Find experienced local carpenters in Sydney

We need a skilled carpenter to create the joinery design for our up and coming bakery in Marickville. We would also require their assistance in installing a few wall hangings.

Carpenter Required – Super King Bed Frame Reinforcement | Botany NSW 2019 Seeking an experienced carpenter or furniture specialist to structurally reinforce an existing timber super-king bed base, fixing slats, and retaining the black outer frame and headboard Scope of Work: 1. Replace half the timber slats (existing size: 183 × 7.1 cm), increasing slat quantity if required for optimal mattress support. 2. Install a reinforced centre support beam with at least 3 support legs, subject to inspection. 3. Strengthen side rails, corner brackets and loose joints. 4. Secure all slats to eliminate movement, rattling and squeaking. 5. Ensure a level, durable, ventilated base compatible with an Ecosa CoolComfort Super King mattress. Dimensions: Mattress 203 × 203 cm; outer frame approximately 210–220 cm wide. Quote Required: Competitive fixed price including labour, materials, proposed reinforcement method, completion timeframe and availability. Objective: A strong, stable, squeak-free, long-lasting bed base—not temporary repairs. Photos available. Experienced tradespeople only with examples of their work similar to this job.

Change of door handles which need to be fitted, slightly bigger than the old ones

We are updating our outdoor laundry/ bathroom. We have tiled and painted and prepared the room. We are looking for someone to install IKEA flatpack cabinets and Benchtop on Thursday. There are 6 cabinets in total. The cabinets things either two big drawers or a door. Benchtops are timber and need to be cut to size.

Hi. I need 15 record crates built. I’ve attached an image of the design and dimensions. Looking at plywood and powder coated steel as materials. Budget is negotiable.

I need to get brackets for two shelves inside the cabinet shown. I've also included the dimensions from the designer who had it made. I have 2 shelves cut to size. Top shelf is 6mm thick clear glass. Bottom shelf is 6mm thick black acrylic. Ideally I think 3 or 4 shelf supports along each side of each shelf would be great. The thickness of the side walls is 18mm. Made from a material known as lumber core in Japan, and is strong enough for drilling, etc. If possible I'd like it so that the holes for the internal shelf brackets are not drilled all the way through the side walls of the cabinet. Please let me know if you can do it. Needs to be done tonight between 6pm - 9pm. Last offer will be $185

Need kitchen bench cut to suit new sink (timber bench)

* Exact measurement are required on site before building. Rough details below: * Build the frame and carcass for an L-shaped counter, 900 high: * Front counter: about 3660 long × 600 deep, along the front window. * Coffee counter: about 1760 long × 700 deep, running from the front counter to the back wall. * Leave open bays underneath for three under-counter fridges: * 1200 food fridge * 900 bar fridge * 1200 milk fridge * Build open shelving for cups beside the food fridge. * Cut and fit the benchtops. I'll supply Specrite panels from Bunnings, and they'll need to be cut to shape, joined at the corner and edged. The look
I'd like the customer-facing front to look like a beautiful Parisian bar counter, with panelled or moulded detailing and a quality finish. I'm open to your ideas, so please share photos of similar work if you have them. Good to know * It's a food business, so surfaces need to be sealed and easy to clean. * I have scaled drawings with all the bay sizes, which I'll send to shortlisted taskers. * Please include in your offer how long the job will take and whether materials for the frame are included.

I need a carpenter to source thick, proper timber shelves, cut them to size and install four evenly spaced shelves in the narrow nook shown in the photos. The shelves should be substantial, solid wood and not thin boards, and fixed securely across the back wall. The first two photos show the real space, and the third is a concept image of the finished look. Measurements: the wall length is 95 cm and the wall is 31 cm wide. The shelves should be floating shelves (no visible brackets).

MUST BE COMPLETED TOMORROW. Looking for an experienced, insured carpenter to supply and install structural timber backing for 3 floating shelves. Shelf installation will be done separately. SCOPE OF WORK Supply 6 timber noggins (structural-grade timber or LVL): - 4x 570mm long x 70mm deep x 120mm high - 2x 420mm long x 70mm deep x 120mm high Final lengths to be confirmed on site. Install all 6 noggins securely between existing timber wall studs, flush with stud faces, using suitable structural fixings to resist twisting and shelf loads. Cut and remove plasterboard to access studs for 2 noggins. The other 4 are already accessible. Electrical wiring is present, so care is essential. NOT REQUIRED: Plasterboard reinstatement, plastering, painting, tiling or shelf installation. REQUIREMENTS - Available tomorrow, Friday 16 October - Current public liability insurance - Quote includes all materials, fixings, labour and cleanup Photos of existing wall and proposed layout attached.

Hang 2 small stainless steel shelves, and unscrew picture screws in living room

Looking for an experienced carpenter, joiner, or heritage window specialist to repair the damaged internal timber rail/glazing bar on a timber sash window. Either splice in replacement timber / use an epoxy wood-hardening and filler system or replace the damaged section cleanly, sand flush, and prime/paint to match the existing white finish.

I need a small section cut out of a kitchen cabinet shelf to fit my new refrigerator into place, in Pyrmont . The cabinet is above the fridge and only half depth, so only the front portion of the shelf needs a notch cut. The cutout needs to be roughly six inches by six inches to clear a raised cap on top of the fridge. This should be a short job for someone experienced with carpentry or cabinetry who has their own tools. Ideally completed this coming weekend. Budget around 80 to 150 dollars, happy to discuss based on your quote.

Cut down joinery 100mm on the left. Must have proper equipment and experience

Carpentry. Replace a 100mm dia. Pine log pergola beam that has rotted and split in half. The pine log is approx. 3.5m long and notched at each end and fixed to supports. We will place this inside of the polycarbonate roof so the beam doesn’t rot out again.

Install cabinet doors Doors are Kaboodle from Bunnings, hinges are provided. 2 x doors are 2005mm high x 637mm width The door frame is 1282mm wide x 2022mm The doors are made to measure for a pantry style laundry. Bunnings order is pictured for reference

Cabinet door hinge has come away due to the holes too big for the screws. Door and hinge are fine, just need reinforcement within the holes. I don’t have the tools or parts, so looking for someone who can bring the necessary equipment to reinforce the door onto the cabinetry. Please include any additional payment required for parts.

Hi we need a carpenter today to: - make a coffee bar benchtop slightly bigger - remove 1 post to fit a drinks fridge underneath the coffee station

IKEA cabinet is too tall for space and we need to cut 5mm off. Circular saw required will need to bring with you

I need the base of a new dresser fixed, after it was damaged upon delivery