Width: 1,020 mm Height: 2,300 mm Thickness: 40 mm (excluding raised decorative panels) Scope of work: Supply a custom-made door matching the existing door's design, colour and overall appearance. Modify the width of the decorative panels as necessary to allow sufficient space for a future smart lock installation. Ensure the door is suitable for external use and compatible with the existing doorway. Remove the existing door and install the new door, including any necessary fitting and adjustments. Reuse or supply suitable hinges and other hardware as required. Ensure the door opens and closes smoothly and fits properly. Remove and dispose of the old door and installation waste. Please refer to the attached photo of the existing door when preparing your quote. The priority is to maintain the same overall appearance while making the necessary design adjustment for a future smart lock. Please provide an all-inclusive quote covering the door supply, custom manufacturing, installation, hardware and disposal. If any additional work is required, please specify it separately. Ideally, I’m looking for someone with experience in custom external doors and decorative panel designs. Thank you!

Looking for someone to move our existing door hinges so the door swings out, instead of in. It will require a new frame on the inside of the door jam to support the door swinging outwards now. Existing door latch also needs fixing as door currently swings open. Would like to keep existing handle if possible. Please include all materials and labour in your price.

Measure, build and install fly screen for doorway. Existing alu frame in place to set tracks to Size roughly 1.4 x 2 Does not need to be fancy.

Repair internal timber sliding bathroom door

I need three areas of wall damage repaired, patched and repainted to match. Garage wall. The wall has been dented and cracked at bumper height, just above the stone kerb. The area is roughly 1 m wide by 0.5 m high, with two main vertical cracks, some hairline cracking and a slight crease where the board has been pushed in. It may need a section of board replaced rather than a patch. Garage wall, second area. Similar damage to the above. Bedroom wall. A hole that needs patching.

Install 2x Ceiling Fan + Light Combos Looking for a licensed electrician to install 2x ceiling fan/light combos. - Both are replacing existing ceiling light fittings - Existing light sockets/wiring already in place - Fans have remote controls - No new wiring or switch installation expected - Standard residential ceiling, approx. 2.8m high - Need fans securely mounted and balanced - Remove/dispose of existing light fittings - Test both fans, lights and remotes after installation Please quote for labour/installation only. Fans will be supplied. Ideally looking for someone experienced with ceiling fan installations and available soon.

Mirror installation + wall repair I’m looking for someone experienced in wall mounting and minor wall repairs to: * Remove 4 existing screws and their wall anchors/plugs from my wall. * Fill and smooth over the 4 old holes so they’re no longer visible. * Install new appropriate wall anchors/screws in the correct position. * Securely affix a new mirror to the wall. * Ensure the mirror is level and safely mounted. The wall is in my apartment in Randwick. Photo of the mirror attached and some of the screws that need removing from my wall. Looking for someone experienced who can bring the appropriate tools and fixings for the job.

I need help installing a glass whiteboard (7kg) onto a wall in my home. You will need to bring your own tools but plugs etc have been provided in the package.

1/ install 3 x floating shelves into brick wall 2/ drill small hole in cabinet for TV chords 3/ hang 7kg framed artwork above fireplace 4/ paint a few areas: 4 x wall patches, 1 x door and 1 x step

The basement door is old & solid so just need the old stop and jam (hinge post?) replaced with a solid beam and installed as its got signs of rot and the doors out of plumb. Also need a new cylinder for the existing lock and 2 keys to suit. Hit me with a quote. More photos coming Monday.

Shower door is leaking. Needs a new strip on the bottom.

Need someone practical and has plumbing skills to fix some things round the house

A number of jobs required in a small allied health clinic: * Mount 1 large mirror (assistance available) * Mount 2 shelves * Install 2 coat hooks * Install 1 disability grab rail in bathroom * Mount acrylic wall sign * Drill cable access hole in reception desk (hole saw can be supplied) - see pics for reference