Find an experienced handyman in Inner West Sydney

I can supply hinges and door handles, two doors, double rebate door jamb for external - need an internal sliding door frame and door installed 770mm x 2040mm x 35mm standrard hume frame and hollow door - need a double rebate external door and external back door 820 x 2040mmx40mm Both in the same area.

Hi there, I’m looking for a handyman/builder to build a gyprock partition wall to divide a large room and create a smaller room. The wall will be approximately 3570 mm long and 3500 mm high. Please let me know if you’re interested and available. Thanks.

install Hills Everyday Double Fold Down Clothesline on side wall of house (brick)

Fix with a new gyprock after removing damaged section. I will sand and paint

gyprock plasterboard or villaboard. Seal old chimney hole. Photos attached . Handyman. Carpenter. . Burwood. . Please note only need to seal the triangle shape hole. Not the whole wall. .

Garage door is stuck and cannot close. It appears that the cable on one side has come off the pulley and has become tangled around the pulley mechanism. The other side appears to be intact. Looking for someone experienced with garage door repairs to inspect and repair/reinstall the cable and make sure the door is properly balanced and operating safely. Photos attached showing the problem. Located in Haberfield. Ideally looking for someone who can attend today.

We are after someone who can install 4 picture frames in our office and also adjust the height of a TV that has been installed in one of our meeting rooms as it currently sits too high.

Hi there, I am looking for a reliable handyperson or plumber to replace a toilet seat at my property in Strathfield, NSW. The Current Issue: The existing toilet seat was installed incorrectly by a previous party, leaving a noticeable gap between the seat and the ceramic bowl (you can see this gap clearly in the attached image_4.png). The soft-closing mechanism on the current seat is no longer functioning. The toilet is a back-to-wall/concealed cistern setup, meaning the seat likely utilizes top-fixing (blind hole) hardware rather than standard bottom access. What I Have: I have already purchased the replacement seat: a brand new AXA Uno MKII Soft Close Quick Release Toilet Seat. The new seat is still in its packaging with all the provided mounting hardware and instructions (as shown in image.png, image_2.png, image_3.png, and image_5.png). The Task: Carefully remove the old, incorrectly installed seat and its hardware. Install the new AXA Uno MKII toilet seat using the new hardware provided. Ensure the new seat is adjusted correctly so it sits completely flush against the toilet pan with zero gaps. Verify that the soft-close and quick-release mechanisms are functioning perfectly before finishing. Location: Strathfield, NSW Tools: I have the new seat and its included fixing kit, but you will need to bring your own hand tools to remove the old seat and tighten the new mounts. Please let me know your availability and quote for the job. Thanks!

Someone to supply and fit Small dog door into wood door

Remove old toilet seat and install new one

I need an experienced gym equipment installer to assemble the following in my basement home gym: Verve Tori Functional Trainer Rack (main job). Dual weight stack functional trainer with power rack. Reference: https://www.vervefitness.com.au/products/tori-functional-trainer-power-rack Verve Smith Machine attachment for the rack Verve No Gap Adjustable Bench plus leg attachment Cable attachments fitted and cables tested (lat bar, low row foot plate, lat pulldown seat, handles) 2-tier Olympic plate rack and 2-tier dumbbell rack (small flat-pack jobs, boxes on site now) Site details: Basement location, ground-level access. The the boxes will be located in the room, so there won't be a need to move them. Ceiling height approx 2.35m, confirmed compatible with the rack Concrete floor with rubber tiles. The Tori must be anchored with the supplied dynabolts, so you'll need a hammer drill and masonry bits All boxes on site, unopened Requirements (non-negotiable): You must have assembled a Verve Tori Functional Trainer or an equivalent cable/weight stack functional trainer before. Attach a photo of a previous install with your offer. Offers without a photo will not be considered Own tools including hammer drill Cables routed correctly, weight stacks tested through full range, all bolts torqued, rack anchored and checked for level before sign-off Packaging broken down and stacked for removal Flexible on date. Verve equipment arrives Friday 07/08

Fix inner frame of sliding door which has come loose

Toilet seat hinge has broken - have purchased new parts, just need someone to remove old hinges and re-attach the seat with the new hinges

A range of different tasks around the house picking up and installing IKEA cupboard doors, resetting a shelf that has slipped, picking up tapeware and fixing. Proposing an hourly rate. Can be completed in parts over the week.

Looking for someone to help reseal one small section of silicone around a bathroom door frame where there is a minor gap. Just needs to be cleaned and resealed neatly with bathroom-grade silicone. It’s a small and straightforward job.

Hi, I’m a builder looking for a licensed plumber to install a new kitchen sink in Ashfield today. The job includes: * Install the kitchen sink. * Connect hot and cold water. * Connect the drain/waste pipe. * Check for leaks and make sure everything is working properly. * Advise if any additional fittings or parts are required. * I can purchase any required materials from Bunnings if you let me know what is needed. Requirements: * Licensed plumber only. * Own tools. * Honest, reliable and reasonably priced. * Available today. Please send: * Your price. * What time you can come. * Confirmation that you are a licensed plumber. Photos attached.

I’m looking for someone to repair a chain-operated roller blind in a bedroom. The blind no longer stops at intermediate heights. It will only stay either fully up or fully down, which I believe may be due to a faulty clutch or internal mechanism. I’m looking for someone who: * Has experience repairing roller blinds. * Can diagnose the issue. * Can replace the clutch/mechanism if required (please advise if parts are needed). The blind and chain are otherwise intact and in good condition

I need the damaged mesh replaced on one existing sliding flyscreen door. I will supply a new roll of Cyclone pet mesh. This task is for labour and installation only. * remove the existing damaged mesh and spline; * cut and install the supplied pet mesh neatly; * ensure the mesh is properly tensioned without warping the frame; * trim and finish the edges cleanly; * reinstall and test the sliding screen door. Please bring all necessary tools, including a spline roller. Please also supply suitable new spline if the existing spline cannot be reused, and state whether this is included in your offer. Door is 2.5M x 1.1m

We recently had glass with build in dog door fitted however we want to change it back to the existing glass which we have kept in our garage. Must be experienced & qualified glazier. Tools required We have the glass ready to go.

Looking for a handyman to help with: - Hanging the tv on the wall - Reinforcing the shelves in the pantry. The shelving does not have enough brackets to support the weight. - Hang 2 x pieces of art