Find experienced local carpenters in Sydney

I need new angled shelving built into my existing cabinetry to display shoes and some folded polo shirts. I have attached an image of the existing cabinetry, and also an example image of something similar to what I'm thinking in terms of the angled shelves. The shelving needs to match the laminate used for the rest of the cabinetry. It is a glossy black wenge by Polytec: https://www.polytec.com.au/colour/black-wenge/ On the left side where the ties are, I want to get ride of the lowest tie bar, and build 2 angled shelves. On the right side where there are already some flat shelves, I need to build either some angled insertable ramps, or modify existing shelving to be at an angle.

Need 3 pieces of wood Each 80cm x 40cm Can be any type of wood, to be used at shoe shelves.

I’m looking for an experienced carpenter, cabinet maker or handyman to supply and install a floating timber desk. Desk Specifications: * Length: 2500mm * Depth: 400mm * Thickness: Open to your recommendation (approximately **20–**30mm) * Finish: Natural timber colour (or similar) * Style: Floating with concealed brackets (no legs) * Wall mounted and securely fixed for everyday use I’m happy for the desk to be made using a SpecRite 2400 × 900 × 33mm Timber Multi Use Pine Panel from Bunnings. Please include in your offer: * Supply of all materials and hardware * Installation * Your recommended timber/material * Estimated timeframe to complete

I have a 60mm diameter hole in a cabinet door (20mm thick) that I want to fill. I have a piece of particle board but I don’t have hole saw or jig saw to cut the piece to plug the hole.

Build diy standing kitchenette

2x carpenters or experienced handymen to remove old ceiling grid system 12m2 then frame out 3x ceilings 20m2 and 1x small hideaway room 2000x1500x1500, this room will need a sheet of plywood installed and will take about 1-2 hours to frame as it’s a bit tricky with pipe work -Ceiling height 3000mm -Timber supplied -You will need your own tools and ladders -loading zone parking outside -11am or after start time Sunday 12/7/26

The fridge is not fitting in new apartment. Need this fixed.

Looking for a couple of roofing carpenters to complete works in Sydney. Potential for ongoing work for the right candidates.

I have a bathroom pocket/cavity sliding door that has come off its overhead track (see photos). I've tried to re-seat it myself without success. There's a wooden trim piece running along the side of the track mechanism that appears to be glued (not just screwed) to the door frame — I attempted to remove the screws but the trim won't budge, which is likely blocking access to the roller/track assembly. This might be a quick fix for someone experienced with sliding/cavity doors, but could also need a bit of carpentry work if the trim has to be carefully freed or replaced. Happy to increase the budget after an onsite look if more work is required. What's needed: -- Assess why the door has come off the track -- Free/remove the glued trim piece without damaging the frame (if needed) -- Re-hang the door and adjust rollers so it slides smoothly Reinstall or replace trim as needed Photos attached showing the door, the track mechanism, and the trim piece.

Got 5 stainless steel benches delivered that need building right now

I’m after a cabinetmaker to build and install a simple cabinet shell and door that replaces an existing shoe unit in the recess behind my front door. What I need: It’s just the outer box (shell) and one full-height door. No internal shelves or anything. We aim to fit ikea wire baskets inside. Key details: • External size: 1600 H x 620 W x 195-200 D mm • No back panel, fixes to the existing wall • Single full-height door, hinged on the lef • White matte flat panel finish to match my kitchen, ideally handleless or push to open • Internal clear width needs to be about 588 mm (so a 16 mm carcass works) A full spec with dimensions, drawings and site photos is attached as a PDF, so please have a look before quoting. Happy to discuss materials and timing. Let me know if you need to do a site measure first.

Carpenter needed to remove part of a bench space in my internal laundry. I am planning on installing a stacked front loader washer and dryer system. I need the marked bench area removed so that this new unit can be installed.

Offer is for a quote. Build a custom joinery against a wall. Will involve two pocket doors- one for an office and one for an actual door.

We require framework on left side of door

Remove sliding drawer and change to 3 x Blum soft close hinges

I want a bathroom cabinet removed and replaced with a bigger cabinet. Old one is 50cm wide, 40 cm high, 15 cm deep. New one is 50cm wide, 60 cm high, 20 cm deep. I’d like to use existing handles. I’d like to add three shelves to bottom of the wardrobe. To use as a shoe rack. The wardrobe has one line of vertical holes for an adjustable coat hanger. I’d like to have another row of holes and three flat shelves added. For shoes only. Open to variations if needed. Thank you.

We’re looking for someone who has a drill and the necessary tools (including anchors) to help install a bathroom cabinet before 5PM today. The cabinet size is 60 x 17 x 75 cm. We’ve already drilled some holes, but they may be too small and might need adjustment. Please let us know if you’re available and your rate. Thank you!

We are a fun & creative client with a Surry hills terrace in need of some touch ups, and with some carpentry projects to do over next few months. Looking for carpenter / cabinet maker / handyman / builder for things like: - hiding cables behind walls/render - fix leaks/waterproofing issues - support design, fabrication and install of new doors (internal and external) - painting and skirting and render patch ups/ clean ups - trade coordination for other projects like painting and electrical work We are not in a major rush, but can move quickly if we can find the right person / skills and supplier connections. Hourly rate or project based pricing, as preferred.

Fixing and repairing timber balcony

Carpenter Needed for Bedroom Renovation (2 Rooms) please read carefully! I’m looking for a skilled and experienced carpenter to complete renovation work in two bedrooms. Scope of Work: - Install wood wall panels (feature wall) - Build and install floating bedside tables - pick up , Cut and install porcelain materials (must have experience with precise cutting) - Assist with installation of a hanging ceiling light (must have electrical knowledge or work alongside a licensed electrician) Requirements: - Must hold a valid carpentry license - Electrical experience preferred OR must be able to coordinate safely with a licensed electrician - Proven experience with similar renovation/carpentry work - Able to provide photos or examples of previous jobs - High attention to detail – clean, precise, and professional finish is essential - Reliable and punctual (no time wasters, please) Site Visit Requirement: - A site visit is required before starting the job to assess the work, confirm details, and ensure you are confident in completing the project to a high standard in Woolloomooloo. Additional Notes: - All work must be completed to a high standard - Please bring your own tools and equipment - Happy to discuss details and measurements on-site If you meet the above requirements, please send through your experience and examples of your previous work. Thanks!