Find experienced local carpenters in Rushcutters Bay

Door needs to be replaced and fixed , wall.seems to be broen next to door (Small budget - can negotiate)

I bought a wood high bar table and it is slightly higher than what I expected. I would like the legs shortened on the table. I bought bar stools to go along with the bar table. The seat height is 67 cm. Upon my rough measuring about 15 cm needs to come off although I would be relying on your professional opinion. Its well below the black bar seen cutting across the lower of the frame.

I need a straight line cut to even out a pervious cut on a thin wood partition. See pics. You willl need to have your own tools.

Travertine table too tall. Top just sits on base but the base needs to be cut down. Probably only need to cut down 5-10cm.

Due to a dishwasher leak the rear side of the kitchen island has warped due to water damage. Now that the leak has been fixed, we want to replace the rear of the island. As you can see in the photos, there are effectively three panels, each around 90cm wide, by 88cm high. So the total island is around 270cm long. The damage only affects two of the three panels, but in order to make it look consistent we presume that all three may need to be replaced.

Hi, I need a carpenter that can assist with adding a number of shelves (already cut to size from a wardrobe company). I need the tool that allows the wholes in the wardrobe of fit the holders for the shelf. I would also like someone to install two bathroom hooks on the back on the bathroom door. Must be qualified carpenter and ensure job is delivered 100%

I have a showroom and need to fit skirting boards very simple design and in white, Will need to be painted white and fitted on with glue preferred, need some one to buy the materials and install - its approx 30 - 40m over all with some cutting and joining needed, can send images ones job approved, not a difficult job. Just needs to clean up the look of the floor edges.

Construct and install L-shape window storage seat Remove skirting and reapply at the front Hinged at the top - 2 separate openings Longest length: 2300 mm Shortest length: ~700 mm Locations: Rushcutters Bay - there is easy trades parking at the back of the building

Skirting where fridge goes taken off so I can fit in the fridge.

Hi there looking to install drawers for my cabinet so food is easily accessible. Width 48.5cm Depth 56.5cm (total depth from back of cupboard to door closure) Height 134cm (total height of shelf/drawer space) We would ideally need 4 drawers.

Integrated fridge door slider mechanism has broken. Supply and fit new mechanism. Cost of part additional to fee.

We are renovating an apartment in Darlinghurst. Inside the apartment there is a metal walkway 85 mm x 3500 which is exposed metal underneath. We would like this boxed in and to cover in with plaster board ready for painting. (See images of metal walkway). As well as a doorway that needs to be trimmed with wood. (See images) The price we have estimated is for your labour, with the cost of materials to be an extra cost to be paid by us. You should have your own tools and ability to pick up materials to complete the task. We can provide parking nearby after you have unpacked your tools provided your vehicle’s height is less than 2 mtrs high. This is an estimated 1 day job, but will pay for extra time so you are not out of pocket.

i need a stainless steel fabricator to make a one off custom trim for domestic kitchen microwave oven

Additional shelves required for wardrobe - all 12mm thick white melamined particle board 1 x 53.5cm x 77cm shelf 2 x 66cm x 45cm shelves 2 x 92cm x 45cm shelves Holes need to be drilled and plugs for holding supplied similar or equivalent to example

Spot cleaning of colour stain (from plastic bag) on floorboards.

Hi, I need to replace my kitchen kickboard for small U shaped kitchen. Ideally want to match cabinetry. I have timber floorboards. Thanks Janey

I need a straight line cut to even out a pervious cut on a thin wood partition. See pics. You willl need to have your own tools.

We have 3 new shaving cabinets which we purchased from IKEA. They are too big for the spaces they have to fit. They need to be altered in one way or another. You can take the measurements and we will give you the shaving cabinets so you can undertake the task in your own workshop. We are unsure of the price of this task and have only placed a nominal estimated value. We think you need to be skilled for this task. We would like this task to be completed by January 2021.

Hi Looking for a carpenter to build a hardwood deck on an apartment balcony. Size of balcony is 7861mm long by 1800mm deep There are two decks, so price to build two. We would like the decks framed up so that they not interfering with the existing tiled deck. Essentially the decking boards will need to sit on a frame. Cost is for labour only, we will pay for the supplies such as screws, hardwood, framing materials. Once we appoint you, you can come and measure up and figure out materials required. Timing would be in the next month. Thanks

We bought a new microwave and the surround piece that colour matches our kitchen no longer fits. A new piece needs to be made to be colour matched to existing. The microwave will need to be levelled as the existing cabient top that it sits on is not straight. It's a fairly small job but keen to get it done.