Find experienced local carpenters in Potts Point

I require help to purchase & pickup wood planks from Bunnings (Total cost of materials is $173.50), cut to specific size and deliver to Potts Point NSW. I will reimburse the full cost of materials by EFT on delivery. (apologies to previous quotes, I was not aware of the fee structure imposed by Airtasker). 4x Specrite 1200 x 600 x 18mm Timber Multi Use Pine Panel (I/N: 0419619) https://www.bunnings.com.au/specrite-1200-x-600-x-18mm-timber-multi-use-pine-panel_p0419619 Cut:100cm x 30cm (with corners cut out 4.5cm x 3.4cm) [4.5cm is cut from the 100cm side, so the length with the corners removed should be 91cm x 23.2cm] 1x3mm MDF Panel Standard 2440 x 1220mm (I/N: 0590054) https://www.bunnings.com.au/3mm-mdf-panel-standard-2440-x-1220mm_p0590054 Cut:200cm x 98cm

Need to reinstall some particle board framing and door cabinetry. The particle board framing screws into plaster board. I have all the materials for the frame and door Would need some plaster board and chip board screws or alike and roughly 30mm. Some white electrical tape to place around edging to look neat at the end would be ideal but not necessary. Shouldn’t take long - ideally have a ladder but I have access to to multiple too. The attached photos of what the door looks like when it’s installed. That’s the exact frame that needs to be reinstalled

Spare room needs shelving. Require 2 x floating timber shelves to be built and installed - Due date: Flexible

Looking for a tradesperson / carpenter to install Ikea kitchen bench top in very small 2x2m kitchen. Cabinetry is in place but will require holes cutting for sink and tap. Simple L-shape layout, includes freestanding areas to be supported by legs in place of full cabinets - see reference photo included. Ready to hire and need to complete before Xmas. Potts Point, 2011 - Due date: Before Thursday, 21 December 2023

Looking for an experienced installer for an apartment in Potts point. Kitchen, wardrobe etc. hourly rate. Early-mid December - Due date: Flexible

Need a small shoe cabinet built but needs a drill for the screws that were provided - Due date: Flexible

Build box around new door install 2 architraves and 18m of skirting Inc material and labour - Due date: Needs to be done on Wednesday, 15 November 2023

Remove the existing shelf and install a new one on the metal wall - Due date: Before Sunday, 12 November 2023

Need 18m of 66 floor skirting, patch ceiling and wall and install cornice around 6m need done happy to discuss further need someone reliable and dependable - Due date: Needs to be done on Thursday, 2 November 2023

Need to cut an 18mm thick piece of pine (length of piece is 800mm) - straight, clean cut - Due date: Flexible

I am after a basic built in bench seat for a window in my apartment. The bench seat would have a hinge top so it can also be used for storage. The Job would be to build the full bench seat, ideally you are also able to bring materials to build the seat - however, I am happy to go and purchase the required materials so it is all here for you, but I would need you to guidance on what to get, happy to have you visit first to check out the space. Photos show the window space as well as the rough measurement of the length of the window bay. Thanks - Due date: Flexible

I have bought a cabinet, that has three sections, I would like shelves made and installed for each section. The cabinet interior is 37.5cm deep and 51.5cm wide, so we would need 3 shelves of that dimension cut and installed in the cabinet. I can provide pictures. - Due date: Flexible

Wooden edge of Verandah door needs fixing down or possibly replacing (like for like) The bit that needs replacing or fixing is the bit between the wood and the carpet only It is approx 4 cm in depth and approx 156cm in length Due date: Flexible

Looking to get cavity doors installed in Potts Point to divide two rooms. The opening is approx 3.7m wide x 2.9m high. There will be a cavity on each side and two doors sliding into each cavity. I also need a regular internal door moved and rehung.

Outdoor timber deck sanding & Re staining 10sqm . I have purchased ultra deck timber oil already in natural . I have sanded 50% already - Due date: Needs to be done on Tuesday, 27 June 2023

Out door timber deck needs sanding and re staining, area is 10sqm - Due date: Before Thursday, 29 June 2023

I need a qualified Cabinet maker to cut and install a space for a slim dishwasher. - The dishwasher will be installed on the left in the images below. - Dimensions of the dishwasher as here: Height: 815mm - 875mm, Width: 448 mm, Depth: 575 mm - Width between the sink bowl and the wall is 460mm. Height between the floor and underside of the cabinet top is 865mm. Depth to the front of the cabinet is 500mm. I'm expecting that the dishwasher will stick out 75mm at the front, which is ok. - Work will involve: Removing the left door, cutting away the cabinet floor and skirting board, cutting the left side of the cabinet, removing the top railing on the left side, and add any required supports for the remaining cabinet and counter top. If you have any questions about the job let me know. - Due date: Flexible

Olive oil stain removal from carpet - Due date: Flexible

Need a carpenter to build & screw into terrace wall a collapsible table. Price is labour only but includes visiting property to visualise space & work out solution. - Due date: Before Wednesday, 17 May 2023

Refurbish an existing laminate kitchen benchtop with a stone option. The rest of kitchen ie cabinets, tiles, appliances remain the same. Looking for someone to measure, order, install - Due date: Flexible