Hire an affordable Carpenter for any job in HMAS Kuttabul

Remove a Build in wardrobe 195^210 and a small wooden bathroom cabinet and take it away

Hi there, I need someone to level a small part of my new apartment. It's only a 15 square metres and I need it to be 10mm thick (so a small job). If you could please send me through a quote or let me know if you are able to do this. (Unsure of what this will cost me so please ignore the $5 - had to write that to be able to post the job.) Thanks, Sophie

Carpenter to build and install bedspace platform with side shelving. Remove old platform.

I have had some laminate mdf sheets cut to size, but need 16mm taken off 2 sheets. The sheet length is 70 x 17cm and 41 x 70cm approximately. The cut will be made on the short edge. One is melamine white, and the other is laminate tasmanian oak. Edge banding the cut side is also required if possible. Depending on your skills, I could add additional scope to assemble the unit (its a small cupboard (70x 41 x 17cm). This would include the fitting of the door (Hetich hinges sourced, and holes drilled for hinges, and a handle). You will need to pick up the pieces and do the cuts offsite. Assembly offsite also if you can do this.

I would like to find someone who can take a design for an air conditioner cover and make it for me. It is to go on a balcony. I will pay for all materials of course, but you will need to buy them as I have no idea what I would need. I look forward to hearing from you.

Carpenter needed to design, build (offsite) and install replacement under bed space storage frame.

I require a small section about 50x 50 of a wall column to be re plastered and re painted Urgently as understand it takes drying and returning to paint sorry I have no images I work off site. Will pay for product on top but you will need to purchase also understand could take longer and we can negotiate once seeing

Hello Felicity, I am looking to have this job done ASAP as the apartment is being painted Thursday coming (unfortunately the work has to be done on a week day not the weekend). The skirting blocks may vary slightly in length and width due to very slight variations in the original architraves throughout the apartment. All skirting blocks will need to be between 30mm-40mm thick (depending on how deep you insert them into the architraves). The skirting block lengths and widths will have to vary slightly. I have listed the 3 dimensions below; 90mm wide x 140mm high 100mm wide x 160mm high 100mm wide x 140mm high If it is too hard to make different variations in the skirting block sizes then just make them all 100mmW and 160mmH and cut them into place. At the end of the day, I'm not too fussy. I just need some form of skirting block installed. The apartment is not going to be featured in Vogue Living. I just need to neaten it up a little before putting it on the market.

Trying to revitalise an outside deck. Need to replace missing piece close to ground. Also close gaps u set stair. Ideally Source matching timber. Measure, cut and Replace the missing pieces before it gets painted next week. Happy to pay for materials on top of budget

I am moving into a new apartment but the fridge cavity is too low for my fridge and the small cabinet/doors above the cavity needs to be cut down 50mm to fit.

Looking to have someone work with me in creating an architectural model. Help with building walls, creating facial, instruction on cutting materials, building structures that can stand up on their own.

I am looking into getting built a simple bookcase/shelf to be built. Approx 150cm x 40cm x 40cm. Split into 3 sections. Using plywood with white laminate with edges cut. Happy to pay extra for delivery.

Need someone with good carpentry and or cabinet making skills to assist. First task is to swap position of Cot bed and Kallax cube storage unit as opposite of current. The Kallax cube storage unit consists of 2 parts, a [Content Moderated] x 4 cube), and a 77 x 144 unit (4 cube). The 147 x 147 unit needs to be disassembled and customed to add 2 keyboard sliding trays (similar to computer keyboard slide but wider). This can be achieve by using drawer slides and cutting a piece of melamine to fit the width of the unit. 2 drawers are required (one for music keyboard, and the other should fit a computer keyboard). This should be at a height of 70+ cm for each of the drawers. The cube section may need some strengthening for this. The current Drawers and Doors will need to be refitted into the customised structure in different locations (to suit). Finally the 4 cube section will need to be cut down to fit in the smaller space. I expect it will be slightly less then 4 cubes wide.

I need 9 pieces of board (measuring 740mm x 275mm) cut from 9mm mdf, quickly sanded down on the edges to take away any splinters, delivered to Potts Point. The type of MDF I want to use is the following: CustomWood MDF 1200 x 900 x 9mm Standard MDF Panel at 19$ a board from Bunnings - Item no: 0590084. This task includes: - Providing the wood (the cost of materials is included in the price) - Accurately cutting it to size (it needs to fit inside a cabinet) - Sanding down the edges - Delivering to Potts Point. I'm not precious about where the mdf comes from. If you have a spare sheet laying around at home as long as it's the same type of stuff (mdf, 9mm) and in newish shape (not waterdamaged, stained and is reasonably clean) it's good to use. You also don't need to install these boards for me. I am envisioning delivery as meeting you on the street with a trolley, unloading the boards and me quickly going through with a tape measure to make sure it's accurate.

Small one bedroom apartment Kings Cross IKEA kitchen - plan available if in ballpark price - Include removal old kitchen and preparation for installation - estimate 1 day work est 8hrs (+ on costs itemised) - Quote to include trades in itemised quote (tiler, electrician, plumber) Include installation of IKEA kitchen estimate 2 day work - est 18hrs

To build a sliding door/wall To sheet up a very small basement Insert a window Two new doors to go in Bits an pieces At shop in Potts point

Consisting of the following tasks: 1) supply 16mm white melamine mdf - 3 pieces - 619mm x 386mm - edged all sides (measurements cited are final size including edging) 2) drill dowel holes in the 3 pieces (12 approx per piece) 3) use the customised pieces to finish the assembly of Ikea Kallax unit (147 * 77) 4) assemble a small cube unit using custom pieces (needs drilling etc) - i have some suitable screws - may need more 5) fix the storage units to wood frame (free standing - just to prevent tip over) 6) install 4 x drawer inserts for ikea kallax frame 7) assemble 2 x ikea goodmorgon mirror cabinets (900mmx400mm) and wall mount (brick wall) If you can't supply the melamine pieces, I can source if need be. Need this work done tommorow.

I've just moved into a place and hoping to see if there's someone who can cover a corner wall which has existing felt fabric (which cannot be removed). One panel is roughly 2m x 1.5m, and the other is roughly 1.5m x 1.5m (estimated) The idea is to get two white panels which seem like a wall, and on the ends, to hook in to secure them on top of the existing felt.

Hello ! I would need 12 boxes of cement fibre underlay with the appropriate nails (big box), one box of senso vinyl planking, and some flooring glue from bunnings. See the photos, you would need exactly those ! I’ll pay you back via pay ID PayPal or cash Thank you !

I need a customised Murphy (wall) bed that is a non standard size to fit in a small space. The hardware kit is shown here: https://www.wallbedbrisbane.com.au/products/diy-wall-bed-kit-wall-bed-brisbane My preference is for Melamine MDF used for this project. I can assist with sourcing the material if necessary, however the person running this project will need to adjust the cutting list to fit the required size. I will need to ensure that the maximum foldout dimension of the bed does not exceed 1950mm (we can confirm this more precisely). I will source a custom sized mattress to fit the smaller bed size. You will need to arrange to assemble the materials onsite. I will also want to install the desk kit. https://www.wallbedbrisbane.com.au/products/alpha-bed-with-desk-wall-bed-brisbane This job will need to be completed over the next 7 days subject to hardware availability which i will confirm.